- Step 1: Figure out how much Milestone Herbicide you need by calculating the size of the treatment area. ...
- Step 2: Fill the spray tank with half of the amount of water required then add in the appropriate amount of Milestone Herbicide. ...
- Step 3: Spray the application to targeted areas where weeds are growing, preferably on a fan spray setting for uniform coverage. ...
What is the mix rate for Milestone herbicide?
The mix rate for Milestone Herbicide varies depending on the problem weed and the area you are looking to treat. Make sure not to exceed 7 oz. of Milestone applications per acre per year. To prepare the spray, add about half the required amount of water in the spray tank.
What weeds does milestone kill?
Milestone controls many annual, biennial and perennial weeds at low use rates (4 to 7 ounces per acre). It also provides excellent postemergence and season-long residual control. And it can be applied up to the water’s edge and control weeds where many species often thrive. Refer to the Product Label for complete product efficacy information.
How do you use milestone?
Milestone gives vegetation managers and applicators exceptional flexibility. Use it in almost any treatment method-such as broadcast, foliar, spot, cut-stump, basal, guardrail side trim and dormant-stem-or as a complement with grass herbicides for total vegetation control.
Will milestone herbicide kill kudzu?
BEST ANSWER: Not Familar with the weed Kuduz, used Milestone to control Canadian Thistle, It did a very good job of controlling that. The Milestone Herbicide will provide great control of the Kudzu it is recommended to apply 7 oz per acre of area.
How much milestone do you use per gallon of water?
BEST ANSWER: I typically use 1/4 ounce of Milestone per gallon, so you would need 3 3/4 oz. (or just round it up to 4).
How long does milestone stay in the soil?
Fast acting: weeds begin to die 24 hours after application. It's damnation to thistles. Because it also kills by root uptake, and remains active in soil for up to a year, and sometimes even more, NOT TO BE USED OVER ROOT SYSTEMS OF DESIRED BROADLEAF (DICOT) PLANTS (that includes trees).
How long does Milestone herbicide take to work?
four to eight weeksWithin hours or days of application, the stems and leaves of labeled weeds stop growing and turn brown, with few exceptions. Most annual susceptible weeds will be controlled within four to eight weeks after application; however, complete control of main stems and roots may take longer.
Can milestone be used near water?
You may also contact 1-800-992-5994 for emergency medical treatment information. Do not apply directly to water. Take care to minimize the incidental overspray along the shoreline when applying to terrestrial plants at the water's edge or to water in areas where surface water is present.
When should you spray a milestone?
Apply when weeds are small and actively growing. Apply using aerial equipment (minimum of 19 L spray volume/ha) or ground equipment (minimum of 100 L spray volume/ha) that will assure uniform coverage.
Is Milestone herbicide safe around trees?
Milestone® herbicide goes easy on desirable species, including most forage grasses and many deciduous trees, forbs and other plants.
Is Milestone toxic to humans?
The total amount of Milestone used in wheat cannot exceed 0.57 fl oz per acre (0.009 lb a.e./A) per growing season. Acute toxicity data indicate that aminopyralid has low toxicity via oral, dermal and inhalation routes of exposure.
Does milestone have a residual?
With its unique active ingredient – aminopyralid – Milestone controls annual, biennial and perennial weeds like no other land management herbicide. Milestone has systemic plus residual activity that makes it equally effective at multiple growth stages.
Is Milestone herbicide restricted?
Milestone has been reviewed and registered under the Reduced Risk Pesticide Initiative of the U.S. Environmental Protection Agency. It can be utilized across nearly all vegetation management sites, including wetlands and certain aquatic settings. Milestone won't harm most desirable grasses and forbs.
Can milestone be used on lawns?
Milestone Specialty Herbicide is labeled to treat Japanese Stiltgrass but is not labeled for use in residential lawns.
Is Milestone a broadleaf herbicide?
Milestone is a herbicide designed for the management of invasive species and broad-spectrum, broadleaf weed control for roadside, rights-of-way and other non-crop vegetation control.
Who Makes Milestone herbicide?
Dow AgroSciencesMilestone Specialty Herbicide is a new liquid formulation herbicide from Dow AgroSciences designed and developed specifically for use on rangeland and pastures to control noxious and invasive broadleaf species and other problem weeds. Sold Individually, Case Qty. = 2 x 2.5 Gal., Pallet Qty.
Can milestone be used on lawns?
Milestone Specialty Herbicide is labeled to treat Japanese Stiltgrass but is not labeled for use in residential lawns.
Is Milestone a broadleaf herbicide?
Milestone is a herbicide designed for the management of invasive species and broad-spectrum, broadleaf weed control for roadside, rights-of-way and other non-crop vegetation control.
Does milestone control leafy spurge?
Aminopyralid is the active ingredient in herbicide products such as Milestone. It is broadleaf selective (safe on grass) and can provide some control of Leafy Spurge if applied in the early summer when the small true flowers form. Imazapic is the active ingredient in herbicide products such as Plateau.
What is Opensight herbicide used for?
For control of susceptible weeds and certain woody plants, including invasive and noxious weeds, on rangeland, permanent grass pastures (including grasses grown for hay*), on non-cropland areas including industrial sites, rights-of-way (such as roadsides, electric utility and communication transmission lines, pipelines ...
What is Milestone used for?
Environmental Protection Agency for use in treating vegetation in areas grazed by livestock and has no grazing restrictions, and it can be applied to the water’s edge.
What is Milestone herbicide?
Milestone ® herbicide is labeled for consistent and dependable control of susceptible woody brush and weeds. A liquid formulation, it delivers increased efficacy when tank-mixed. Milestone enhances control of tank mixes in nearly any application, and it improves hardwood and conifer control. And the residual control of Milestone reduces the number of treatments needed.
Is Milestone herbicide invasive?
The most flexible herbicide available. Milestone ® herbicide offers excellent invasive weed control, across a wide variety of use sites. It does so with little-to-no damage to grasses, forbs or other key members of the native plant community, allowing native habitats to be restored to their full potential. Jump to: Benefits Use sites Controlled ...
Does Milestone kill grass?
Milestone has been reviewed and registered under the Reduced Risk Pesticide Initiative of the U.S. Environmental Protection Agency. It can be utilized across nearly all vegetation management sites, including wetlands and certain aquatic settings. Milestone won’t harm most desirable grasses and forbs. It preserves most warm- and cool-season perennial grasses over the long term, helping to establish desirable plant populations.
Is tank mix compatible with other products?
It is tank-mix-compatible with essentially any other product and at any rate and ratio that may be required. It can be used to pursue weeds and brush on grazed areas and wildlife openings, to help restore native habitats and to promote desirable grass and forb growth.
Can you add videos to your watch history?
Videos you watch may be added to the TV's watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
What is Milestone herbicide?
Milestone ® herbicide is the most flexible herbicide available for rangeland and pastures. It provides superior, yet selective, control of many noxious and invasive weeds, including thistles, knapweeds and yellow starthistle.
How much Milestone weed control per acre?
Milestone controls many annual, biennial and perennial weeds at low use rates (4 to 7 ounces per acre). It also provides excellent postemergence and season-long residual control. And it can be applied up to the water’s edge and control weeds where many species often thrive.
When to treat weeds with herbicide?
Treat when weeds are actively growing and not stressed by drought or other conditions. Increase the herbicide rate within the labeled rate range as the season progresses and plants become more mature.
Is Milestone herbicide selective?
Effective, yet selective. Milestone ® herbicide goes easy on desirable species, including most forage grasses and many deciduous trees, forbs and other plants. It also helps restore diversity in areas overrun by many noxious and invasive weeds without posing a long-term threat to many of the plants that help comprise that diversity.
Can Milestone herbicide be used on alfalfa?
Milestone Specialty Herbicide can be used in grass pastures as directed on the product label; however, it is not safe to use on desirable alfalfa or other desirable broadleaf crops or plants. Milestone is labeled to control rush skeletonweed, but it would also harm the alfalfa. This article is from Washington and not Idaho, but it has great information about this plant. This site has local information for you about this and other weeds. We also recommend you contact your local Cooperative Extension for reporting and for assistance with this invasive plant.
Can Milestone kill rush skeleton weed?
Will Milestone Specialty Herbicide kill rush skeleton weed in a summer alfalfa/grass pasture without killing the alfalfa? A. Milestone Specialty Herbicide can be used in grass pastures as directed on the product label; however, it is not safe to use on desirable alfalfa or other desirable broadleaf crops or plants.
What is Milestone herbicide?from corteva.us
Milestone ® herbicide is the most flexible herbicide available for rangeland and pastures. It provides superior, yet selective, control of many noxious and invasive weeds, including thistles, knapweeds and yellow starthistle.
How long does Milestone herbicide last?from solutionsstores.com
Milestone Herbicide will last for 3 to 5 years when stored in a cool, dry place. A 32 ounce bottle of Milestone Herbicide can treat at least 8 acres of land when applied at a moderate rate of 4 oz per acre. Targeted plants should show signs of yellowing and death within a few days.
How to determine the amount of Milestone herbicide needed?from solutionsstores.com
Step 1: Figure out how much Milestone Herbicide you need by calculating the size of the treatment area. To do this, measure and multiply the area's length x width to get the total square footage to be treated . To get the acreage, divide the total square footage by 43,560. Milestone spot treatments should be applied at a rate of no more than 7 fl. oz. per acre in at least 20 gallons of water. The liquid amount varies depending upon the height of vegetation being sprayed. For example, you would need more liquid for taller vegetation and less liquid for vegetation that has been freshly cut prior to application. How much Milestone you need also depends upon what type of application you want to conduct and the size of the treatment area.
What weeds did Kuduz use to control Canadian thistle?from solutionsstores.com
BEST ANSWER: Not Familar with the weed Kuduz, used Milestone to control Canadian Thistle, It did a very good job of controlling that.
What is the best herbicide for creeping Charlie?from solutionsstores.com
BEST ANSWER: Best options to control your creeping charlie, is to use the recommende products listed: Dicamba, triclopyr, MCPP, 2,4-D or 2,4-DP applications for creeping Charlie control should be made when plants are actively growing. A mid to late autumn herbicide application (after the first frost) is often particularly effective.
How long to wait to use Milestone herbicide?from solutionsstores.com
Always wear the proper personal protective equipment (PPE) when mixing and when making applications with Milestone. Do not enter treated areas for at least 12 hours.
How much Milestone weed control per acre?from corteva.us
Milestone controls many annual, biennial and perennial weeds at low use rates (4 to 7 ounces per acre). It also provides excellent postemergence and season-long residual control. And it can be applied up to the water’s edge and control weeds where many species often thrive.
What is Milestone herbicide?from domyown.com
Milestone ® herbicide is the most flexible herbicide available for rangeland and pastures. It provides superior, yet selective, control of many noxious and invasive weeds, including thistles, knapweeds and yellow starthistle.
How long does Milestone herbicide last?from solutionsstores.com
Milestone Herbicide will last for 3 to 5 years when stored in a cool, dry place. A 32 ounce bottle of Milestone Herbicide can treat at least 8 acres of land when applied at a moderate rate of 4 oz per acre. Targeted plants should show signs of yellowing and death within a few days.
How to determine the amount of Milestone herbicide needed?from solutionsstores.com
Step 1: Figure out how much Milestone Herbicide you need by calculating the size of the treatment area. To do this, measure and multiply the area's length x width to get the total square footage to be treated . To get the acreage, divide the total square footage by 43,560. Milestone spot treatments should be applied at a rate of no more than 7 fl. oz. per acre in at least 20 gallons of water. The liquid amount varies depending upon the height of vegetation being sprayed. For example, you would need more liquid for taller vegetation and less liquid for vegetation that has been freshly cut prior to application. How much Milestone you need also depends upon what type of application you want to conduct and the size of the treatment area.
What weeds did Kuduz use to control Canadian thistle?from solutionsstores.com
BEST ANSWER: Not Familar with the weed Kuduz, used Milestone to control Canadian Thistle, It did a very good job of controlling that.
What is the best herbicide for creeping Charlie?from solutionsstores.com
BEST ANSWER: Best options to control your creeping charlie, is to use the recommende products listed: Dicamba, triclopyr, MCPP, 2,4-D or 2,4-DP applications for creeping Charlie control should be made when plants are actively growing. A mid to late autumn herbicide application (after the first frost) is often particularly effective.
How long to wait to use Milestone herbicide?from solutionsstores.com
Always wear the proper personal protective equipment (PPE) when mixing and when making applications with Milestone. Do not enter treated areas for at least 12 hours.
How much Milestone weed control per acre?from corteva.us
Milestone controls many annual, biennial and perennial weeds at low use rates (4 to 7 ounces per acre). It also provides excellent postemergence and season-long residual control. And it can be applied up to the water’s edge and control weeds where many species often thrive.
How to calibrate a backpack sprayer?
Backpack sprayers are fairly easy to calibrate. Fill the tank half full of water - it is not important whether it is exactly 1/2 or not but you must know exactly how much water you put into the tank. Pump the sprayer up to pressure (some have a pneumatic valve - a tire valve - that allows one to use a compressor to pump to pressure while other must be pumped each time to spray) and spray a known area with the water in the tank. I suggest measuring out 100 to 200 square feet - but again a known area - then spray that just as if you were going to spray a patch of weeds. You knew how much water you put in the sprayer, now measure how much is left after spraying the known area and that is how much water it took to cover 100 square feet (or whatever size area you choose). Now you can determine sprayer output in gallons per acre:
How many gallons does a sprayer hold?
Your sprayer holds 4 gallons and at 23 gal/A sprayer output, a full tank would cover the following area:
Can you use Milestone and Telar as a percent solution?
Milestone and Telar are very low use rate herbicides and do not lend themselves easily to be applied as a percent solution - it is simply too easy to over-apply or under-apply - I suspect you did the latter. You should calibrate your sprayer so you know precisely the area it will cover and then you can make an appropriate mix. Below are directions to calibrate but with this said, it likely will be easier to do this if we can visit over the phone - details for that at the end of this response.
