Insert the new shutter lock fastener into the shutter and the hole in the wall. Tap the head of the fastener with a hammer until it is flush against the shutter. The silicone caulk will seal around the shutter lock as well as provide better grip for the fastener.
How do you fasten shutters to the wall?
Typically the shutter fastner will be just under 3" long. Grasp the shutter fastener supporting shank and push it through the shutter hold and into the wall surface. Tap the shutter fastener gently with a hammer to snug the shutter against the siding.
How do I replace a shutter lock fastener?
Replacing a shutter lock fastener involves filling the hole in the wall to give the new fastener an opportunity to grasp the hole and secure the shutter. Sorry, the video player failed to load. (Error Code: 100013) Set up a step ladder under the shutter so you are able to reach the loose or broken shutter lock without stretching.
Why choose shutter-Lok?
Easy installation—and a color-through design that doesn't scratch, flake or fade—make Shutter-Lok fasteners a reliable, secure choice. Available in 12-pack bag or bulk (1000 pieces).
What type of caulk should I use around the shutter lock?
The silicone caulk will seal around the shutter lock as well as provide better grip for the fastener. Avoid enlarging the hole as shutter lock fasteners are available in one diameter.
What is a shutter lock?
How to fix a broken shutter?
Who is the author of The American Chronicle?
About this website
How do you use shutter fasteners?
Grasp the shutter fastener supporting shank and push it through the shutter hold and into the wall surface. Tap the shutter fastener gently with a hammer to snug the shutter against the siding. Do not over tighten, or this will cause the shutter to dimple.
Should I use shutter spikes or screws?
Screws are primarily used to attach outdoor shutters to wood and other soft siding. Spikes are designed to secure shutters to masonry, brick, stucco, hardboard or other hard surfaces.
How do you install shutter clips?
0:442:18How to Install Exterior Shutters - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt on through the holes and Mark where you want to position your screws. If you're installing intoMoreIt on through the holes and Mark where you want to position your screws. If you're installing into wood like we are here what you're gonna want to do is drill some pilot holes.
How do you install exterior shutter fasteners?
0:371:42How to Install Exterior Shutters | The Home Depot - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a multi-purpose 1/4 inch bit to pre-drill the holes keep in mind if your shutters are large youMoreUse a multi-purpose 1/4 inch bit to pre-drill the holes keep in mind if your shutters are large you may require additional mounting holes. Now reposition the shutter on the wall.
What size hole do you drill for shutter fasteners?
¼"Keep shutter fasteners aligned uniformly by drilling ¼" holes into the shutter and 2½" into the wall. On brick, position holes over mortar joints.
What screws to hang shutters with?
Painted metal screws are commonly used by home improvement contractors to install exterior shutters. They work great when you are mounting exterior shutters on siding or real wood.
How are shutters attached to siding?
1:302:36How to Install Vinyl Shutters on Exterior Windows with ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipDrill an 8 inch diameter hole 1 and 3/4 inches deep at each of the points. Although shutter slightsMoreDrill an 8 inch diameter hole 1 and 3/4 inches deep at each of the points. Although shutter slights are preferred screws can be used to install on brick.
How do you remove shutter clips?
0:081:52Remove Shutter Spikes & Replace Vinyl Shutters - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe used a standard pry bar for this effort newer stronger spikes may pull out intact. While otherMoreWe used a standard pry bar for this effort newer stronger spikes may pull out intact. While other older more frail spikes may break in the process like what happened.
How many screws do shutters need?
For shutters up to 55", use four screws per shutter. For shutters 55" and over, use six screws per shutter. See figures at right. For use on any surface including: wood, aluminum, vinyl, stucco, hardboard, brick, fiber cement, or masonry.
How are shutters attached to brick?
2:387:36Attaching Shutters To Brick Homes - YouTubeYouTubeStart of suggested clipEnd of suggested clipBy the screw penetrating it and that will hold the shutters in place with that done I'm going toMoreBy the screw penetrating it and that will hold the shutters in place with that done I'm going to test and make sure my anchors are large enough they do fit a little bit loosely in the holes.
How do you hang shutters on vinyl siding without drilling?
If mounting the shutters to vinyl siding, use exterior shutter fasteners, which lock the shutter to the house while allowing them to expand and contract without damaging the shutter or the vinyl.
How do you attach wood shutters to vinyl siding?
Step-by-Step Guide to Install Shutters on Vinyl SidingStep 1: Measure your windows. ... Step 2: Check for the right screw length. ... Step 3: Drill pilot holes in the shutters. ... Step 4: Drill holes in the siding. ... Step 5: Install spacers. ... Step 6: Attach the shutters.
How do you tighten vinyl shutters?
2:024:22How to tighten the louvres on your plantation shutters - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's simply a matter of getting a Phillips head screwdriver that will fit in the hole. And turn theMoreIt's simply a matter of getting a Phillips head screwdriver that will fit in the hole. And turn the screw clockwise to tighten or anti clockwise to loosen.
How do you hang shutters on vinyl siding without drilling?
If mounting the shutters to vinyl siding, use exterior shutter fasteners, which lock the shutter to the house while allowing them to expand and contract without damaging the shutter or the vinyl.
How do you attach shutters to brick?
After you've drilled all the holes in the brick with the hammer drill, place a shutter fastener into each of the holes in the shutter. Line up the fasteners with the holes in the brick, then gently tap the fasteners in with a hammer to attach the shutter to your home's exterior. That's it!
Should I paint before installing shutters?
Certainly, don't install your new plantation shutters until the painting is completed. It's likely that the inside of your window frames is painted in your old color, and you'll want to make sure they are painted in the new colors before you install the shutters.
How to remove broken shutter fasteners from brick?
Shutter-lok fasteners are just made out of plastic (polypropylene), and typically anchor into a 1/4" predrilled hole. They should not be hard at all to drill out with a sharp 1/4" drill bit.. An alternative is to:
How can I extract broken off shutter-lok fasteners from brick?
Stack Exchange network consists of 182 Q&A communities including Stack Overflow, the largest, most trusted online community for developers to learn, share their knowledge, and build their careers.. Visit Stack Exchange
SHUTTER LOK PLACEMENT INSTALL INSTRUCTIONS
SHUTTER LOK PLACEMENT INSTALL INSTRUCTIONS Shutters Smaller Than 47” * Shutters smaller than 47” require 4 shutter loks Shutters Larger Than 47”
What is a shutter lock?
Shutter lock fasteners are plastic pins that have ridges on the shank. The ridges grip the inside of the hole in the exterior wall. Over time, a shutter lock or two becomes loose, requiring replacement. This usually occurs in one of the upper corners due to wind or pressure from snow buildup.
How to fix a broken shutter?
Step 1. Set up a step ladder under the shutter so you are able to reach the loose or broken shutter lock without stretching. If the ground is unstable, ask a friend to hold the step ladder while you replace the shutter lock fastener.
Who is the author of The American Chronicle?
ABOUT THE AUTHOR. Kenneth Crawford. Kenneth Crawford is a freelance writer with more than 10 years of experience. His work has appeared in both print and online publications, including "The American Chronicle.". Crawford holds an associate degree in business administration from Commonwealth College.
How long should a shutter fastner be?
Typically the shutter fastner will be just under 3" long . Grasp the shutter fastener supporting shank and push it through the shutter hold and into the wall surface. Tap the shutter fastener gently with a hammer to snug the shutter against the siding. Do not over tighten, or this will cause the shutter to dimple.
How to remove shutter spikes?
Simply use a pair of snips and slide them behind the shutter to cut the shutter spike off at the shank.
Special offers and product promotions
Create your FREE Amazon Business account to save up to 10% with Business-only prices and free shipping. Register today
Product Description
Builders Edge Shutter-Lok patented fastening system makes installation fast and easy. Shutter-Lok holds in any material: Vinyl, stucco, brick, fiber cement. Shutter-Lok features a durable copolymer construction with molded-through color so that there is no paint to ever scratch, flake, or fade. Installation requires drill with 1/4'' masonry bit.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
What is a shutter lock?
Shutter lock fasteners are plastic pins that have ridges on the shank. The ridges grip the inside of the hole in the exterior wall. Over time, a shutter lock or two becomes loose, requiring replacement. This usually occurs in one of the upper corners due to wind or pressure from snow buildup.
How to fix a broken shutter?
Step 1. Set up a step ladder under the shutter so you are able to reach the loose or broken shutter lock without stretching. If the ground is unstable, ask a friend to hold the step ladder while you replace the shutter lock fastener.
Who is the author of The American Chronicle?
ABOUT THE AUTHOR. Kenneth Crawford. Kenneth Crawford is a freelance writer with more than 10 years of experience. His work has appeared in both print and online publications, including "The American Chronicle.". Crawford holds an associate degree in business administration from Commonwealth College.
