Uses Tenax Travertine filler is used to horizontally repair, rebuild, glue, and fill travertine, as well as similar stones. Tenax Travertine filler is a semisolid consistency that is smooth and easy to spread. It is used to fill all size holes in travertine and will accept a polish.
Full Answer
How do you fix travertine holes?
The strength of the stone can be bolstered by using one of our travertine fillers to reinforce it. By filling travertine holes, you can highlight the natural beauty of the stone while preserving its strength. Brown travertine filler is used to repair, rebuild, glue, and fill travertine, as well as similar stones on horizontal surfaces.
What is travertine filler?
Travertine Filler is a semisolid consistency that is smooth and easy to spread. It is used to fill all size holes in travertine. It accepts a polish. Not suitable for temperatures below 32°. Recommended for interior use.
What colour resin should I use to fill holes in travertine?
The Tenax epoxy resin comes in a straw colour to fill holes in your Travertine floor. This colour may match your floor and is most likely the best colour for most floors.
Can you use grout to fill in travertine?
There are a couple of different approaches when it comes to filling holes in travertine. One approach is to select a complimentary color or matching color of grout and fill it using grout. The challenge with using grout is that it may not stay in the hole. It could come out in the future.
How do you use travertine filler?
0:576:58How to Fix Holes in Travertine - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's just a little bit thinner than toothpaste. We want it where the product is stay on the end ofMoreIt's just a little bit thinner than toothpaste. We want it where the product is stay on the end of the stick without running off. But it's extremely pliable.
What do you use to fill holes in travertine?
To fill the holes in tumbled travertine, we recommend using a pre-packaged grout in a complimentary colour to the stone. We do not recommend grouting travertine with a sand/cement mix as this will discolour quickly – the coloured grout option will work best.
What is travertine filler?
Tenax Travertine filler is a semisolid consistency that is smooth and easy to spread.
How often does travertine need to be sealed?
Travertine is known as a durable and rugged natural stone, but even the toughest materials need some TLC. Take good care of your outdoor travertine tile by sealing it every one to two years to keep it protected from damage and looking fresh.
Do you grout the holes in travertine?
These holes help to give travertine its characteristic look and finish. The holes can be filled with grout during the grouting process to help stabilize the stone, help keep it clean and give it a finished appearance, or left unfilled to provide a more natural look.
Can I use grout to fill holes in travertine tile?
0:326:24How to fill holes in travertine using non sanded grout DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou will need a grout float. This is what you use to press the grout into the hole you will need aMoreYou will need a grout float. This is what you use to press the grout into the hole you will need a sponge.
What is Tenax used for?
Tenax Mastic 3G Coloured (Solid / Liquid) For gluing and filling the cracks and gaps of marble, onyx, and other stones.
What is the best sealer for travertine?
To seal travertine pavers, use a water repellent siloxane-based sealer like Masonry Saver Heavy Duty or SuperSeal M. This will help the pavers to resistant moisture and UV rays and keep them from weathering.
Why does my travertine have holes?
ANSWER - Travertine stone naturally has open holes within it as it is a fresh water sedimentary stone where naturally water runs through it. Although sometimes people install this stone without filling those holes if they like that look; particularly on walls in dry areas.
How do you clean travertine before sealing?
5:117:57How to clean and seal a travertine shower - YouTubeYouTubeStart of suggested clipEnd of suggested clipClean it with some soap scum remover. And some mold or mildew remover because I did have some spotsMoreClean it with some soap scum remover. And some mold or mildew remover because I did have some spots ahead that needed it and. So when I clean it I scrubbed it with a nylon brush.
Should you seal travertine before grouting?
Applying clear sealer or enhancer is recommended on travertine before grouting, so that the grout color does not penetrate the travertine tiles. Use clear sealer or enhancer as a grout release to insure a clean surface.
Can I use vinegar on travertine floors?
Don'ts of Travertine Cleaning Never use general floor cleaners or vinegar: Avoid using general floor cleaners or 'green' alternatives such as vinegar. The acidic nature of these products can eat away at the surface of travertine stone and dull the finish over time.
How do you fix a hole in natural stone?
Hitting the edge of a counter or dropping something heavy on the granite, marble or other natural stone could cause a chip or hole that requires filling. Repairing chips, spalls, and holes in the stone's surface requires a polyester, epoxy, or cement-based filler material with color added to match that of the stone.
Why does my travertine have holes?
ANSWER - Travertine stone naturally has open holes within it as it is a fresh water sedimentary stone where naturally water runs through it. Although sometimes people install this stone without filling those holes if they like that look; particularly on walls in dry areas.
How do you repair broken travertine tile?
Filling the cracks with a filler made for filling cracks or fissures may be the answer. The filler can be colored to virtually any color to match the stone and honed or polished to match the finish of the stone. Travertine tile & grout deep cleaning for floors, counters and showers.
What is the best sealer for travertine?
To seal travertine pavers, use a water repellent siloxane-based sealer like Masonry Saver Heavy Duty or SuperSeal M. This will help the pavers to resistant moisture and UV rays and keep them from weathering.
How to fill a hole in travertine?
Spread the filler into the hole in two directions avoiding any bubbles or voids. For larger holes in Travertine this may require several applications to build up the filler. Get as flush as possible but don’t worry if the filler is sitting on top of the tape as it can be trimmed off later.
What is a filled travertine floor?
The filled version is where larger indentations and holes are filled during production. The following article describes how to fill holes in Travertine and Limestone floors.
How long should epoxy resin be left on a floor?
If the floor is newly sealed it will be best to leave filling for a few weeks when the seal has cured and dried. Epoxy resin floor filler.
What color is travertine?
This resin comes as a straw colour which could match your floor. Travertine floors can come in may different shades. Below we used a colour tint yellow. However sometimes the best results can be achieved using a gray colour which I will come to at the bottom of the page.
How to protect tile from a hole?
Mask off the holes using masking tape. This will protect the surrounding tile.
Can you tint Tenax epoxy?
I have found that Dyegrout dye can tint Tenax epoxy resin very effectively in very small amounts. Dyegrout dyes are shipped worldwide and can be found on this link: Here
How long does it take for a tin to set?
If you measure the right amount it usually sets in 5 to 10 minutes so just use small amounts till you get used to it. Getting the right colour.
How to Use Travertine Filler Kits on Your Stone Floors
Perhaps you have some lovely-looking travertine floors in your home. The reality is that travertine comes with a wide assortment of voids and holes. Usually, the holes are filled at the factory prior to the travertine being delivered for consumer usage. However, some spots may be missed, or some of the filler may come out.
1 Use the Right Product
When you want to fill the voids and holes in your travertine flooring, use a travertine filler. This is a type of epoxy that is designed primarily in order to fill the holes that you notice that are present in your travertine flooring. This is the best way to fill those holes.
2 Prepare the Travertine Filler
You need to realize that you must prepare the travertine filler prior to using it to fill the voids and holes present in your travertine flooring. You should always follow the manufacturer's directions that are provided with the product that you choose to use. Then you can be sure that you will consistently achieve the best results.
3 Apply a Hardener
Consider the reality that you will likely have to mix a bit of hardener with the travertine filler. This is a normal additional step that is necessary for most travertine filler products. Follow the directions in regard to the type of hardener that you have selected to apply to the travertine filler.
4. Work at a Quick Pace
It is important to work quickly when you are using the travertine filler to fill the various voids and holes. This is due to the fact that the filler sets rapidly within a period of approximately seven to ten minutes since the time that you prepare the travertine filler.
5 Use a Putty Knife
When you need to place the filler on the travertine to fill those voids and holes, then a putty knife is a great tool to use for the application. It is wise to also place tape around the areas that you will fill. This will help you have less of a mess of extra filler that will need to be removed from the travertine.
6 Use Acetone for Cleaning Off Extra Filler
When you have completed filling all of the voids and holes with the travertine filler, you need to clean off the excess filler. You can do that by using acetone. It is imperative to remove the extra travertine filler prior to it being completely set.
What Is the Deal With Those Holes?
No matter what you call them those holes in your travertine are one of the things that make it the stone that it is. These "pits" or "pockmarks" that appear to one degree or another in travertine are related to how the stone is formed. If research and deep study are your thing, you can read in depth about how travertine forms in this geological article about travertine .
What is Tenax Travertine Filler?
Tenax Travertine Filler is easy to use and it is available in quantities that are jst right for the do-it-yourselfer looking to repair cracks, chips, or holes in travertine. it is versatile because it is available in two popular pre-packaged colors including. Filler for Brown Travertine. Buff Filler for Travertine.
How to make a filler with denatured alcohol?
Clean the area you are going to fill using denatured alcohol. If you have a coloring paste add it to the filler to get the color you want. Mix the catalyst with the glue at a ratio of 2-3:100 (2-3 parts of catalyst per 100 parts of glue) in weight. Stir the mixture vigorously until thoroughly combined.
How to remove trace filler from stone?
Cut excess filler off stone with razor blade and remove trace filler with acetone.
What are the holes in travertine?
No matter what you call them those holes in your travertine are one of the things that make it the stone that it is . These "pits" or "pockmarks" that appear to one degree or another in travertine are related to how the stone is formed.
Can you use travertine filler with transparent filler?
At the end of the video, you get to see the results of both methods. The transparent product used to file the holes with the clear filler is not available for retail sale. However, to get the results demonstrated by using the buff or brown travertine filler, follow this procedure:
Can you use travertine filler with a color?
If you have a travertine that has highlights of a different color, you can use the coloring paste to tint the buff or brown fillers to produce virtually any color of travertine filler. Even if your particular repair needs a color other than the ones listed above, you can purchase coloring paste to help you match other colors.
