how do you vacuum a pool cartridge filter

When you want to vacuum to waste with a cartridge filter, follow this step:

• Switch off the pump Locate the back of your filter and unscrew the drain plug
• Switch on your pool pump and let the water run until it gets to your desire level that you want to vacuum the water out of the pool
• Shut off the pump and screw the plug back into the drain plug

Full Answer

How to vacuum to waste with a cartridge filter?

When you want to vacuum to waste with a cartridge filter, follow this step: Switch off the pump Locate the back of your filter and unscrew the drain plug Switch on your pool pump and let the water run until it gets to your desire level that you want to vacuum the water out of the pool

How to use a pool vacuum to clean your pool?

Getting Started. 1 Step 1: Assemble your pool vacuum. This is quick and easy to do. Simply attach the vacuum head to your telescoping pole (remember, it should snap on ... 2 Step 2: Connect the vacuum hose. 3 Step 3: Choose your filter valve setting. 4 Step 4: Start vacuuming. 5 Step 5: Disconnect, change filter settings, and do a final cleanup.

How do I empty my pool filter?

Switch off the pump Locate the back of your filter and unscrew the drain plug Switch on your pool pump and let the water run until it gets to your desire level that you want to vacuum the water out of the pool Shut off the pump and screw the plug back into the drain plug

Where does the water go when I vacuum the pool?

While vacuuming the pool, the water does not go into the filter basin but is pulled out of the waste port and pumped out through the pipe or backwash hose. Follow the below simple step to vacuum your pool to waste:

How does a self propelled pool vacuum work?

What is a suction vacuum?

How to empty air from a vacuum?

How to remove debris from pool?

What happens if the water level is too low?

Where is the suction port on a pool skimmer?

Can you remove the basket and filter from a pool vacuum?

See 4 more

About this website

What is the best way to clean pool filter cartridges?

0:454:55How to Clean a Pool Filter Cartridge Leslie's - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's a few different ways to go about cleaning. It. There is a spray solution which you just goMoreThere's a few different ways to go about cleaning. It. There is a spray solution which you just go ahead and you spray it all down. Wait 10 minutes 15 minutes or so then you're going to hose it. Down.

What setting do I put my pool filter on to vacuum it?

To begin vacuuming your pool:If you have a sand filter and are vacuuming to waste, set filter to “waste” option. ... Otherwise, leave setting on “filter” and turn pump on to begin vacuuming. ... Vacuum your pool just as you would vacuum your living room, picking up debris or algae as you go.More items...•

How do you backwash a cartridge filter?

4:206:43How To BACKWASH A POOL FILTER (The Right Way) | Swim UniversityYouTubeStart of suggested clipEnd of suggested clipThree turn the filter. System back on and let it run for one to two minutes water should be flowingMoreThree turn the filter. System back on and let it run for one to two minutes water should be flowing out the backwash hose. Four turn the filter. System. Off then return the multi-port valve to rinse.

How do I operate pool filter vacuum?

1:296:01How To VACUUM A POOL (Above Ground and Inground) - YouTubeYouTubeStart of suggested clipEnd of suggested clipMake sure the pump and filter are running attach the vacuum head to the open end of the telescopicMoreMake sure the pump and filter are running attach the vacuum head to the open end of the telescopic pole attach one end of the hose to the vac.

Do you vacuum a pool on backwash or filter?

Yes, we recommend backwashing after you vacuum your pool. This allows the filter to shoot out any dirt / debris you have vacuumed up. Don't forget to set your filter to “rinse” for 30 seconds after backwashing!

Do you vacuum pool on waste or filter?

For routine vacuuming, the filter valve is left in the normal “Filter” position. This directs dirty vacuum water through the pool filter to remove the contaminants, then conveys filtered water through return lines back to the pool. The "Filter" setting is used for light to moderate levels of pool sediment.

Can a cartridge pool filter be backwashed?

Cartridge pool filters cannot be backwashed and must be cleaned by hand. Because they were not built for reverse water flow, cartridge filters can't be "backwashed" simply by reversing the water flow in the pool's filter system. These filters must be cleaned by hand when they are dirty.

Do I need to backwash a cartridge pool filter?

Both sand and DE filters need to be backwashed every once in a while. Cartridge filters don't need backwashing. And let's be clear -- a pool filter is not the same thing as a salt water system, should you have one. Some pump and filter systems include built-in saltwater components.

Do you have to backwash a cartridge filter pool?

Unlike other filtration systems, cartridge filters don't require backwashing, which means homeowners don't waste the water and extra energy involved in backwashing. The small size of cartridge filters allows them to be run on smaller pumps because they can run with a lower flow rate pump, which saves energy.

How do you manually vacuum a pool?

A Step-By-Step Guide to Installing and Cleaning Your Pool with a Manual Pool VacuumAttach Vacuum Head and Hose to the Telescopic Pole. ... Fill The Vacuum Hose with Water to Remove Air. ... Attach Vacuum Hose to Pool Skimmer. ... Start Vacuuming. ... Disconnect The Vacuum and Perform a Final Clean.

How do you get sediment out of bottom of pool without vacuum?

Use a rake to gather the debris pieces into a pile, and then remove the pile by hand. Bag it and dump it in a garbage. If the debris is floating and not in the bottom of the pool, you can opt for a leaf net to trap the debris along the water's surface.

Why doesn't my pool vacuum have suction?

Rule out the obvious causes of poor vacuum first. Make sure the water level in the pool is sufficient and air is not being sucked in through skimmer inlets. Add water to the pool to submerge the skimmers if necessary. Verify that the pump strainer basket and the skimmers are free of debris that may obstruct water flow.

What speed should my pool pump be on to vacuum?

The pump must be set at a speed that produces 17 to 25 psi at the water valve gauge(s) and cleans the pool.

How do I turn on my pool vacuum valve?

0:191:02How to Set Valves for Your Manual Pool Vacuum Or ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe setup is simple open your vacuum valve all the way. And cut both of your skimmers. Down to aboutMoreThe setup is simple open your vacuum valve all the way. And cut both of your skimmers. Down to about two o'clock. What that's doing its given all the suction to your vacuum.

How do you set up a pool vacuum?

1:102:17How to Connect a Pool Vacuum : Pool Tips & Care - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe end of the vacuum hose through the skimmer throat. And plug it into the suction port of theMoreThe end of the vacuum hose through the skimmer throat. And plug it into the suction port of the skimmer. And now you're ready to vacuum your pool.

What are the different settings on a pool filter?

The functions are as follows:Filter: Use for normal filtration or vacuuming the pool.Backwash: Is used to clean filter sand. ... Rinse: To clean water inside filter tank. ... Waste: Use for vacuuming heavy concentrations of dirt directly to waste. ... Closed: Use for shutting off the flow to the filter and pool.More items...•

How do I vacuum to waste using a Cartridge Filter?

I have a Hayward Xstream Cartridge Filter Model CC1000 with a separate pump. Is there a way I can vacuum to waste? I've been having a major algae problem due to neglect from the previous homeowners and everytime I vacuum, the filter spits this white residue back into the pool making the water extremely cloudy once again.

Vacuum To Waste With Cartridge Filter - The Pool Industry

Disclosure: This post may contain affiliate links. This means that at no cost to you, we may earn a small commission for qualifying purchases.When you are performing “Vacuum to Waste” in your swimming pool, the debris you scoop out of the pool is pumped directly out of the pool, and the water is pumped out […]

How To Vacuum To Waste With Cartridge Filter - Cleaning Beasts

Steps To Vacuum To Waste With Cartridge Filter. When using a cartridge filter in your swimming pool, the debris that you scoop out of the pool pumps directly out, and the water pumps out through the backwash line, not the pool filter.This method removes a lot of water from the pool in a short period, so make sure the pool is full before you proceed. . You need to vacuum the pool to waste with ...

What to do before vacuuming a pool?

Prior to vacuuming your pool, you need to make sure the water level in your pool reaches the level where you have your skimmer. The density of the water is a determinant of the performance of your vacuum cleaner. If the water density is low, it will reduce the pressure drawn by the device in sucking debris. Also, remember to clean your skimmer ...

Why is the wheel rotating so fast?

The greater the water flow, the faster the wheel rotates. Be careful not to over adjust or under-adjust the pump systems because it can result in poor performance or damage to your vacuum system. Once you are done cleaning, removing the vacuum system from the water and clean it for storage. Reader Interactions.

Do you need a vacuum for a pool?

One thing you need to keep in mind if you own a pool is its cleanliness. Be it above-ground or in-ground; there is a need to own a vacuum system that gives you a thorough cleaning process. Irrespective of different preferences in a vacuum system, it goes down to either having an automatic cleaning device or a manual device ...

Do pool pumps work with vacuums?

Your pool pump needs to be on while the vacuum cleaner is working. Regularly check the rotation speed of the wheels beneath the vacuum device. For the optimal performance unit, you can tweak the pump system. The greater the water flow, the faster the wheel rotates.

Where is the suction port on a pool skimmer?

Some suction ports are found a little bit underneath the pool, positioned near the middle of the pool.

How to prevent oversaturation in pool?

Prevent oversaturation by frequently moving the backwash hose. Vacuum the pool until all or a large portion of the debris is no longer present in your pool water. On the off chance that the pool isn’t clear after you do this, start the process all over again.

What is the purpose of vacuuming to waste?

Vacuuming to waste is an essential aspect of pool maintenance that removes debris from the pool dirt that can clog up the filter sooner than later, which requires the pool owner to clean the filter. While vacuuming the pool, the water does not go into the filter basin but is pulled out of the waste port and pumped out through the pipe or backwash hose. Follow the below simple step to vacuum your pool to waste:

How to vacuum a pool with a cartridge filter?

When you want to vacuum to waste with a cartridge filter, follow this step: Switch off the pump Locate the back of your filter and unscrew the drain plug. Switch on your pool pump and let the water run until it gets to your desire level that you want to vacuum the water out of the pool. Shut off the pump and screw the plug back into the drain plug.

What is the best way to vacuum a pool?

The pool waste line provides easy and the best pool vacuuming methods for every pool owner. A pool filter with a multiport valve will definitely have a 1 ½ built-in waste line feature as one of the valve modes. But a cartridge filter is likely not to have this notable feature which means you’ll spend much time vacuuming your pool with a garden hose.

How does a pool vacuum to waste work?

When you are performing “Vacuum to Waste” in your swimming pool, the debris you scoop out of the pool is pumped directly out of the pool, and the water is pumped out via the backwash line instead of the pool filter. Although this method removes a lot of water from the pool in a short period of time, ensure the pool is totally full before you proceed with your vacuum to waste activities. When you want to vacuum to waste with a cartridge filter, follow this step:

What is vacuum to waste?

Vacuum To Waste With Cartridge Filter. When you are performing “Vacuum to Waste” in your swimming pool, the debris you scoop out of the pool is pumped directly out of the pool, and the water is pumped out via the backwash line instead of the pool filter.

How to clear a pool that isn't clear?

Vacuum the pool until all or a large portion of the debris is no longer present in your pool water. On the off chance that the pool isn’t clear after you do this, start the process all over again.

Why do you need to vac your pool with cartridge filters?

Your pool strainer basket might remove that floating debris, and that means the bottom might have grime and grit. That is why you need to vac your facility with cartridge filters.

Where do pool filters run?

Such products run automatically at the bottom of your pool with cartridge filter systems that help to pick the little dirt .

What is the purpose of a pool vacuum hose?

The purpose is to have a long hose that can allow the vacuum to reach every corner of your pool.

What is the most efficient way to clean an above ground pool?

The suction models are the most efficient when cleaning above ground pools. They use multiple hoses that connect to your facility’s filtration pump to provide the cleaning power.

Where is the line for a pool skimmer?

For some pools, the line is found inside the pool skimmer canister on the deck. Here you will need to attach an elbow fitting to the suction line of the skimmer and then feed the hose via the flapper door.

Do you have to set up a vacuum when cleaning a pool?

Unless you own an auto pool cleaner, you will need to set up your vacuum cleaner manually when cleaning your pool.

Can you vacuum an above ground pool?

You can now vacuum your above ground pool with a cartridge filter without a hassle. Choose the unit that meets your needs and follow the above steps to ensure a clean pool.

Steps To Vacuum To Waste With Cartridge Filter

When using a cartridge filter in your swimming pool, the debris that you scoop out of the pool pumps directly out, and the water pumps out through the backwash line, not the pool filter. This method removes a lot of water from the pool in a short period, so make sure the pool is full before you proceed.

Why And When To Vacuum To Waste With Cartridge Filter

You should vacuum to waste if there is a lot of debris in the pool, especially silt, which clogs up the filter quickly, so you need to stop vacuuming and backwash or clean. The vacuum water never reaches the filter tank but is sprayed out of the waste port into the backwash hose or pipe.

What Is A Pool Vacuum Valve

A vacuum valve is an essential part of a swimming pool that controls the flow direction. Swimming pool vacuum valves can be controlled manually, electronically, or electromagnetically. There are various valve switches for controlling the flow and switching pressure, depending on the process.

What Is A Pool Waste Line

Every pool owner can utilize the pool waste line for easy and effective pool vacuuming. There is no doubt that one of the valve modes on a multiport pool filter will have a 1-1/2″ waste line built-in. The problem with cartridge filters is that they often lack this notable feature, which means you’ll spend much time vacuuming your pool.

Steps To Vacuum To Waste With Cartridge Filter

Vacuuming to waste is an essential part of pool maintenance. It is important to remove debris from the pool dirt before the filter can clog up. Forcing the owner to clean the filter sooner rather than later.

Filter To Waste – What Is It

Filter to waste merely refers to the volume of filtration created. Following the discharge of a filter or the construction, rebuilding, or upkeep of a filter. A filter to waste arrangement allows the water separated in the filtration cycle to be disposed of or made usable again after it washes back.

What To Do If There Is No Valve

Cartridge filters lack a backwash valve. Since you don’t backwash them, you would need to remove them and wash them with your garden hose. There is a way to vacuum waste with a cartridge filter.

How to attach a vacuum hose to a skimmer?

Attach one end of the hose to the vacuum head and attach the other end to your skimmer using the vacuum plate. (Remember to take the skimmer basket off first!).

What is the name of the hose that connects the pool pump to the skimmer?

Vacuum hose. The vacuum hose connects your vacuum head to your pool pump via the skimmer inlet, which provides debris-sucking power. Vacuum plate. This is also called a “skimmer plate,” but don’t let the names confuse you. Whatever you call it, this piece of equipment connects the hose to the skimmer inlet.

What to do when pool filter is dropping?

When using your pool filter’s “Waste” setting, you might notice your pool water level dropping. To keep your pool properly filled, use a garden hose to ensure a steady stream of fresh water and keep your water level even.

What is the best way to clean a vinyl pool liner?

A vinyl pool liner requires a vacuum equipped with a soft brush to prevent tears and damage. If you have a concrete or gunite swimming pool, choose a vacuum head that features wheels for easy movement.

How to clean a pool with a vacuum?

Move the vacuum like you would a real vacuum on a rug, in slow linear passes (going too fast will just stir up the dirt without sucking it up). If the pool is especially dirty, you may have to stop and empty the pump strainer before continuing. Repeat the process as many times as you need to remove all debris from the floor of your pool.

Can you disconnect a pool vacuum head?

Once your pool is vacuumed to your satisfaction, you can disconnect your vacuum head and hoses. Make sure to clear out the bottom of the skimmer, too. If you changed your filter pump settings, make sure to change them back (and if you’re using a sand or DE filter, now’s the time to do a quick backwash). For a finishing touch, attach a brush ...

Do pool vacuum heads work with telescopic poles?

If you’ve got a swimming pool, chances are good you’ve already got a telescopic pole, plus interchangeable attachments like nets, skimmers, and brushes. Most swimming pool vacuum heads are designed to work with any telescopic pole. Vacuum hose.

How does a self propelled pool vacuum work?

A self-propelled suction-type swimming pool vacuum is powered by a hose attached to the pool's filtration pumps.

What is a suction vacuum?

This latter type, usually known as a suction vacuum system, is by far more efficient at cleaning your pool. This type operates through a series of vacuum hoses that tap into your pool's filtration pump system, which actually provides the power to operate the vacuum unit. This has the advantage of allowing the vacuum to pump large quantities of water, thereby cleaning the surfaces of your pool much more rigorously and more quickly than cheaper handheld models. It also means no secondary source of power is needed, so there are no batteries or power cords necessary.

How to empty air from a vacuum?

Submerge the vacuum unit into the water and push the hose down into the water. This will empty all air from the hose. If there are air bubbles in the hose, the vacuum will not work effectively.

How to remove debris from pool?

The surface strainer on most pools will remove the largest floating debris, but the bottom of your pool collects grit and grim and small pieces of debris, and the only way to remove this is with a vacuum that runs along the bottom of the pool. There are many types of these pool vacuum cleaners available, ranging from small rechargeable units ...

What happens if the water level is too low?

If the water level is too low, it will affect the vacuum's suction ability. Also, clean out any debris from the pool's basket strainer. The basket should be clean before starting your vacuum-cleaning routine.

Where is the suction port on a pool skimmer?

For some pools, this will be a port near the middle of the pool, found just below the surface of the water. It is possible that some type of permanent adapter fitting may need to be installed on the port in order to make ...

Can you remove the basket and filter from a pool vacuum?

When vacuuming is done, the basket and filter can be easily removed and rinsed out to prepare the vacuum for the next use. While less expensive hand-operated suction systems are available, increasing numbers of pool owners are now opting for robotic systems that operate in much the same fashion as robotic floor vacuums for the home.