how do you ventilate an entertainment center

Method

1. Determine and mark where the fan will be placed Placement of the fan will vary depending on your needs. ...
2. Cut out a hole for your cooling fan It's time to bring out the power tools. First, grab your drill and insert a 1/2-inch drill bit. ...
3. Assemble fan and install

Full Answer

How do I Mount my fans to my entertainment center?

You should get a green light on top of the box when it has power. Mine is hiding behind my center channel because it allows it to be in the center of the cabinet so all the fans can plug in easily. Next, put the heat sensor in the hottest spot of your entertainment center. Now mount your fans or place them where you want them to be.

How to keep your home entertainment center cool?

Keeping your home stereo in a cabinet helps with noise and protects your equipment from pets and kids. Game consoles, receivers, and STBs don’t work well in saunas; so here’s how to keep your entertainment center cool automatically. Heat is one of the quickest ways you can kill electronics.

How do I add a heat sensor to my entertainment center?

Plug in your thermal controller and run power to it. You should get a green light on top of the box when it has power. Mine is hiding behind my center channel because it allows it to be in the center of the cabinet so all the fans can plug in easily. Next, put the heat sensor in the hottest spot of your entertainment center.

How can it help you organize your entertainment center?

It can help you organize your entertainment center by removing media that doesn’t need to be on there. If you’re like me and you have a growing vinyl record collection, you want somewhere to store and display your records. I am just using a wooden crate right now, but I came across this record holder on Amazon.

How do you vent a TV cabinet?

Perhaps the most effective way to keep your electronics cool is to select furniture with built-in ventilation. Give each component—be it a TV, speaker, AV receiver, or gaming console—about 2-3 inches each, and make sure all of the vents around each item are completely clear and do not obstruct airflow.

How do you vent an electric cabinet?

In an ideal set up, there should be a fan located near the top of the cabinet configured to exhaust out air, and a fan located near the bottom to push in air. Electronics such as receivers and computers within a cabinet will cause air to heat up.

How do you install Entertainment Center fans?

3:405:37Always On - How to install a cooling fan - YouTubeYouTubeStart of suggested clipEnd of suggested clipMuch better now we can get to installing the fan all right the first thing we need to do is secureMoreMuch better now we can get to installing the fan all right the first thing we need to do is secure the fan to this mounting.

Do cabinet fans work?

A cooling fan works on the principle of forced convection, by enhancing natural convection—heat rising and escaping through vents at the top of the cabinet—with fans or blowers. As outside air is pushed through the system, it carries the heat generated inside the enclosure through an exhaust vent.

How do you cool an electric enclosure?

When convection isn't enough to cool the enclosure or factors like humidity are an issue, try closed-loop cooling. Heat exchangers cool air effectively in colder environments where humidity impacts the design, whereas air conditioners work best for electrical enclosures in hot environments.

How do I keep my Cabinet cold?

You can increase ventilation even more by installing fans to actively circulate air through cabinets. The most common cabinet fans are top-mounted fan panels that pull air from the bottom of the cabinet or through the doors. For spot cooling, use a fan or fan panel that mounts inside the cabinet.

How do I keep my stereo receiver cool?

2:085:41HOW TO Keep Your Home Theater Equipment COOL! | AC Infinity S7-P ...YouTubeStart of suggested clipEnd of suggested clipBut they work well to help keep the fans from moving around. And if for some reason you decide thatMoreBut they work well to help keep the fans from moving around. And if for some reason you decide that two fans aren't enough you can daisy chain up to six fans together on the same power adapter.

Should I have more intake or exhaust fans?

Generally, you want the case fans in front of the case drawing in air while the fans at the rear blow air out. If your case has vents at the top, they should be placed as exhaust fans because hot air will rise. Side-mounted fans should be used for intake, though they often don't have air filters.

Is only one exhaust fan enough?

There's no set amount. Optimal numbers for airflow in an ATX mid tower is 2x intakes, 2x exhaust. That's running the fans at a nominal rpm. If you make it 3x intakes, you'll get the exact same amount of airflow as with 2x intakes, but the fan rpm will be lower.

Do adding case fans make a difference?

But what about adding more? Adding an additional pair of intake and exhaust (for a total of four fans) will likely lower your temperatures anywhere from two to five degrees. That can be significant but anything beyond that and you are likely to see a diminished return in the range of one to two degrees, if that much.

How do you vent a kitchen cabinet?

0:002:21Range Hood Vent And Outlet - Kitchen Cabinet Tips - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd all you need to do is build a box around it as you can see here I just used some scrap from theMoreAnd all you need to do is build a box around it as you can see here I just used some scrap from the shelving materials that we used and built a little box around it.

Do electric ovens need ventilation?

The truth is that you should consider a vent for your electric stove. Even if you cook one or two times a week, a vent hood can be beneficial for you. It will clean your indoor air and improve your indoor air quality. For electric stoves, we recommend a range hood of at least 600 CFM.

How do you run a heat duct under a cabinet?

0:387:24Installing A Toe Kick Ducting Kit - Toe Ductor - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe heat register from the wall out through that space underneath in no-man's land. And then out theMoreThe heat register from the wall out through that space underneath in no-man's land. And then out the front end so I just have to hook this up quick before. I can get that cabinet back in place.

Can you put a cabinet over a vent?

You might think it's necessary to have some sort of flex tube or extender to direct the air to the vent but you really don't. The air is going to take the path of least resistance…it's going to flow through the air vent. So now you can install your window seat, cabinet or built-in and get on with life!

Step 2: Electrical Setup

Electrical setup was fairly straightforward. I plugged the breakout board into the Xpress board, then plugged both clicks into the breakout board. I soldered wires onto a four pin male header to connect to the fan, and then put those wires (except for the one for power) into the screw terminals on the fan board.

Step 3: The Code

I made use of the click module support for Microchip Code Configurator, available here, to handle most of the heavy lifting for device setup. The, code, available here, reads the temperature, and then sets the motor speed proportional to the temperature. At 90F or below, the fan goes at minimum speed, ramping up to full speed at around 100F.

Step 4: Installing the Fan

I drew a circle the correct size on the wood, and used a Dremel cutting tool to cut out the circle. The quality of the cut isn't great, and if I did it again I would use a drill circle cutter, but the fan will be hidden behind the audio system, so it's not a huge deal.

Step 5: Final Thoughts

The temperature inside the entertainment center is now at a reasonable level, and the sound produced by the fan is barely noticeable. If I ever add any more equipment into the case, the system will automatically compensate for the additional heat, meaning I should never need to update the code on the system.

Why is ventilation important in recording studios?

Indeed, fresh air can help keep the moisture and humidity in the place at a safe level. It also allows anybody in the studio to enjoy playing there for hours at a time. As we are about to see, there are several reasons why you should not forego the installation of a high-quality ventilation system in your recording studio.

What is the best way to replace a studio vent?

Investing in soundproof vents is the best way to substitute the vents you have and aim for optimal results. Soundproof vents are a premium alternative that allows you to keep your studio as it is, and the ventilation system will only need minimal alteration.

What is a passive vent?

Ventilation systems are often complete with a passive vent that will extract the stale air from the room, while a van connected to a duct will propel air in. However, these systems can cause several noises and interruptions.

What are the factors to consider when designing a recording studio?

When you are designing your recording studio, there are several aspects that you might have taken into consideration. Undoubtedly, convenience, affordability, and availability are among the most important factors you considered.

Does an HVAC system improve ventilation?

Before considering this solution, it is worth understanding that an HVAC system is not always a suitable option to improve the ventilation or air circulation in a room. Indeed, in most cases, air conditioning systems are designed to influence the room temperature without necessarily allowing for fresh air to come through.

Can you soundproof an existing vent?

Soundproofing an existing vent might be a viable solution if you have converted an existing room into a recording studio. Indeed, most rooms in modern houses need to be connected with the building’s ventilation system. This particular is crucial to ensure that fresh air flows through each room.

What is an entertainment center?

Entertainment centers are basically elaborate shelves that not only store things but display things. A lot of people place pictures, figurines, crafts, or small artworks to display in the open cabinets of entertainment centers. It’s not unreasonable to want a place to display family photos or nice looking art pieces.

Why are there two way horizontal centers with small woofers?

The problem with two-way horizontal centers with small woofers is that those speakers likely have a higher crossover frequency to the tweeter which gives the woofers a wider frequency range in which to create destructive off-axis lobing. Entertainment centers can often force users to use a weak center speaker.

What components put out heat?

Pre-amps, power conditioners, and source components such as HTPCs all put out heat as well. These electronics are all designed to disperse heat away from the units themselves as heat is one of the leading, if not the leading, cause of premature electronics failure.

Why is the center speaker important?

This is a big problem because the center speaker is the most important speaker in a surround sound system. It is where most dialogue in sound mixes come through. It is the most heavily-used speaker in modern sound mixes and thus the speaker subject to the greatest dynamic range in content.

Is a two way center speaker good?

While a two-way center speaker turned on it's side (Ie. MTM) can make for a fine center-speaker design, it could never make for a great one due to problems inherent in the design. To be blunt, the best center speakers are three-way designs.

Can entertainment centers use a weak center speaker?

Entertainment centers can often force users to use a weak center speaker. One more point worth mentioning here is that a lot of entertainment centers don’t have any dedicated shelf at all for center speakers since the shelving arrangement divides the entertainment center in half.

How does air enter a cabinet?

A lot of air can enter a cabinet through a small gap in a door and even greater amounts through wiring holes and other openings.

Why should you pay attention to ambient temperature in a cabinet?

You should also pay attention to ambient temperatures in a cabinet because the problem occurs because several components that generate heat or put in one area and then airflow limited or cut off totally. The point is to not let this scare tactic work on you! Again, use common sense and take the basic precautions.

Why is it so difficult to install equipment in a cabinet?

It is complicated because of the variances in heat output, in the open air space within the cabinet and how freely air can move within the cabinet.

What is cabinet cooling?

Cabinet cooling products help protect systems installed in cabinets and entertainment centers by dispersing the accumulation of heat generated by the systems as a whole. These products in particular have been designed for venting and cooling cabinetry, lecterns, and general enclosures and allow for flexibility in how systems are installed and used in cabinets in regard to the naturally occurring heat from components. If you have been having to leave your cabinet doors open because of heat, these are the products to solve your overheating issues!

Need help with heat ventilation in TV component closet

As part of our home renovation, we had our TV components moved into a closet. It never really bothered me to have all those wires and cables cluttering up the family room - at least I knew where everything was connected.

Comments (43)

receivers and game consoles produce a ton of heat and I would have never put that stuff in an enclosed closet. The doors need to be kept open during use. Dont stack anything on top of the receiver!

Step 1: Take everything off the entertainment center and Declutter

Remove everything from the stand, and look at everything you’ve removed.

Step 2: Dust and Clean everything

Now that you’ve removed everything, it is a great time to dust and clean everything.

Why is it Important to Keep a Clean Entertainment Center?

For most people, the entertainment center is the main focal point of their living room. It helps to keep all your devices in one place so it looks nice and can be kept safe. However, this comes with a huge issue of maintenance.

What Equipment is in Your DIY Entertainment Center?

An entertainment center is designed to safely house a variety of different types of equipment, each of which will have different specific requirements. Thinking about what devices you will include in yours helps you to plan out what design you want, and how to ensure it meets your needs:

Positioning Your Equipment

When placing equipment in your entertainment center, you want to make sure you put each item in the ideal location. Many people make the mistake of stacking multiple devices on top of each other, but that can cause some problems. First, all the cables will be in the same area, which is an issue.

Is a Wall Mounted Entertainment Center Right for You?

Wall-mounting your entertainment center, or at least a portion of it, is an extremely popular and effective option. It helps to free up additional floor space in the room. Most importantly, it makes it much easier to organize and maintain a clean entertainment center.

Entertainment Center Cable Management

Organizing all your cables is critical and should be a priority right from the beginning. In addition to just looking messy, unorganized cables can cause a lot of problems today and in the future.

How to Hide Entertainment Center Wires

One of the biggest reasons people love entertainment centers is because it allows you to safely house all your equipment in a way that still looks great. Some people find that leaving cables in the open takes away from its appeal. Hiding your cables is a great strategy as an alternative, and it isn’t nearly as difficult as many people would assume.

Proper Cleaning

While all of the above-mentioned strategies are critical for a clean entertainment center, they don’t completely replace the actual cleaning of the area. No matter how you set up this living room staple, you will need to be able to remove dust and other debris that can contaminate the area.