The weaving process involves a cotton warp with individual strands of grass inserted by hand. This is the traditional style of weaving the mat, done on a simple frame. A flat piece of wood is used to pack it in place. The grass is dampened to make it supple before inserting it in the weft.
Full Answer
How do you weave a lawn mower?
Weave a vertical pattern, with a new blade of grass, under and over the horizontal pieces. Weave the second row, with a new blade of grass, over and under the horizontal pieces. Keep the weaving tight up against the previous row for a strong weave. Handle with care- the weave will loosen up.
How to weave a basket out of grass?
Grass basket weaving is so simple, you will get nice results no matter what. Dare to be creative! Collect an armful of grass. You can use it as is or simply let it dry for a while. The longer the blades, the better. It works with shorter blades of grass too, but it might take a little longer. Start with a small bundle of long grass blades.
How do you cut the grass with a mower blade?
When the sides are as high as you require it to be cut the grass a bit shorter and fold the alternating blades over the top grass weave to catch the blade and weave the blade down the outside of the basket Now do the same folding the fold the leftover blades over to the inside of the basket to catch those weave blades and weave it in the inside.
How do you make a simple lawn mower cover?
Start with a small bundle of long grass blades. The bundle should be about as thick as your finger. Tie it together with the yarn on one end. Wrap the yarn around the end a few fingers width. Start to coil the grass like a snail. It can be a bit stubborn in the beginning. Maybe it helps if you loosen (or tighten) the yarn a little bit more.
How do you weave a lawn mat?
3:2113:23How to Make a Grass Mat - YouTubeYouTubeStart of suggested clipEnd of suggested clipHow this works is we go down we slide in a bundle. We go up slide in a bundle. Press them tight andMoreHow this works is we go down we slide in a bundle. We go up slide in a bundle. Press them tight and when we come down again we're going to cross over and go over the sticks this way.
What method is used to make reed mats?
They are made from buri palm leaves, pandan leaves, rattan, or various kinds of native reeds known by local names like tikog, sesed (Fimbristykis miliacea), rono, or bamban. In Thailand and Cambodia, the mats are produced by plaiting reeds, strips of palm leaf, or some other easily available local plant.
How do you weave a flax mat?
How to weave a flax matPlace 5 strips of Flax on the table, equally spaced as per the image below.Trim unnecessary edges.Turn your flax mat over. ... Weave four more strips of flax through as per step two. ... Once you have completed weaving 5 x 5, tighten as necessary.More items...
How do you glue grass mats?
2:354:58GRASS MATS part 1 HOW TO MOUNT - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut a little bit of contact cement in here spread it down real good the double sticky is a goodMorePut a little bit of contact cement in here spread it down real good the double sticky is a good temporary way to hold this down.
What material is used for making mat?
The three most commonly used materials for producing floor mats are vinyl, rubber, and carpet fiber. Depending on the intended use of your matting products, you can choose from any of these matting materials.
What is mat weaving?
Mat weaving has been one of the most ancient hand-woven arts of human beings, which were supplied by weaving herbal fibres into each other. The artistic taste of the weaver and utilisation of different pigments adds to the variety of these plain products.
How do you weave a flax basket?
6:248:50Flax weaving a basket (Kono) - YouTubeYouTubeStart of suggested clipEnd of suggested clipPull it a little bit tight. And then fold it back squish that top and again fold it and put it underMorePull it a little bit tight. And then fold it back squish that top and again fold it and put it under one piece. And we keep going all the way around till all the pieces on the left are. Done.
How do you lock off flax weaving?
After it is desired height and there is a tail of at least 100mm remaining on the strips then lock off the side weave. This is done by folding down every other strip behind the subsequent one to sort of lock it in place and optionally back weaving.
How did Māori make rope?
How Māori used flax. If you take a sharp shell and scrape it along a flax leaf, you will remove the green flesh and be left with strong, white fibres called muka. Māori spun muka into thread and used it to weave warm clothes and make ropes, fishing nets and many other things.
How do you lay model railway grass?
3:2113:01Adding Grass and Bushes - Building a Beginners Model Railroad from ...YouTubeStart of suggested clipEnd of suggested clipOnce your grass mix is ready you pour it into the applicator. Like this and close the sieve applyMoreOnce your grass mix is ready you pour it into the applicator. Like this and close the sieve apply grass glue into the areas where you want your grass.
Can you put rubber mats on grass?
Rubber Grass Mats are the ideal solution to ensure grass can withstand heavy pedestrian traffic whilst it continues to grow. They are laid throughout the grass growing season to allow the grass to intertwine and bond with the mats in preparation for the wetter months of autumn and winter.
How do you make a bamboo mat?
Take nine strips and lay them out vertically. ... Weave additional strips of bamboo into the vertical strips horizontally. ... Weave more vertical strips into the mat to expand it, if necessary. ... Set the torch to a low, hot flame and run it quickly over the mat several times, covering the complete area.More items...
How do you make paper reeds?
The process to make the reeds is simple. Cut the magazine page in half vertically. Then take your wooden skewer and starting from the bottom corner at a slight angle, roll the paper to the opposite corner. About half way, you may need to adjust your skewer so that you don't roll off one end of it.
What can you make from reeds?
Words that can be made with reedsdeers.drees.redes.reeds.seder.sered.
What can be made using reeds?
Dried reed stems have been used for millennia as thatching and construction material, in basketry, for arrows and pens, and in musical instruments (see reed instruments). They also are harvested for their cellulose content.
Where to sew ends of grass bundle?from colorful-crafts.com
Once your bundle starts to get very thin, you can sew up the ends slightly on the inside of your grass basket.
How to make a grass basket?from colorful-crafts.com
Work your way around the coil. Add new blades if your bundle gets too thin. Make extra stitches if the gaps get too wide. Continue with the coil until the base has the diameter of the basket you want to make. Take a look at your grass coil from both sides. Usually the stitches on the topside form a nice, neat pattern.
How does a grass basket get its stability?from colorful-crafts.com
This is how the grass basket will get its stability. The new yarn always passes through the grass and underneath the yarn. If the gaps between the stitches get too wide, just make an additional stitch. Your bundle of grass should have the same thickness all throughout the basket.
How to make a sandbox out of grass?from colorful-crafts.com
Start with a small bundle of long grass blades. The bundle should be about as thick as your finger. Tie it together with the yarn on one end. Wrap the yarn around the end a few fingers width. Start to coil the grass like a snail. It can be a bit stubborn in the beginning.
How to keep grass from getting too thin?from colorful-crafts.com
Your bundle of grass should have the same thickness all throughout the basket. If it gets too thin, add a few new blades. It works best, if you hide the new blades in between the old ones. So the ends will stay hidden. Work your way around the coil. Add new blades if your bundle gets too thin.
Can you start sewing rounds together?from colorful-crafts.com
Now you can start with the sides. For this you simply stop sewing the rounds next to each other, but start sewing them on top of each other. In the first round you can stitch them together a little off-center for a softer transition.
Can you use straw to make a basket?from colorful-crafts.com
Try to use different materials. Straw works really well. You can get amazing results with raffia ( buy here* ), rushes or other plant fibers. Even wood wool can be worked into a rustic basket.
Where to sew ends of grass bundle?
Once your bundle starts to get very thin, you can sew up the ends slightly on the inside of your grass basket.
How to make a grass basket?
Work your way around the coil. Add new blades if your bundle gets too thin. Make extra stitches if the gaps get too wide. Continue with the coil until the base has the diameter of the basket you want to make. Take a look at your grass coil from both sides. Usually the stitches on the topside form a nice, neat pattern.
How to make a sandbox out of grass?
Start with a small bundle of long grass blades. The bundle should be about as thick as your finger. Tie it together with the yarn on one end. Wrap the yarn around the end a few fingers width. Start to coil the grass like a snail. It can be a bit stubborn in the beginning.
How does a grass basket get its stability?
This is how the grass basket will get its stability. The new yarn always passes through the grass and underneath the yarn. If the gaps between the stitches get too wide, just make an additional stitch. Your bundle of grass should have the same thickness all throughout the basket.
How to keep grass from getting too thin?
Your bundle of grass should have the same thickness all throughout the basket. If it gets too thin, add a few new blades. It works best, if you hide the new blades in between the old ones. So the ends will stay hidden. Work your way around the coil. Add new blades if your bundle gets too thin.
Can you start sewing rounds together?
Now you can start with the sides. For this you simply stop sewing the rounds next to each other, but start sewing them on top of each other. In the first round you can stitch them together a little off-center for a softer transition.
Can you use straw to make a basket?
Try to use different materials. Straw works really well. You can get amazing results with raffia ( buy here* ), rushes or other plant fibers. Even wood wool can be worked into a rustic basket.
How to weave a strand of yarn?
Take a strand from the horizontal pieces and weave. When this blade reaches its last full length of the weave, bend it over at the end, catching the end horizontal blade, and weave over the next horizontal blade and tuck it under the next horizontal piece. Cut any extra length. Bend the next blade from the other side (the opposite side of the previous weaving blade) and continue the weave.
How to weave a closed end?
To create a closed ended weave: Take the end piece from the horizontal blades and weave it over and under across the horizontal blades. When you reach the other side, bend the blade over and weave it back the other way. Add new sections of foliage or grass as needed, by overlapping the end pieces and continue weaving.
How to weave a sprite?
Place a few blades of grass in a parallel horizontal position. Weave a vertical pattern, with a new blade of grass, under and over the horizontal pieces. Weave the second row, with a new blade of grass, over and under the horizontal pieces. Keep the weaving tight up against the previous row for a strong weave.
What does "weaving" mean?
To weave is to interlace bands or strands or strips of material at right angles to build up a patterned mat, surface or sculptural form
How to add new sections of foliage or grass as needed?
Add new sections of foliage or grass as needed, by overlapping the end pieces and continue weaving.
How to soften leaves?
For weaving: Hold the dull underside of the leaves against the back of your knife blade and pull through. Turn the leaf over and do the other side.
Can you cut flax plant when harvesting?
A Special note about weaving with Flax: Harvesting and preparation: Do not cut the central shoot form the flax plant when harvesting. This weakens the plant. Do not cut in rain or at night- the foliage will be hard to work with because of the added moisture.
Why do weavers double back?
The strands are doubled back to develop a thicker mat and more complex locking mechanism so the weave doesn’t spread. At each step the weaver needs to take care not to break the strand of dried leaf. The mat is flipped over and back each time so the leaf is locked into place.
Where are Fijian mats made?
One well-known Fijian mat is the kuta, made by women in Vanua Levu, particularly Bua.
What is the Fijian mat?
The Fijian Woven Mat. One of the most commonly used items in Fijian traditional culture is the “grass mat.”. It is woven by hand from pandanus leaves. The long process of preparation includes scraping and boiling the leaves, and drying them in the sun. There are different mats used for different occasions, and some are made as gifts ...
Why are utilitarian mats so simple?
The patterns for utilitarian mats such as walls or floors are relatively simple because the mats are so large. But on smaller items the patterns are detailed and very artistic.The leaves are gathered and the spiny edges are stripped from the leaves which are then dried.
Is it good to put mats in the sun?
Putting mats in the sun is good whether it’s curling or not.
How to weave a diagonal green grass basket?
Once you figure out how to do the corners weaving a diagonal shape is actually not that hard to do. Start weaving long blades of grass in the basic weaving pattern. Continue weaving. This large flat weave will form the base of the grass basket. Turn the weave to form a diamond shape.
How many strands of grass do I weave for a basket handle?
To weave the decorative edge and the basket handle I wove 5 strands of grass into a long band.
How to weave a basket with a corner blade?
Fold the corner blade over to create an edge and continue the weaving pattern. Fold the next blade over and weave it down the opposite side. Weave each blade all the way down the basket. Continue the weaving pattern to create the sides. As you weave pull the blades of grass tight to create a strong basket.
How to weave a diamond pattern?
Turn the weave to form a diamond shape. This will give you a diagonal weave pattern. Fold the four sides flat to create the bottom edge s. The grass should just snap but not brake. Creating a neat corner is always the hardest. Fold the corner blade over to create an edge and continue the weaving pattern. Fold the next blade over and weave it down ...
