If you plan to remove and store your Hayward pump indoors for the winter, turn off the power at the breaker to the pool pump and equipment. Disconnect the wiring and the plumbing system from the pump and disconnect the pump from the mounting pad. Store the pump in a dry location.
How do I winterize my heat pump?
Depending on your heat pump model and when it was manufactured, there are different methods for winterizing. In the event that your heater will not be used for an extended period, it is recommended that pool water be allowed to circulate through the heater during normally scheduled filtration cycles.
Should I winterize my Hayward pool pump?
If your pool pump is full of water and the temperature drops below freezing, the freezing water will expand causing damage to your pump and other equipment. Taking the extra time to properly winterize your Hayward pool pump can save you money and headaches come next spring.
How do you unclog a pool heat pump?
Repeat process on outlet side. Place an air hose into the pool inlet of the heat pump; wrap a clean rag around the hose to form a temporary seal. Push all water from the water circuit using compressed air at approximately 50 psig. The residual water should be forced out of the pool out connection.
Can I Move my Pool heat pump for the winter?
It is unnecessary that your pool heat pump be moved from its installed location for the winter, and in fact, it is recommended that you leave it in place to avoid damaging the unit. Pool heat pumps do not need a lot of maintenance during winter months.
Where are drain plugs on Hayward strainer?
How to blow water out of pool filter?
Why do you not cover a pool pump?
About this website
How do you winterize a Hayward pool heat pump?
Steps to winterize your Pool Heat PumpTurn off all electrical power to the heat pump.Turn off the circulation pump.Disconnect the water piping.Remove the drain plug and make sure condenser drains out.Flush the heat pump with water by hooking up a garden hose into the water inlet line.More items...•
How do I winterize my Hayward pool heater?
0:551:52How to Winterize Your Pool Heater - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then you're looking for a drain plug right here this is the drain plug you're going toMoreAnd then you're looking for a drain plug right here this is the drain plug you're going to completely remove this drain plug and it's going to drain the stuff out of the heater.
Should I cover my pool heat pump in the winter?
It is always good to consult with your pool filter installation company or a professional for instructions on removing the filter to make sure it is done right. Manufacturers do not advise their customers to cover their pool heaters.
Do you need to winterize a heat pump?
Failure to winterize your heat pump may result in serious freeze damage not covered under warranty. Because of this, in areas where freezing conditions are prevalent and sustained, winterizing your heat pump is a must!
How do I prepare my pool pump for winter?
0:131:05Winterize Your Pool Pump - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo for the winter time. What you'll want to do is disconnect disconnect this the Union on the valveMoreSo for the winter time. What you'll want to do is disconnect disconnect this the Union on the valve here and that'll allow you to put a vacuum in here to blow out your pool lines.
How do I protect my pool pump in the winter?
How to protect your pool equipment in freezing weatherKEEP THE WATER MOVING. ... Make sure that all your pumps are freeze protected. ... Make sure your lines are all flowing. ... KEEP THE WATER LEVEL UP IN YOUR POOL. ... KEEP YOUR POOL MAINTENANCE UP TO DATE. ... IF THE POWER GOES OUT, WINTERIZE YOUR SWIMMING POOL EQUIPMENT.More items...•
How do I winterize my pool heater?
Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser.Step 1: Turn the gas valves off. ... Step 2: Open the pressure switch. ... Step 3: Open the winterization ports / drain cocks. ... Step 4: Drain the heater of all standing water. ... Step 5: Move heater indoors if possible.More items...•
At what temperature does a pool heat pump stop working?
Most heat pumps shut down when the outside temperatures go down below 55° degrees, some can continue to operate down to the mid to low 40's, and some can operate in temperatures of mid to low 20's.
How cold is too cold for pool heater?
Most pool heaters don't work as efficiently in temperatures below 50 degrees Fahrenheit (F).
How do you drain a Hayward heat pump?
How do I drain / winterize the heat pump? Turn off the power supply. Disconnect the unions on the water inlet and discharge lines. Tilt the heat pump slightly toward the fittings to insure all the water in the heat exchanger has drained out.
How do I protect my heat pump from freezing rain?
Protect your heat pump and air conditioner from snow and ice damageMake sure the defrost cycle works on your heat pump.NEVER cover your heat pump!Cover your air conditioner condenser during the off-season.Create a wind barrier around the unit.Regularly shovel away snow.Inspect your gutters for ice buildup.
Should I turn off my heat pump during an ice storm?
Freezing rain will cause the top of the unit to freeze over and in some cases the blade itself will be unable to turn. Solution: TURN THE UNIT OFF and use the emergency heat setting at the thermostat to turn the back-up heat on to keep the home comfortable. A garden hose can be used to melt the ice build-up.
How do you close a gas pool heater for the winter?
0:007:11How To Winterize A Pool 6 - Gas Pool Heaters - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's a gas valve. Close that next open these the heater. Itself and right in the front there willMoreThere's a gas valve. Close that next open these the heater. Itself and right in the front there will be also a gas valve in there that you turn and close.
How do I winterize my electric pool heater?
0:191:44How to Winterize Your Pool Heat Pump - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo for winterizing the Pentair and hayward de virtually the same you want to disconnect the pipes ofMoreSo for winterizing the Pentair and hayward de virtually the same you want to disconnect the pipes of the unions. And drain the water out so it'll be one going in and one going out this is the inlet on
How do I winterize my above ground pool heater?
Try watching this video on www.youtube.com, or enable JavaScript if it is disabled in your browser.Step 1: Turn the gas valves off. ... Step 2: Open the pressure switch. ... Step 3: Open the winterization ports / drain cocks. ... Step 4: Drain the heater of all standing water. ... Step 5: Move heater indoors if possible.More items...•
winterizing with a sand filter | Trouble Free Pool
I tried to do a search but it said the words sand and filter were too common. I've read a couple dozen threads but don't see the answers. We have a hayward sand filter that holds about 250 lbs of sand.
Winterize Hayward Heater | Trouble Free Pool
First year closing pool myself. Blew out lines with shop vac attached to a skimmer through system with all drain plugs still in the filter, pump basket and heater. 1. After capping the return lines, tried to blow air into main drain with shop vac but no bubbles but closed off valve anyway. I...
Winterizing Your Pool - Hayward POOLSIDE Blog
Winterizing Your Pool. The weather outside is starting to cool down, the leaves are changing color, and the number of days you have left to use your pool this season are dwindling.
How to winterize the Hayward sand filter - Blog | Poseidon
How to winterize a Hayward sand filter during the pool closing. Here is how to winterize a Hayward sand filter during the pool closing by the manufacturer recommandations :
Ten Steps to Closing your Pool the Right Way - POOLSIDE Blog
Ten Steps to Closing your Pool the Right Way. Closing your pool for the season may make you a little melancholy – it’s a sad but important process so here are 10 steps to make sure it’s done properly.
How to seal a heat pump?
Place a garden hose into the inlet side of the heat pump; wrap a clean rag around the hose to form a temporary seal. Allow water to run through the heat exchanger for 2-3 minutes; fresh water should be seen exiting the heater out-port. Repeat process on outlet side.
How to get water out of pool with heat pump?
Place an air hose into the pool inlet of the heat pump; wrap a clean rag around the hose to form a temporary seal. Push all water from the water circuit using compressed air at approximately 50 psig. The residual water should be forced out of the pool out connection.
How long does water filtration last in a freeze?
In areas where freezing conditions are a rare and brief occurrence, the water filtration system must be permitted to run continuously throughout the freeze period. Typically, during light freeze conditions (outside temperatures remain at, or just below 32°F for four (4) hours or less), circulating (moving) water will not solidify. ...
How long does a pool heater freeze?
Light Freeze Conditions Air temperature does not remain below 32°F for more than 4 hours. In the event that your heater will not be used for an extended period, it is recommended that pool water be allowed to circulate through the heater during normally scheduled filtration cycles.
How long should compressed air be in a pool?
Allow compressed air to blow into the heat pump inlet for at least 15-20 seconds after water stops coming out of the pool outlet.
Can water be frozen in a heat pump?
In areas where freezing conditions are prevalent and sustained, in advance of any freeze event, all water MUST be removed from the entire heat pump water circuit. Water expands when it freezes. Permitting water to freeze within a heat pump will severely damage the heat pump condenser and associated water circuit.
Can a heat pump freeze water?
Permitting water to freeze within a heat pump will severely damage the heat pump condenser and associated water circuit. Damage resulting from a failure to properly winterize is NOT covered under the heat pump product warranty. Depending on your heat pump model and when it was manufactured, there are different methods for winterizing.
How to get water out of a heat pump?
Disconnect the water piping. Remove the drain plug and make sure condenser drains out. Flush the heat pump with water by hooking up a garden hose into the water inlet line. Let it run for 2 to 3 minutes. You should see water exit the heat pump through the water outlet line.
What is a winter cover for a pool heater?
Winter covers protect your pool heat pump from snow, ice, rain, leaves, sand, pine needles, dust and other harsh elements.
Why do heat pumps have to be blown out?
The heat pump must be blown out with air to ensure no water is left inside. Most manufacturers recommend that a compressed airline be placed into the water inlet line to blow air through the unit.
Why do you have to remove water from a pool heater?
During non-season and winter months, it is important to remove water from your pool heater, PVC pipes, pump and filter to avoid damage from ice. Water expands when it freezes and may lead to leaks or pipes burs ting if you leave water in equipment during winter months.
Can a pool heat pump be moved in the winter?
Pool heat pumps can withstand the coldest of winter weather with no problems. The only precaution necessary, is to make sure that the heat exchanger is drained of all pool water. It is unnecessary that your pool heat pump be moved from its installed location for the winter, and in fact, it is recommended that you leave it in place ...
Do pool heat pumps need maintenance?
Pool heat pumps do not need a lot of maintenance during winter months. Keep it free of debris; such as leaves or pine needles and occasionally ensure there are no rodents nesting inside or chewing on wires. If you do not plan on using your heater more than once a week, turn it off. This will save you money!
Where are drain plugs on Hayward strainer?
Remove the strainer cover lid and remove the drain plugs located on the bottom of the strainer body. Depending on your model of Hayward pump, there may be two plugs to remove.
How to blow water out of pool filter?
Blow water out of each line from the filter to the return outlets and from the pump to the skimmers.
Why do you not cover a pool pump?
Do not cover the pump with plastic to avoid condensation or corrosion damage. Winterizing your swimming pool helps to protect the equipment from damage during the cold winter months. If your pool pump is full of water and the temperature drops below freezing, the freezing water will expand causing damage to your pump and other equipment.
