The gas company turns on the gas by placing an adjustable pipe wrench onto the tang and moving it from its horizontal (closed) position a quarter turn (usually either direction), so that the tang is now vertical. Turning off the gas is as easy as turning the tang with the wrench back to the horizontal position.
How do you turn off the gas on a gas shut off?
The shutoff valve has a rectangular (or flat-sided) tab that is about 1/2 inch thick; this is what you turn to shut off the gas. When the tab is parallel to the gas pipe, the valve is open and the gas is on.
Why would you turn off the gas in a house?
Reasons for Shutting Off the Gas The main shutoff valve controlling your home's natural gas supply may come into play during major construction or renovation involving gas lines or when closing up or shuttering a home, to prevent possible flood damage. In rare instances, you may need to shut off the gas supply in the event of a natural disaster.
Can I turn off my own gas supply?
By contrast, shutting off your natural gas supply is something you may never have to do. Work on branch gas lines in a home is not safe for amateurs and should be left to plumbers or gas company technicians. But most gas companies allow homeowners to shut off the gas at their own meters and even provide instructions for doing this safely.
What should I do if I Can’t locate the gas service shutoff valve?
If you still are not able to locate the gas service shutoff valve, contact PG&E for assistance to locate the valve. Do not shut off the gas unless you smell gas, hear gas escaping, see a broken gas line or if you suspect a gas leak. If you shut off the gas, there may be a considerable delay before PG&E can turn your service on.
How do they turn off the gas?
Locate your main gas service shutoff valve. It's usually the first fitting on the natural gas supply pipe coming out of the ground next to the meter. With a wrench, turn the lever in either direction until it is crosswise to the pipe. Once the gas is turned off, leave it off.
Can I turn gas back on myself?
NOTE: Once you have shut off the gas at the meter, do not try to turn it back on yourself. If the gas service shutoff valve is closed, PG&E or another qualified professional should perform a safety inspection before the gas service is restored and appliance pilots are relit.
How do I know if my gas is turned off?
When the long side of the nub or handle is parallel to the incoming gas line, it's open and the gas is flowing. When it's turned a quarter turn, perpendicular to the incoming pipe, it's closed.
What is emergency gas turn off for?
0:111:42How To: Use Emergency Gas Shutoff - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you smell gas in your home the first thing you should do is call 911. Call the gas company. YouMoreIf you smell gas in your home the first thing you should do is call 911. Call the gas company. You should have the numbers stored in your phone. The gas company will send somebody out an emergency
How do I turn my gas supply back on?
0:100:48How to: Restore your Supply - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere is a keypad press. The blue a button or the red B button the screen will light up and theMoreThere is a keypad press. The blue a button or the red B button the screen will light up and the meter will display press a to connect press the blue a button the meter will display press B to confirm.
How do I turn my gas line back on?
1:593:10How to turn off and on your Gas at the Meter - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd so I'm safe and so I'll just use the multi-tool to turn the back on. You just turn it here andMoreAnd so I'm safe and so I'll just use the multi-tool to turn the back on. You just turn it here and then twist it and it's back on again and it's that simple so if you ever have a gas leak.
Does gas automatically shutdown?
The straw starts to collapse as a vacuum is formed - this is what happens when the gas covers and starts getting pulled into the small pipe. Its that vacuum that forms that pulls the air out of the diaphragm in the nozzle and triggers the automatic shutoff. That's all it is.
How do I turn my gas back on after disconnecting?
You are going to need a wrench or gas shut off tool to do this. Very slowly, turn the meter back into the on position. The lever should be in line with the pipe after making a ninety-degree turn. Finally, you can re-light any of the pilot lights in your appliances.
Does the gas pump know when to shut off?
How do gas pumps know when to stop? As gasoline enters the tank, air begins to exit it. Gas pumps stop when there is no more air flowing through the nozzle and the change in air pressure causes the nozzle valve to shut automatically.
Will a furnace run if the gas is shut off?
The blower will run, but the furnace won't try to ignite and it won't matter whether the gas is turned on or off.
How does emergency gas shut off valve work?
Emergency shut-off valves are vital safety units in gas applications and are installed at the inlet and outlet phases of liquid or vapour lines. They function by responding to extreme changes in pressure, flow and temperatures by shutting off flow both upstream and downstream.
What is a gas shut in?
In the petroleum industry, shutting-in is the implementation of a production cap set lower than the available output of a specific site. This may be part of an attempt to constrict the oil supply or a necessary precaution when crews are evacuated ahead of a natural disaster.
How do you turn on a gas manually?
Turn the knob from the “Off” to the “Pilot” position. Push in the pilot knob, which manually sends gas into the system. Push the igniter button once every second until it lights.
Will pilot light go out if gas is turned off?
Pilot lights will occasionally go out. Sometimes the cause is easily resolved, such as running out of propane or turning off the gas. However, if the pilot light needs to be relit more than once per season, it should be inspected by a qualified service technician.
Is it safe to turn off gas valve?
For safety, a shut-off valve should be installed at every natural gas appliance. If a leak happens at a specific appliance, the valve allows you to turn off the natural gas at the appliance rather than shutting off all of your natural gas service. Some valves require a wrench to turn them.
Step 1: Locate Your Natural Gas Meter
It's important to know exactly where your natural gas meter is so you can find it in case of an emergency. The following diagram shows four possibl...
Step 2: Find The Natural Gas Shut-Off Valve
As you face the meter, you'll see a pipe running from the ground to the meter. There is a shut-off valve running parallel with the pipe, usually lo...
Natural Gas Shut-Off Valves
For safety, a shut-off valve should be installed at every natural gas appliance. If a leak happens at a specific appliance, the valve allows you to...
Electric Bonding Or Grounding
Do not use SoCalGas'® natural gas meter, natural gas piping, natural gas risers or related equipment for electrical bonding or grounding because it...
What to do if you turn off your gas meter?
CAUTION: If you turn off your natural gas at the meter, leave it off. Do not turn it back on yourself. Contact us to turn the meter back on and relight the pilots.
Can you turn off a gas meter if you smell gas?
NOTE: DO NOT turn off your meter unless you smell natural gas, hear the sound of gas escaping or see other signs of a leak--and ONLY if it's safe to do so. For more information, learn how to recognize and respond to a natural gas leak.
Can you use a natural gas meter for bonding?
Do not use SoCalGas' ® natural gas meter, natural gas piping, natural gas risers or related equipment for electrical bonding or grounding because it's not safe or permitted. Use caution when touching natural gas meters, risers, valves and attached components. Faulty household appliances or faulty household electrical wiring could inadvertently introduce electricity to natural gas facilities that can cause an electric shock.
Can you turn off natural gas at a gas meter?
NOTE: Once you have shut off the natural gas at the meter, do not try to turn it back on yourself. If the natural gas service shutoff valve is closed, SoCalGas or another qualified professional should perform a safety inspection before the natural gas service is restored and appliance pilots are relit.
Where should a gas shut off valve be located?
The gas meter and gas service shutoff valve is usually located on the side or in front of the building. If the building has a breezeway, it could be located there.
Is hot water connected to gas?
Electric and gas water heaters work differently to provide hot water to a household. While there are some water heaters that run on solar energy, oil and propane, the most common water heaters are fueled by either electricity or natural gas.
Can I relight the pilot light by myself?
If your pilot light goes out, your furnace will not be able to produce heat because its burners will not ignite. Often, homeowners can relight the pilot themselves.
Does gas leak if the pilot light goes out?
If the pilot light goes out on a storage or instantaneous hot water heater, space heater or a ducted heater, you will not have a gas leak. This is because all modern gas appliances with pilot lights have a fail-safe device that closes off the gas to the appliance in the case when the pilot may go out.
How does a gas valve work?
The furnace gas valve operates by electromagnets. The primary valve — also known as the safety valve — supplies gas to the pilot light. The second valve — also known as the main valve — allows gas to flow to the burner trays. The thermocouple (or thermopile) generates the power holds the safety valve open.
How do I turn the gas off?
Locate your main gas service shutoff valve. It’s usually the first fitting on the natural gas supply pipe coming out of the ground next to the meter. With a wrench, turn the lever in either direction until it is crosswise to the pipe. Once the gas is turned off, leave it off.
What does a gas valve look like?
The valve will usually look like a small rectangle, and you’ll need a special wrench to turn it. When it’s open, the long side is parallel to the incoming gas pipe. To stop the flow of gas, close the valve by turning it perpendicular to the incoming line.
What is the main shutoff for a house?
Same with electricity. The main shutoff for a house or building will be the meter. There will be shutoffs that control power to the block or local group of homes, as well.
Why are there valves around gas lines?
There’s going to be valves strategically placed around the gas network to allow shutting off parts of it and probably even to isolate parts of it.
How are C&I accounts disconnected?
Therefore, most C&I accounts are disconnected by either parking the transformer or disconnection of the secondary servic. Those are two types of outages.
How to get a locked tab off of a meter?
You may have to use wire snippers to clip the thin metal strip that keeps the locked tab in place.
What happens if a doctor signs a letter to the utility?
If the Doctor Signs it, it re-assigns the Responsibility for Payment from the PATIENT to the DOCTOR or MEDICAL FACILITY.
What happens if you fail to pay the electric company?
Fail to pay the Electric Company…and they WILL cut off your power to EVERYTHING.
How long can you go without a power bill?
You are entitled to at least one deferred payment in one year. This means you can go ONE month without the Power Company receiving Payment. Think of this you are away on Vacation when the Bill comes. This may also be the case with NY Con Ed, but I’m not sure (Con Ed’s Bill of Rights is suspiciously hard to get a hold of) But I DO know that if no Payment is received TWO consecutive months, a Termination order will be started.
How to turn off gas?
How to Turn Off Your Gas 1 Know where your main gas service shutoff valve is located 2 Keep an adjustable pipe or crescent-type wrench available to turn off the gas in case of an emergency 3 Know how to shut off the gas at the gas service shutoff valve 4 Leave it off until service can be restored safely by PG&E or another qualified professional
How to turn off gas at gas appliance?
To turn off the gas at the gas appliance, rotate the valve a quarter turn. Know which of your appliances use natural gas. Know where the appliance gas shutoff valves are located, and how to turn them off.
What to do if you can't find gas shut off valve?
If you still are not able to locate the gas service shutoff valve, contact PG&E for assistance to locate the valve.
What wrench to use to turn off gas?
Keep an adjustable pipe or crescent-type w rench available to turn off the gas in case of an emergency
Where is the gas shut off valve located?
Most gas appliances have a gas shutoff valve located near the appliance that lets you turn off the gas to that appliance only. In some cases, turning off the gas at the appliance's shutoff valve will suffice if there is a gas leak or the appliance needs to be replaced or serviced.
Where is the gas meter located?
In some cases, the gas meter can be located in a cabinet enclosure built into the building or located inside the building. In these cases, the gas service shutoff valve can be located outside on a section of gas service pipe next to the building, or near the gas meter.
How to turn off gas?from pge.com
How to Turn Off Your Gas 1 Know where your main gas service shutoff valve is located 2 Keep an adjustable pipe or crescent-type wrench available to turn off the gas in case of an emergency 3 Know how to shut off the gas at the gas service shutoff valve 4 Leave it off until service can be restored safely by PG&E or another qualified professional
How long can you disconnect from a utility in North Dakota?from needhelppayingbills.com
In addition, utilities must delay disconnect of heating and utility service for 30 days for customers who are age 65 or older, ill, or disabled.
How long can you wait to disconnect from gas in Iowa?from needhelppayingbills.com
Iowa- State law calls for a 30 day delay if physician certifies that disconnection would adversely affect the health of a household member. Another program calls for disconnection for all residential customers when <20° F. LIHEAP-certified customers have complete protection from the shut off of their service from Nov. 1 through March 31 regardless of temperature. In addition, the local utility must offer payment plan after moratorium. Those who notify their gas and electric utility that they are applying for the federal government LIHEAP certification through the local CAP agency may receive a 30 day stay from service disconnection during the moratorium period.
What is the ban on disconnecting from electric service in New Jersey?from needhelppayingbills.com
New Jersey- There is a ban in place on disconnection for customers receiving Lifeline, LIHEAP, TANF, SSI, PAAD or GA. The law also protects households that may be unable to pay overdue amounts on their utilities because of medical expenses, unemployment, or recent death of spouse. These plans are in effect during the winter, and summer when the temperature is above 95. Customers eligible for the Winter Termination Protection Program are placed on a budget plan and cannot be disconnected as long as they make good faith payments on their heating bills. During the heating season, a utility may not ask for a security deposit. If a customer is eligible for the Winter Termination Program, and the high temperature is forecast to be 90oor more at any time during the following 48 hours, an electric utility shall not discontinue residential service to a customer for reasons of nonpayment of a delinquent account, or failure to comply with a deferred payment agreement, or failure to pay a cash security deposit or guarantee. Another rules states that disconnection is delayed for up to two months if physician certifies that health of household member would be adversely affected from the termination of service. Customer must enter into a payment plan with their energy provider Cannot disconnect unless the customer owes more than $50 or more than three months of charges.
How long can you amortize your utility bill in California?from needhelppayingbills.com
California- A customer who provides a medical certification from a licensed physician and/or surgeon that termination of their utilities will be life threatening and who is unable to pay in normal period shall be permitted to amortize their bills over a period not to exceed 12 months. Regulations ensure that if a payment plan is implemented that service can’t be disconnected. Read more on California utility disconnection lawsspecifically established for Southern California Edison and Pacific Gas and Electric.
How long does it take to disconnect from a utility in Alaska?from needhelppayingbills.com
Alaska - Delay disconnection of heating and utilities for 15 days if household member is age 65 or older, seriously ill, disabled, or dependent on a life support system. Also no disconnection is allowed by state law for seriously ill, disabled, or if the customer has entered into a payment plan.
How long is a disconnection for a medical emergency?from needhelppayingbills.com
No disconnection is allowed if the customer agrees to and adheres to a payment plan on their outstanding bills. Disconnection is delayed 60 days with certification of medical emergency, may be renewed every 60 days as necessary. Commission approval is required for disconnection to medical emergency customers.
Why shut off gas?
The main shutoff valve controlling your home's natural gas supply may come into play during major construction or renovation involving gas lines or when closing up or shuttering a home, to prevent possible flood damage. In rare instances, you may need to shut off the gas supply in the event of a natural disaster.
How to close a gas valve?
To close the valve, use an adjustable wrench adjusted to fit snugly over the valve tab. You can also use clamping pliers or an open-end wrench. Turn the tab so it is fully perpendicular (90 degrees) to the gas line.
What does it mean when a gas meter has a hole in the tab?
NOTE: Many gas meter valves have a hole in the tab (or on a bracket attached to the tab) that will line up with a corresponding hole in the valve body when the gas valve is in the closed position. The utility company will use the hole to lock the valve in a closed position when the gas account is closed. When the holes in the valve handle are lined up, it indicates the valve is in the off position.
How thick is a gas shut off valve?
The shutoff valve has a rectangular (or flat-sided) tab that is about 1/2 inch thick; this is what you turn to shut off the gas. When the tab is parallel to the gas pipe, the valve is open and the gas is on. When it is fully perpendicular to the pipe, the valve is closed and the gas is off.
Where is the main gas shut off valve located?
Location of the Main Shutoff Valve. The main gas shutoff valve is located near the gas meter supplied by your utility company. Your gas meter may be located outside your home on an exterior wall, or it may be found inside your home on an outside wall—often in a basement or utility area, such as a garage or the mechanical room where ...
What to do if you smell gas in your house?
If there is a strong gas smell in your home, leave the house immediately and call the utility company from outside or from a neighbor's house. Do not attempt to shut off the gas supply at the meter or anywhere else. Even turning on a light switch can ignite a gas explosion inside a house.
Can you work on a branch gas line?
Work on branch gas lines in a home is not safe for amateurs and should be left to plumbers or gas company technicians. But most gas companies allow homeowners to shut off the gas at their own meters and even provide instructions for doing this safely.
Do you have to be at the house to turn on gas?
To have gas turned on, they require someone to be at the house, so you actually realize they are there.
Can turning off the gas on remotely cause a gas leak?
Turning the gas on remotely could cause a gas leak in your house because none of your pilot lights will be lit, but turning it off remotely poses no risk.
Can gas company turn on service without verifying?
its not so much a verification of who is who, it's a safety thing. No gas company will turn on service without verifying that someone is home. The gas company cannot remotely verify that no gas will leak out when the service is turned back on. they don't know if you have a 1920s water heater without a pilot light safety feature.
How to turn on gas after disconnect?
Turning the gas back on after a disconnect can be done with just a few simple steps. Be careful that you do not rush the process, or you may not see the results you are hoping for. Give the gas enough time to run freely again before you reach out to a professional. Keep some of the safety precautions in mind, as well. This short guide should give you all of the information you need to know to get your home back in working order.
What to do if you smell gas?
This can spell major issues with your connection. If you smell the gas, make sure to turn the gas valve off again until the connection can be corrected. Most people have all the ingredients they need on hand to run a simple test to see if gas is leaking.
What does it mean when you find a gas leak?
Finding a leak means that you should turn the gas valve back off until the connection can be corrected. At this point, you may consider hiring a professional if you cannot get the connection between your appliance and the gas line right.
How to restore gas to home?
You should never just rush to the gas valve and start twisting it. Prepare your home by turning off all of the gas appliances. Make sure that the pilot light in your furnace is turned off. This is the safest way to restore power to your gas appliances.
What prevents gas from flowing in a pipe?
Not only that, but some companies insert a diaphragm into the pipe that prevents the gas from flowing until they reconnect it.
Why do pilot lights come on?
It may take a few moments for the pilot lights to come back on because of the air in the line. Some experts recommend that you light the gas range first if you have one. This will allow the air to move through the pipes much more freely. Once you see the flames, you know that the gas is flowing through the lines again.
Where is the safety shut off valve?
Find the safety shut-off valve that you used to turn the gas off in the first place. It could be anywhere in the main gas line. If the valve is perpendicular to the main gas line it should be shut, and if it’s in line with the pipe then it should be open. You are going to need a wrench or gas shut off tool to do this.