Flame Temperatures
| Fuel | Flame Temperature |
| oxyhydrogen | 2,000 °C or more (3,600 °F, air) |
| propane | 2,820 °C (oxygen), 1,980 °C (air) |
| propane butane mix | 1,970 °C (air) |
| propylene | 2870 °C (oxygen) |
What is the flame temperature of a propane tank?
Flame Temperatures Fuel Flame Temperature oxyhydrogen 2,000 °C or more (3,600 °F, air) propane 2,820 °C (oxygen), 1,980 °C (air) propane butane mix 1,970 °C (air) propylene 2870 °C (oxygen) 12 more rows ...
Does propane burn hotter than acetylene?
This does not, however, mean that propane gives off less heat. Acetylene may burn hotter and can even pre-heat metal faster. However, with the proper knowledge, parts and setup, propane can actually match or even outperform acetylene.
Is Oxy propane cheaper than acetylene?
Oxy Propane Propane is the easiest fuel gas alternative to Acetylene to obtain and is normally supplied in cylinders on a Deposit basis, rather than rented (as is usually the case with Acetylene). For most users, Propane works out cheaper, especially for infrequent users of Oxygen + Fuel kits.
Can I use an oxy acetylene torch for Oxy propane?
Whilst a standard Oxy Acetylene Torch can be used for Oxy Propane/Propylene, it’s far from ideal. Propane & Propylene are slower burning gases. Propane & Propylene also travel through the system as a vapour, not a gas, not actually turning into a gas until they meet air.
How hot does Oxy propane get?
Oxygen + Propane produces a flame temperature of around 1800⁰C.
Is oxy acetylene hotter than propane?
Acetylene is hotter but gives off less heat. The majority of preheating is done with Oxygen / Propane. This is a fact. The available heat from propane is higher.
How hot is an oxy fuel flame?
about 3,200 deg.Oxyacetylene welding, commonly referred to as gas welding, is a process which relies on combustion of oxygen and acetylene. When mixed together in correct proportions within a hand-held torch or blowpipe, a relatively hot flame is produced with a temperature of about 3,200 deg.
Does propane burn as hot as acetylene?
It's true that acetylene burns hotter and can pre-heat metal faster. But with the right torch tips and technique, you'll find that propane can burn quite hot. Some torch users have even found that they could rival the heat output of acetylene under certain conditions.
What burns hotter acetylene or MAPP gas?
Although acetylene has a higher flame temperature (3160 °C, 5720 °F), MAPP has the advantage that it requires neither dilution nor special container fillers during transport, allowing a greater volume of fuel gas to be transported at the same given weight, and it is much safer in use.
How hot does a propane torch get?
3,600 °FAn air-fed torch's maximum temperature is around 2,000 °C (3,600 °F). However, a typical primary flame will only achieve 1,100 °C (2,000 °F) to 1,250 °C (2,250 °F). Oxygen-fed torches can be much hotter at up to 2,550 °C (4,600 °F).
What is the hottest burning gas?
Fuel Gas & Melting TemperaturesFuel GasMax TemperatureAcetylene3300°FPropane2800°FHydrogen2650°FMAPP®2900°F2 more rows
How hot is a welder's torch?
It is approximately 6,000 °F (3,300 °C) and provides enough heat to easily melt steel. In the inner cone the acetylene breaks down and partly burns to hydrogen and carbon monoxide, which in the outer cone combine with more oxygen from the surrounding air and burn.
How hot is a MAPP gas torch?
3,730 degrees FahrenheitMAP-Pro fuel has an in-air flame temperature of 3,730 degrees Fahrenheit.
Can you weld steel with oxy propane?
Sadly, the simple answer is NO, you need Oxygen and Acetylene to Fusion Weld. A lot of companies are now offering Propylene as an alternative to Acetylene.
Can you weld with a propane torch?
Yes, you can weld aluminum with a propane torch and aluminum brazing rods as long as it is for non-structural metals that are not weighted or stressed or critical parts. Propane torches are usually do not reach high enough temperatures to be capable of performing effective aluminum welds.
What is hotter than a propane torch?
Propylene burns substantially hotter than propane all on its own, but this inherent heat advantage is also enhanced by a unique internal feature of this torch.
What is hotter than a propane torch?
Propylene burns substantially hotter than propane all on its own, but this inherent heat advantage is also enhanced by a unique internal feature of this torch.
How hot does oxygen acetylene get?
The oxyacetylene process produces a high temperature flame, over 3000 degrees C, by the combustion of pure oxygen and acetylene.
What burns hotter propane or butane?
Propane produces more heat than butane and is more efficient in combustion. With both gases there are no long-term negative environmental impacts. Propane and butane are both safe, non-toxic, clean-burning fuels and a great source of energy for wide-ranging applications.
Can I use an oxy acetylene torch with propane?
Here's the rub, you CANNOT use Acetylene Equipment for Propane or Propylene! Sorry about that, but the internal materials are different and Propane will corrode the internal materials that Acetylene equipment is made of (Propylene is around 50% Propane).