Aruba RAP – the perfect solution for remote work
- the user receives in the office an access point configured for RAP mode
- comes home and connects the point with a cable to his router
- after which he has a corporate SSID, to which he connects as in the office.
What is an Aruba rap?
This basic RAP setup is about connecting the RAP to Aruba Controllers and the configuration on the Controller. A Remote AP is a normal AP, from a hardware point of view, which means, any Aruba AP can be a RAP. It is just a different mode of operation.
How do I connect the rap to the Aruba controller?
To allow the connection from the RAP to the controller, you need to add the RAP to the Remote AP whitelist as well: It is the same procedure as with the “Campus AP Whitelist”. You can also use an external server like ClearPass or even with Aruba Activate. After the RAP is connected to the Controller it will be shown as online:
How to convert instant AP to rap in ArubaOS?
Conversion: Instant AP can also be converted to RAPs by pointing to IP address of the Mobility Controller Hope you find this useful. Please post your feedback ! 2. RE: ArubaOS 8 - Setting up Remote Access Point (RAP)
What is the basic rap setup?
This basic RAP setup is about connecting the RAP to Aruba Controllers and the configuration on the Controller. Basic RAP Setup: What is a Remote AP A Remote AP is a normal AP, from a hardware point of view, which means, any Aruba AP can be a RAP. It is just a different mode of operation.
How is Aruba set up?
Connect the power cable to the power supply.Connect the power cable to the Aruba AP and plug the power into power.Connect the provided network cable to the black E0/PT connection on the bottom of the Aruba AP. ... Connect the other end of the network cable into an open port on your wireless router.More items...•
How does an Aruba device work?
How Does Aruba Instant On Work? An Aruba Instant On AP acts as a network router as well. In short, this means plugging in directly to the Internet right out of the box allows network setup to begin immediately. Aruba Instant On devices require no licenses, subscriptions, renewals, or prepaid contracts.
How is Aruba setting AP?
To customize AP parameters, complete the following steps:Click Configuration, Wireless.Select a group and then click Access Points. ... Click the AP that user want to customize.Click Edit. ... Configure the parameters described in table below as required and then click Save Settings. ... Click Save Settings and reboot the AP.
How does a remote Access Point work?
A remote Access Point enables organizations to extend their corporate wireless network SSIDs to a WatchGuard AP installed at the home office of a remote worker or at a small branch office. The remote AP uses industry-standard protocols to securely connect to an organization's corporate network over the public Internet.
What is an Aruba RAP device?
The multifunctional Aruba RAP-3 delivers secure 802.11n wireless and wired network access to corporate resources from branch and home offices.
Is an Aruba device a VPN?
Aruba VPN. Simple-to-use VPN services make it easy for users to connect securely with corporate resources anywhere. Aruba's Remote Access Points (RAPs) and Virtual Intranet Access (VIA) client offer a seamless home, small office, or anywhere experience.
How does Aruba AP communicate with controller?
You can either connect the AP directly to a port on the controller, or connect the AP to another switch or router that has layer-2 or layer-3 connectivity to the controller. If the Ethernet port on the controller is an 802.3af Power over Ethernet (PoE) port, the AP automatically uses it to power up.
How do I setup my Aruba controller?
Configuring your Aruba Mobility ControllerLog in to Aruba Mobility Controller.From the top menu, select Configuration.From the Switch menu, select Management.Click the Logging tab.From the Logging Servers menu, select Add.Type the IP address of the QRadar server that you want to collect logs.Click Add.More items...
What is IAP in Aruba?
A n Instant Access Point (IAP) can be installed at a single site or deployed across multiple geographically-dispersed locations. Designed specifically for easy deployment, and proactive management of networks, Instant is ideal for small customers or remote locations without any on-site IT administrator.
Does access point need to be wired?
A Wireless Access Point (WAP) allows several devices to connect via WiFi to a single network. The wired equivalent is a switch. But unlike a switch, a WAP does not need to be wired to the router.
How do I setup a wireless access point?
Connect the router to a power outlet and switch it on. PoE-compatible devices will not require a power outlet—just an Ethernet cable....Also, some devices turn on automatically as soon as they are connected to a power source.Deploy the Access Point. Find a good spot for the device. ... Connect the Cables. ... Configure. ... Viola!
Is access point a router?
Main Differences. The router acts as a hub that sets up a local area network and manages all of the devices and communication in it. An access point, on the other hand, is a sub-device within the local area network that provides another location for devices to connect from and enables more devices to be on the network.
Is Aruba a router?
Aruba Instant On access points replace a typical router. Just plug an Aruba Instant On access point into the cable that brings the internet into your home to enable your Wi-Fi network.
Does Aruba Instant On require Internet?
Do I need to have an existing internet connection to use Aruba Instant On? Yes. An internet connection is required to register and onboard your Instant On device using a mobile app or the web portal.
Does Aruba Instant On require a subscription?
Your network, your way. Manage your network anytime, from anywhere, on your phone or on the web with no additional licensing or subscription fees required.
How does Aruba Instant AP work?
1:122:18Aruba Instant Access Point Introduction - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first instant. Access point is in place it's easy to expand your wireless network to any size.MoreThe first instant. Access point is in place it's easy to expand your wireless network to any size. New. Access points automatically find the first instant ap.
How to configure L2TP IP pool?
To configure the L2TP IP pool, click Add in the Address Pools section. Configure the L2TP pool from which the APs will be assigned addresses, then click Done.
How to whitelist AP?
Navigate to Configuration > AP Installation (under Wireless) and then click the RAP Whitelist tab on the right side.
What is remote AP?
The remote AP requires an IP address to which it can connect to establish a VPN tunnel to the controller. This can be either a routable IP address you configure on the controller, or the address of an external router or firewall that forwards traffic to the controller.
How to provision an AP?
The easiest way to provision an AP is to use the Provisioning page in the WebUI, as described in the following steps: 1. Navigate to the Configuration > Wireless > AP Installation > Provisioning page. Select the remote AP and click Provision. 2.
What is a pre shared key?
You can use Pre-Shared Key (PSK) authentication to provision an individual remote AP or a group of remote APs using an Internet Key Exchange Pre-Shared Key (IKE PSK).
How to find IP address parameter in local database?
To view IP address parameter in the local database, navigate to the Configuration > Security > Authentication > Servers > Internal DB page .
What port does a secure controller use?
Communication between the AP and the secure controller uses the UDP 4500 port. When both the controller and the AP are behind NAT devices, configure the AP to use the NAT device’s public address as its master address. On the NAT device, you must enable NAT-T (UDP port 4500 only) and forward all packets to the public address of the NAT device on UDP port 4500 to the controller to ensure that the remote AP boots successfully.
