
How long will a motorcycle battery last without charging?
This is a question commonly asked in the months preceding winter when bikers often take a break. Lead acid batteries which are the most common in motorcycles can last between 2 and 4 months without charging. The age of the battery is a significant variable.
How long should you charge a motorcycle 6 volt battery?
The first time you charge a new battery, it will take significantly longer than subsequent charges. For 6v batteries, the first charge should be 10 hours, with regular charging taking 6 hours. For 12v batteries, the first charge should be 18 hours, with regular charging at 12 hours.
How to properly charge a motorcycle battery?
Use either a trickle, float, or smart charger for most battery types.
- Trickle, or fully manual, chargers are the easiest type to use. These chargers take the AC power and convert it to DC. ...
- Float chargers are another common type of charger. They provide a constant, gentle, current to the battery.
- Smart chargers monitor battery charge progress. ...
What is the best battery charger for a motorcycle?
Best Motorcycle Battery Trickle Charger. Suuwer automatic trickle battery charger 6v and 12v. A trickle charger is constantly working and slowly trickling a small charge into the battery, even when it's fully charged. US 12V 2A/6A Car Motorcycle Smart Automatic Maintainer from www.kisips.agh.edu.pl.

Does a new motorcycle battery need to be charged?
The battery will likely have a partial charge, up to 80%, but will need to be charged before use for maximum use. This can take anywhere between half an hour and ten hours depending on the battery and distributor. Know that when purchasing a new battery, you should expect to spend some time charging before use.
How long does it take to charge a new 12v motorcycle battery?
It will take between 4 and 24 hours to charge a motorcycle battery. To see if the process has been completed, you need to check the voltage every once in a while.
Can you over charge motorcycle battery?
Overcharging a battery can lead to all sort of problems: The electrolyte may boil, the battery can overheat and buckle the plates and, in extreme cases, the battery may even blow up, especially if excess hydrogen gas is released and there's a spark handy.
How long does it take to charge a motorcycle battery with a trickle charger?
Continually check the battery's voltage while charging to make sure that it is actually taking charge. If you do not have a smart charger, you can, of course, use an older motorcycle battery charger. However, be ready to wait as little as 4 hours and as long as 24 hours for your battery to be fully charged.
How do you charge a new motorcycle battery?
6:097:32J&P Cycles Pro Tips: How To Fill and Prep a New Motorcycle BatteryYouTubeStart of suggested clipEnd of suggested clipPretty simple all you need to do is. The ground goes to the negative. And the red goes to theMorePretty simple all you need to do is. The ground goes to the negative. And the red goes to the positive.
Can I jump a motorcycle with a car?
Car batteries have a much higher amperage than those in motorcycles, so we only recommend using a car to jump-start your bike in an emergency. It's also worth pointing out that using this method could possibly void the warranty on your battery and/or some electrical components of your bike.
What would drain a battery on a motorcycle?
There are several reasons why a motorcycle battery drains while riding including a bad battery terminal connection, corroded battery terminals, a bad stator, a bad rectifier/regulator, too many electrical add-ons, too old of a battery, and if you have a newer motorcycle, an automatic shut-off will happen if the battery ...
Can you start motorcycle while charging battery?
If your plan is to just start the motorcycle, over and over, and never actually ride the bike to put power back into your battery, you're just going to end up depleting your motorcycle battery, not refilling it. Motorcycle batteries don't do well with being left unfilled. It can harm their overall lifespan.
How long does it take to charge a dead motorcycle battery?
Conclusion. Recharging your motorcycle battery should take 2-3 hours, but may take up to 24 hours. Make sure not to overcharge it, or use a smart charger to be sure.
Does idling motorcycle charge battery?
Technically, a motorcycle battery does charge while the motorcycle is idling though it does not provide as much amperage as when the motorcycle is at higher speeds. During a normal ride, a motorcycle provides about 13, 14, or 15 amps while idling only provides less than 1 amp.
How do you start a motorcycle with a dead battery?
0:253:59So Your Motorcycle Has a Dead Battery. Now What? | MC GarageYouTubeStart of suggested clipEnd of suggested clipStep 1 connect the red clamps to the positive terminals on both vehicles. Step 2 connect the blackMoreStep 1 connect the red clamps to the positive terminals on both vehicles. Step 2 connect the black clamp to the negative terminal on the good battery.
Can you leave a trickle charger on all the time on a motorcycle?
You can use the trickle charger method occasionally and it will prolong the health of your motorcycle battery just fine. Hook the trickle charger up to the battery every few weeks or every other month and check in on the battery while it's charging so it doesn't get overcharged.
Does a motorcycle battery charge while idling?
Technically, a motorcycle battery does charge while the motorcycle is idling though it does not provide as much amperage as when the motorcycle is at higher speeds. During a normal ride, a motorcycle provides about 13, 14, or 15 amps while idling only provides less than 1 amp.
How long does it take to charge a motorcycle battery at 4 amps?
A typical bike battery anywhere from 8 amp hours to 15 amp hours would require 5 hours to charge at 2 amps and 2-3 hours to charge at 4 amps.
How Do Amps Affect Charging Time?
An Amp, which is short for Ampere, is a unit for measuring electric current. In other words, it measures how fast electricity moves through a device.
Is Trickle Charging a Good Idea?
Trickle charging is a great idea, especially for lead-acid batteries. Faster charging speeds can risk damaging the battery by causing corrosion or damaging the internal structure through increased temperatures.
How long does it take for a motorcycle battery to charge?
A motorcycle battery will get charged anywhere between 4 to 24 hours depending on the battery type, charger type, battery specifications, age and its condition.
How long does it take for a battery charger to charge?
It will take the charger 7 Hrs to completely charge the battery. However, this is an ideal scenario where we are assuming there will be no losses occurring.
Why does it take so long for a battery to charge?
Since higher capacity batteries will be storing higher amounts of charge, charging them will take ore time as opposed to low capacity batteries which will get charged faster since they have low charge storage.
What are the factors that determine the charging time of a battery?
The charging time of the battery is dependent on two factors – i) Battery Capacity; and ii) Charging Current.
What type of battery is used in motorcycles?
Lead acid battery is the widely used and old type battery found in most motorcycles.
Which charge rate is faster, ampere or ampere?
Higher ampere current will charge the battery at a much faster rate than the lower ampere current.
Which is better: a new battery or an old battery?
A new and well-maintained battery will charge faster than an old and poorly maintained battery.
When Should You Replace Your Motorcycle Battery?
It is very important to check your motorcycle battery every time you change the oil. To check your battery, you need to pay attention to the following things:
How many volts should a battery be?
It is very important to check that the voltage is between 12.6 to 13.3 volts, which means that the battery is excellent and should not be replaced. In fact, you need to replace your battery only when it shows a power of 12 volts or less.
What Type of Battery Should I Buy?
There are several types of batteries and you need to know about them. In fact, for each of the following batteries I will show you, there are many advantages and disadvantages. It is very important to choose a battery type according to your personal preference.
What is a lead acid battery?
Lead-acid batteries are the most common type of batteries. They are made up of a mixture of sulfuric acid and water, which creates an electrical charge. It is very important after buying this battery to let it charge for a day so that it will last longer.
Are there motorcycles that don’t run on batteries?
Lots of people who do not want to ride on a motorcycle driven by batteries ask me if there are motorcycles that do not operate on batteries.
I. Introduction
If you are owning any motor vehicle including a motorcycle, then you might have experienced the issue of dead battery at some point in time. This can cause a lot of inconveniences, especially in the modern motorcycle that does not have a kick start and depends heavily on the battery power.
II. How to charge a dead motorcycle battery?
In most cases, a dead motorcycle battery can be charged. However, if the battery is completely dead and lost its life, then charging it may not give a positive result and the only option is the new battery.
III. How long does it take to charge a motorcycle battery?
You can calculate the approximate charging time using the following formula. For doing this calculation you must know the ampere-hours of your battery and the charging current of your charger.
IV. Small brief about the types of motorcycle batteries
Your motorcycle battery can be a Lead acid battery, absorbed glass mat (AGM) battery, gel battery, or Lithium-ion battery.
VI. Conclusion
We have discussed the dead motorcycle battery in detail in this article and hopefully, it has made you a little wiser to take better care of your motorcycle battery. There are many critical parts in your motorcycle and battery is one among them. Please take good care of it.
How Does a Motorcycle Battery Charge?
As mentioned above, the motorcycle battery charges while riding, but it’s not an easy process.
How Long Would it Take to Charge the Battery?
Your motorbike needs a stator to produce electric charges but for how long should you ride your motorbike to charge the battery?
How does a motorcycle alternator work?
Your motorcycle alternator only works when your motorcycle is in motion. But to bring the motorbike into motion, you need a battery. Battery stores charge, which you need to ignite the motorbike engine. Without a battery, your motorbike wouldn’t generate enough power to ignite the engine.
What is the most important part of a motorcycle battery?
The motorcycle rectifier or regulator is the most crucial part which is needed to charge the battery. The stator produces AC electrical current, but the battery can only store DC electrical current. So to convert the AC electrical current to DC electrical energy, we need a rectifier.
Why do you need a stator on a motorbike?
In simpler words, it helps to convert mechanical into electrical energy. Without a stator, your motorbike won’t get any electrical charge and you’ll need to carry tens of motorbike batteries with you. In simpler words, you can’t ride a motorbike with a stator.
What causes a bike battery to discharge?
Stator not only causes your battery to discharge but also interfaces the common working mechanism of your motorbike.
Why do new motorcycles have stators?
Generally, new motorbikes come with a stator fitted in the motorcycle engine because of less space in the motorcycle.
How long can you charge a 12 amp motorcycle battery?
So a person who has a twelve amp battery would use a two amp charger on their battery for no longer than six hours. Six hours at two amps per hour should create twelve amps. If you plan to use a two amp charger on your motorcycle battery find the amp hours your battery has, divide that number by two, and the resulting number is how long you can ...
How to charge a bike battery with a 2 amp charger?
To charge your battery using a two amp charger you need to find a safe place to connect the charger so that the bike and the charger will be protected during the time it takes to charge the battery completely.
What is the Big Deal about Overcharging the Battery?
When a battery receives a greater charge than it is designed to handle the electrolytes inside the battery can reach a temperature high enough to allow them to come to a boil. The boiling electrolytes will cause the battery to overheat.
Why does my battery stop working?
In some cases, a battery that has reached this temperature can explode. Overheating your battery with a charger that is too big can cause your battery to stop working. It is not safe for your battery or for you.
What color is the battery charger cable?
The cable leads to a positive cable is often colored red so you do not connect the wrong polarity.
Does it take longer to charge a battery?
Yes, it takes longer to provide a full charge to a battery at a lower amperage setting like two amps. The good side of this slow charging is that your battery will be less likely to be damaged during the charging process.
Can you use trickle chargers on motorcycle batteries?
A lot of people wonder if they can connect their motorcycle batteries to trickle chargers that produce two amps. The trickle chargers are designed to slowly charge a battery so most people rationalize that using this amount of a charge over an extended period of time to charge their battery will be safe.

How Long Does It Take to Charge A Bike Battery
Relationship Between Charging Time and Charging Current
- The charging time of the batteryis dependent on two factors – i) Battery Capacity; and ii) Charging Current. The relationship is best defined as: Charging time of the battery = Battery Capacity / Charging Current The units corresponding to each unit are: Charging time in Hours (Hrs) Battery Capacity in Ampere-hour rating of the battery (Ah) Charging Current expressed in Amperes (A)
Factors Affecting The Battery Charging Time
- As discussed in the previous sections, the charging time of a motorcycle battery depends on various factors. 1. type of battery 2. type of charger 3. battery specifications 4. battery age and condition Let’s discuss each of these factors and their influence on the battery charging time in a bike.
Conclusion
- As can be seen, the battery charging time varies depending on the battery type, charger type, capacity, charging current, and the battery age and condition. On an average, a motorcycle battery should take anywhere between 4 to 24 hours to charge completely.
Related Questions
- Can Your Motorcycle Run Without A Battery?
Most modern motorcycles cannot run without a battery. If the battery is at marginal health and some life still left in it, motorcycle can be started with a push/bump start. The only exception where battery is not needed to run are motorcycles with magneto ignition, which can be seen in … - Why Is A Motorcycle Battery Not Charging?
The main reasons why a motorcycle battery is not charging are: 1. Battery is dead 2. Alternator is not working 3. Regulator – rectifier is damaged 4. Blown fuse in the motorcycle 5. Loose or broken wires in the charging circuit Check out our post which details out on these reasons why t…