How many people can fit at a 60 inch table?
8-10 people can fit at a 60″ round table . If you seat 10, everyone will not be able to slide their chairs under the table. If you have formal place settings, you definitely can’t fit more than 8. How many people can sit at a 72 inch (6ft) round table? 10-12 people can fit at a 72″ round table .
How many chairs fit in a 48 Round Table?
David Schroedersays: You can fit a few different sizes in the space you have. The big question is how many chairs/people you are looking to sit around the table. For example you could do a 48″ round and get 2-12″ leaves so it goes from sitting 4 people to 6-8 people.
How many chairs do I need for a 72 inch table?
72 inch table with 12 chairs. Note: these are not formal place settings with chargers If your guests will be seating for long periods of time (like for a formal dinner), go with the smaller number of people (for example, only put 8 at a 60 inch round). You will need the extra space for the formal table settings.
How many people can you seat at an 8’ table?
If you seat 8, the people on the end will not be able to slide their chairs under the table. If you have formal place settings, you definitely can’t fit more than 6. How many people can set at an 8′ (96″) banquet (rectangle) table?
How many chairs fit around an 84 inch table?
A: 84" x 42" tables seat 8 people.
How many people can sit at a 83 inch table?
Family dining (24” chair spacing) for oval tables: A 72” to 84” long oval table can seat up to 8 adults, depending on table width. A 96” to 108” long oval table can seat up to 10 adults, depending on table width. A 120” long oval table can seat up to 12 adults, depending on table width.
How many does a 90 inch table seat?
A 90″ rectangular dining table can seat up to 8 people comfortably.
How big is a table that seats 8?
For six to eight guests, your table should be at least 78" long. The rule of thumb is to allow 24" of space per seat at your dining table.
What size is a table that seats 6?
For Rectangular Tables: Most people find that a 6 foot long (72 inch) dining table is perfect for seating 6 comfortably.
How many does a 72 inch table seat?
If you have a 6 foot round table (72 inches), you can seat 8-10 people at the table. If it is a 30 inch by 72 inch rectangular table, 6-8 seats will fit around the table, with 3 chairs on either side and 1 chair at either end.
How long is a rectangle table that seats 10?
What big is a rectangular table that seats 10 people? Rectangular tables sized for ten people vary in widths from 3'6”-4'6” | 107-137 cm and lengths from 8'-10' | 244-305 cm.
How big is a 10 person round table?
Circular tables are measured by diameter. Therefore, a circular table that comfortably sits ten people would be about 84-inches in size.
How many chairs can fit around a 60 inch round table?
A 60” Round Table can comfortably seat 8 guests. Reducing the seating to 6 will give your guests more space. Many rental companies will state that a 60” Round Table can accommodate 8-10 guests. Although this is true, 10 chairs would be rather tight.
What is the standard size of a 4 seater dining table?
To seat four people, the table's diameter should be between 36 inches and 40 inches. To seat four to six people, the table's diameter should be between 40 inches and 60 inches.
What is the standard size of dining table?
Standard Sizes Of Dining Rooms And Dining Tables:2 Seater12 SeaterRoom Sizes8'x8′18'x10′Round TableMin 2'6″ Ideal 3ftMin 8ft Ideal 9ftRectangle / Oval Table2×2'6″ (61×76 cm)12'x4'6″ (366 x 135 cm)Square Table2'6″8ft
What is the length of a 10 seater dining table?
Dining Table Size GuideSize of Dining TableLengthWidth4 seater dining table75cm - 90cm75cm - 90cm6 seater dining table118cm - 140cm75cm - 90cm8 seater dining table150cm - 220cm75cm - 90cm10 seater dining table180cm - 280cm90cm - 100cm
What size is a round table that seats 10?
What size round table seats 10? A round table that's 8 feet in diameter can seat 10 to 12 people.
How big is a round banquet table that seats 10?
Seating PlannerSeating Capacity for TablesTable SizeNumber of People72 inch Round (6')Seats 10 – 12 Adults60 inch Round (5')Seats 8 – 10 Adults48 inch Round (4')Seats 6 – 8 Adults26 more rows
How big is a 10 person round table?
Circular tables are measured by diameter. Therefore, a circular table that comfortably sits ten people would be about 84-inches in size.
How high should a dining chair be?
Remember that the standard height for a table top surface is 30 inches and the standard seat height for dining chairs is 18 inches. This information will come in handy if you are considering using chairs that are not traditionally used as dining chairs. If they have a seat height of 18 inches, they will probably work. Be sure to consider armrest height as well, making sure they won't interfere with pulling a chair underneath the table.
How many people can sit at a 30x30 table?
A: 30" x 30" tables seat 2 people.
How much space between a table and wall?
It is optimal to have at least 42 inches between the edge of the table and a wall. This allows people to easily get in and out of their seating without feeling crammed under the table. 36 inches of space between the edge of the table and the wall is a bare minimum that you should never go below in an attempt to fit a larger table ...
How deep should a dining room table be?
Use the graphic below to size your dining table and layout your dining room. If you want to have end seating at your dining table, it needs to be at least 42" in depth. Otherwise, you will need to leave extra space at the ends to allow for the additional place settings, allowing for less seating along the sides of the table.
How much space does an extension table need?
Extension tables can be of use when you are trying to do more with less. If you want your table to have the comfortable 42 inches of space around it most of the time, and are willing to bump it down to 36 inches on certain occasions, you may be able to find an extension table that will accommodate both.
How many chairs can you fit at a table?
Then you would need at least 4-12″ leaves (120″L overall) to sit 12 comfortably at the table. Since the table would be 48″W you’d be able to position 2 chairs at the ends. Rectangular table tops work best for this sort of set up. Trestle tablesare your best bet for this sort of set up but double pedestalswork as well. We wouldn’t recommend leg tables since you lose your corners due to the legs.
How wide should a table be for 6 people?
We recommend 42 inches wide by 72 inches long for a table with 6 chairs. This allows for 6 chairs to sit comfortably around the table and gives everyone plenty of leg and elbow room. If you are considering a farm house style leg table you could go to 42 inches wide by 66 inches long. It will make things a little tighter on everyone but you would still be able to have 6 chairs around the table.
What size table should I use for an apartment?
If you’re looking for an apartment sized table with four chairs, I’d recommend either a 42″ or 48″ (round or square) table. The two styles of tables you can choose from is either a leg tableor single pedestal. When it comes to chairs, it’s always best to find a table first, then choose your chairs based on the style of the table. You can browse our selection of dining chairsfor chairs. Pricing is available on both the tables and chairs. Hope this helps!
How much space between chairs?
Chair space can vary but a comfortable number is usually a 3″ gap between each chair.
How many people can sit on a 42 x 60 table?
On any style table, a 42″ x 60″ and 42″ x 66″ will seat 6 people. A 42″ x 72″ can sit 8 people but only in a double pedestal style. Leg tables and trestle tables will have the legs and middle base get in the way. They’ll only be able to seat 6 unless you add leaves.
How many people can sit on a table with leaves?
Almost any table can come with leaves. The rule of thumb we like to use is for every 2 leaves, you can sit an additional 2 people. This also applies to 1 leaf. When you add in one leaf, you’ll be able to add an additional person to each side. Each of our leaves will be 12″ wide (unless otherwise specified).
What is the width of a table?
Widths. Typically, most tables come in a 42″w standard. You are able to increase that to a 48″ wide. This doesn’t increase the amount of people you can sit at your table. This just creates some extra leg room for those on the corners.
How wide should a dining room table be?
At most, you'll want a table that is about 72" long by 36 " wide (this allows for 48" between the room entrance and the table, and 36" between the table and other three walls). Make sure to account for other furniture in the room, such as a buffet or drinks cart, and shrink your table accordingly. If you are worried about occasional events such as holidays, where you'll need to seat more people, consider a table that can expand. That way, you'll have good flow around the table most of the time, and only have to squeeze when you really need the extra space for guests.
How many people can sit at a rectangular table?
Stretching the length to 72" will allow you to comfortably seat 8 people, and increasing the size to 72" x 48" will allow you to comfortably seat 10. If rectangular tables are too angular for your tastes, try an oval shaped table for a softer look.
What makes a square table look smaller?
On the other hand, square tables take up a lot of space, much more than you would think, and can visual dominate a room (though going with a reflective or transparent table top material, such as polished stone or glass, can help make your table seem smaller ). While they can be great for conversation since you can see everyone at once, Joanna Tovia over at Houzz.com points out that if your table is too large, it can be hard to hear people on the other side. That extra space in the center can also make it harder to pass dishes across the table.
What is the best shape for a dining table?
Table Shape: The best shaped table for you will depend on your dining space, what type of entertaining you usually do, and the number of guests you plan to accommodate. Rectangular dining tables are the most traditional and popular choice, but square and round tables are having their moment, especially in open plan spaces.
How much space should I leave around a dining table?
Your Room: The first thing you'll want to consider is the size of your dining space. Generally speaking, you'll want to leave about 36" of space around the table, meaning 3 feet between the edge of the table and your walls or furniture pieces. This allows for a good amount of space to move around the table, and makes it easier to pull out chairs and sit or stand without awkward contortionist moves. If you have the space, Gabrielle Di Stefano over at Houzz.com recommends leaving 48" between the edge of the table and the entrance to the room, so your guests aren't squeezing past each other on their way to the table.
How big is a 30" table?
A 28" to 30" wide table can feel very personal and cozy, while wider tables can start to feel a bit more formal. Keep in mind though, if you have a very large space, a narrow table may look undersized. A good starting size for a rectangular table is 60" x 30", with that size, you can accommodate 6 guests comfortably, and a few more in a pinch.
What is a square table?
Square tables are very modern and trendy, and work great as counter height or bar height options. Square tables are great for conversation, as you can see everyone around the table easily. Square tables have a great amount of space in the middle, leaving you plenty of room for shared dishes and creative center pieces.
How many chairs are needed for a 72 inch table?
72 inch table with 12 chairs. Note: these are not formal place settings with chargers
How many people can fit at a 72" round table?
10-12 people can fit at a 72″ round table . If you seat 12, everyone will not be able to slide their chairs under the table. If you have formal place settings, you definitely can’t fit more than 10.
How to choose a table?
Other things to consider when you are choosing a table: 1 You want to have 24″ of aisle between tables. To compensate for chairs, round tables should be set 54 inches apart, and rectangle tables should be set 60 inches apart. 2 The 72 inch round table has a huge space in the middle so you need a wider centerpiece. (Note on centerpieces: keep centerpieces below eye level or less than 12 inches tall. If you want to use a tall centerpiece, keep it slim so it doesn’t interfere with the guests’ view of each other. Check out this article on flower costs for some great tips for DIY centerpieces.) 3 The 72 inch round table is so large that it is hard for people to talk across. (This is fine for louder events where people are really only going to talk to the people on either side of them.)
What size round table is best for banquet?
The 60 inch round is the most commonly used table. You can fit the most people in a space with this table (unless you want to go banquet style with rectangle tables lined up together).
How tall should a 72 inch round table be?
(Note on centerpieces: keep centerpieces below eye level or less than 12 inches tall. If you want to use a tall centerpiece, keep it slim so it doesn’t interfere with the guests’ view of each other.
Can you push chairs under a rectangle table?
If you use the higher number on the rectangle tables, you cannot push all of the chairs completely under the table.
Factors That Limit How Many Chairs You Can Fit at an 8 Ft. Table
There are several outside elements that dictate how many chairs can, and will, fit at an 8 ft. table. It’s important to keep these in mind as you’re planning an event or making space for the table:
How Shape Affects Chair Space at an 8 Ft. Table
There are four types of tables you can choose from. Of course, this depends on how you plan to use your 8 ft. table. Each has its advantages and comes in varying sizes besides 8-ft. Up next, we’ll dive into the details of how table shape can affect the amount of chairs you can fit at an 8 ft. table.
Choosing the Right Chairs to Maximize Space at Your 8 Ft. Table
Once you choose the right table size, make sure you have the best fitting chairs to go around it. Most furniture follows standard measurements.
Final Thoughts
Whether you choose an 8-ft table or decide to go with a smaller size, the most important factor you can consider while deciding the appropriate number of chairs is comfort. By properly utilizing the space around your table and chairs, creating a convenient and comfortable dining space doesn’t need to be overwhelming.
How much space between round tables?
We recommend 54'' (137 cm) of spacing between round tables (table edge to table edge).
What happens if a dining table is too small?
If a dining table is too small, it will be uncomfortable for the guests. And if it is too big, it will feel naked. There are two main categories of dining tables: round dining tables and rectangular dining tables. In this page, you can determine sizes for round dining tables.
Size of chairs for 54 inch round table
We are looking for 6 chairs to fit around a 54 inch round dining room table. What is the maximum width so that the table and chairs do not look cluttered?
Comments (12)
Thanks so much. We have seen chairs that we like that are 23 inches wide... specifically we are looking at the Century furniture Omni collection chair 559-531. Originally we saw chairs that we liked that were 25.5 inches. and we realized that would look too crowded. I am hoping that 23 inches will not be too crowded.
