How many wooden pallets fit on a 463L pallet?
six 463L palletsThe C-130 can accommodate up to six 463L pallets. Usable surface dimensions of a 463L pallet are 84 inches long by 104 inches wide. Pallet criteria according to position, weight, and height. For pallet positions 3 and 4, maintain a 6-inch aisle along the narrow side of the pallet.
How much does a 463L pallet weigh?
The pallet's empty weight is 290 lbs and its dimensions are 88" X 108" X 2.25". The net system is designed to connect with the rings and retain an equally dispersed load on the 463L pallet.
How much weight can a 463L pallet hold?
It can hold up to 10,000 lb (4,500 kg) of cargo (not exceeding 250 lb per square inch) at 8 g. Empty, each pallet weighs 290 lb (130 kg), or 355 lb (160 kg) with two side nets and a top net.
How big is a 463L pallet?
HCU 463L Air Cargo Pallet (HCU-6/E) Specs & Capabilities: Dimensions: 108" W x 88" L x 2-1/4" H. Tare Weight: 290 lbs. Capacity: 10,000 lbs.
How many 463L pallets fit on a c17?
Context in source publication. ... depicted in Figures 1 and 2, the C-17A has the unique ability to carry 463L pallets in the aerial delivery system (ADS) configuration, which accommodates a single row of 11 pallets, or the logistic delivery system (LGS), which accommodates two rows of 9 pallets each (18 total).
What is a NATO pallet?
NATO PALLET 1200mm x 1000mm The use of columnar ribs in the case walls can support a much taller pallet stack than corrugated boxes. This takes advantage of overhead cargo space that would otherwise be wasted. Handles on all ISP2 Cases will enhance the speed of deployment over conventional containers.
What is the max height for a 463L pallet?
96 inchesAs stated previously, the 463L pallet has a maximum height of 96 inches restraining 10,000 pounds. If the pallet exceeds 96 inches but is less that 100 inches, a maximum weight of 8,000 pounds is allowed.
How do you net a 463L pallet?
5:237:56Pallet Loading: Building A Pallet - YouTubeYouTubeStart of suggested clipEnd of suggested clipAfter hooking up the top net cinch it down with the tightening straps. This requires two peopleMoreAfter hooking up the top net cinch it down with the tightening straps. This requires two people opposite. Each other on the pallet pulling at the same time to ensure an even tightening of the top net.
How many c5 does the Air Force have?
The C-5M is a modernized version of the legacy C-5 designed and manufactured by Lockheed Martin. Currently the U.S. Air Force owns and operates 52 C-5B/C/M. They are stationed at Dover Air Force Base, Delaware; Travis AFB, California; Lackland AFB, Texas; and Westover Air Reserve Base, Massachusetts.
How long is a 60k Tunner?
49.3 ft.Length: 49.3 ft.
How wide is an average pallet?
48" X 40"Pallet FAQs The standard pallet size is 48" X 40" with each deck board being 3 ½" wide 5/16" thick. There are other pallet sizes that are standard across different industries but the above described GMA pallet is the most common and makes up more than 30% of all pallets used in the USA.
What is aircraft pallet?
A platform or pallet (in air freight usually from 3/4″ to 2″ thick) upon which a unitized shipment tests or on which goods are assembled and secured before being loaded as a unit onto aircraft. Most carriers offer container discounts for palletized loads.
How much does a standard pallet weight?
A standard pallet is 6 ½” tall. How much weight can a standard pallet hold? A standard pallet can hold up to 4,600 lbs.
How much does a 48x40 pallet weight?
33-48 lbs.48 x 40 Wooden GMA Pallet Measuring 48 inches long by 40 inches wide, this pallet is used in a variety of industries, including produce and grocery shipping. These pallets can weigh anywhere from 33-48 lbs. and is relatively lightweight for how much weight it can carry.
How do you calculate the weight of a pallet?
Companies like UPS and FedEx use a dimensional weight divisor of 139. To find the dimensional weight of your pallet shipment, divide the cubic size (LxWxH) by 139.
How much does a 40x48 wood pallet weigh?
35 to 40 lbsPallet Standard Generally, pallet sizes are inches. This standard pallet weight can vary from 35 to 40 lbs, depending on the thickness of the wood. For example a 48 x 40 4way pallet with 5/8 wood weights roughly 40 lbs and a pallet with ½ in boards would be 35 lbs.
What pallets does ACL use?
ACL Airshop has a large inventory of HCU-6/E 463L cargo pallets for use in Hercules C-130 aircraft.
How many locations does ACL Airshop have?
Locations With over 50 locations on 6 continents, ACL Airshop has an extensive network of locations to serve you at major airport hubs around the globe. Take Control of Your Air Cargo Assets Bluetooth ULD Tracking.
What is a 463L pallet?
The 463L cargo system includes a pallet of metal sandwich construction specifically designed for palletizing and transporting air cargo on roller type conveyors in the terminal , restraint rails and roller conveyors in the aircraft and cargo loading and unloading vehicles. It is equipped with locking arrangement for locking the pallet into the aircraft rail system for restraint during flight and tie-down rings to secure the NET, CARGO TIE-DOWN, AIRCRAFT PALLET. Excludes PALLET, MATERIAL HANDLING.
How wide is a 463L pallet?
The overall dimensions of the 463L pallet are 88 inches long by 108 inches wide by 2 1/4 inches thick. However, the usable dimensions of the upper surface are 84 inches wide by 104 inches long. This allows 2 inches around the periphery of the pallet to attach straps, nets, or other restraint devices.
Why are 463L pallets needed?
System 463L pallets and nets are essential to the effective use of the military airlift system. In normal operations they reduce aircraft ground time and allow for load preplanning. In emergency situations their availability at the right place and time can be the determining factor in the mission's success or failure. Steadily increasing costs require that these critical assets be managed carefully.
How to use pallet nets?
Only one bad strap or hook is enough to make the entire net unserviceable. Identify the long side (6 hooks) and short side (5 hooks) of the net and position so the hooks point inward while attached to the pallet rings. Place the two side nets around the cargo and fasten the hooks to the rings on the pallet. Make sure the straps of the net cross at the corners. Pull the net as high over the cargo as possible, but do not tighten the straps until the top net is hooked in place.
How many nets are there in a 463L pallet?
There are three nets to a set: one top net (yellow/tan) and two side nets (green/black). The side nets attach to the rings of the 463L pallet and the top net attaches by hooks to the rings on the side nets. Nets may be tightened using the adjustment points. The 463L pallet system and nets will restrain up to 10,000 pounds of general cargo 96 inches high.
What was the Air Force's cargo handling system before?
Before the development of the Air Force's 463L Materials-Handling System, individual pieces of cargo were floor-loaded by hand. However, as aircraft grew in size and productivity, cargo-handling and aircraft-loading efficiency were upgraded. The changes involved areas like the in-plane air-cargo systems, materials-handling equipment (MHE), and containers and pallet/net combinations, known as unit-load devices (ULDs). Military and civil transport aircraft were originally handled in the same way. But significant differences between the two airlift systems have evolved over the years. The military system relies heavily on the 88" X 108" pallets of the 463L Materials-Handling System. The civil system relies to a greater extent on containers and the 88" or 96" X 125" civil pallets.
What is pallet compatible with?
Pallets are compatible with materiel handling equipment (MHE) and aircraft rollers, rails, and locks. In order to stay in serviceable condition pallets must be supported by 3 pieces of dunnage. Dunnage may be lumber or plastic with the approximate dimensions 4" x 4" x 88". If pallets are stored in a stack, they should have some slope so rainwater does not pool on the pallet and rot the balsa wood core. Pallets must always be sent with 2 side nets, 1 top net, and 3 pieces of dunnage.
What is a 463L pallet?
The HCU-6/E or 463L Master Pallet is a standardized pallet used for transporting military air cargo.
When was the 463L pallet made?
The standard HCU-6/E pallet in the "463L" system was designed and finalized in the early 1960s by the AAR Cadillac Corp. to implement the "SS-463L Pallet Cargo Handling System" now known as "Materials Handling Support System "463L"".
What is the Air Force pallet?
It is the main air-cargo pallet of the United States Air Force, designed to be loaded and offloaded on today's military airlifters as well as many civilian Civil Reserve Air Fleet (CRAF) cargo aircraft.
How many rings are in a 463L?
They are built of a balsa wood core and surrounded by a thin aluminum skin. There are 22 tie-down rings surrounding the edge, each rated at 7,500 lb (3,400 kg).
When was the SS-463L developed?
Description. The "SS-463L" project was developed by a U.S. Air Force committee in 1957 and awarded to the Douglas Aircraft Company in 1959. The "SS-463L Pallet Cargo Handling System" specifications for aircraft (aka "463L") included a "Master Pallet" design to meet a component of the material handling specifications of this system.
Who made the master pallet?
The "Master Pallet" was contracted to the AAR Cadillac Manufacturing Corporation, at one time AAR Cadillac Corp, and now AAR Corp . In the 1950s, the U.S. Air Force used a standard designation system for all awarded projects.
How to determine the price of a pallet?
The first factor is whether the pallet or is made from new wood or recycled wood. If the pallet is made from new wood the pallet price will be based on materials. If the pallet is made from recycled or reclaimed wood pallets, then the price is based on the pallets grade.
What is the standard size pallet?
Pallet Size: The standard size pallet is a 48x40-inch pallet. The prices for 48x40-inch pallets are pretty standard but custom pallet prices are variable. Very large sized pallets or pallets in odd shapes can be more expensive that a standard pallet.
What is the best indicator of pallet price?
Determining the grade of a pallet is most likely the best indicator of what the pallet price will be. A-grade pallets have better durability and appearance than B-grade pallets but both will still do the job.
What happens if you repair a pallet?
Recycled pallets that are missing boards or have cracks need to be repaired. Repairing pallets is labor intensive and is a major input for pallet prices. If a pallet needs significant repairs the labor cost can go up which will increase the price of the pallet.
What are the factors that affect the price of pallets?
Several factors can affect wood prices. The 2 main factors influencing lumber prices are economic and environmental issues . Economic issues can range from industry demand for wood, trucking and transportation costs, lumber tariffs or trade issues. Environmental issues affect lumber prices could be forest health, government regulations, location of forests and mills.
How many types of plastic pallets are there?
There are more than 20 types of plastic pallets. You can get nearly any size and specification of plastic pallet. Prices are different on each type. Since plastic pallets have to be manufactured at a plastic plant, there is typically large shipping charges when buying pallets.
How long does it take to heat treat pallets?
Heat treatment kills bacteria and pests that may be on the pallets. Pallets that are heat-treated are placed in a kiln and heated to 140 degrees for 30 minutes. Once the pallet is heat-treated the pallet must be stamped. The heat-treatment certification stamp can be burned into the wood or stamped with ink.
