Can you put a tub over an existing tub?
The benefits of fitting a shower or tub over the existing model are multifold. Using this method allows a fresh new surface for the bath space without requiring the removal of the old model. Complete removal of the existing tub can be a costly job on its own, let alone the cost of installation for a new shower or tub.
What is the average cost to replace a tub?
Total cost for removing the old tub and installing a new one can run $1,500-$5,000 or more but averages $2,500-$3,500 depending on the ease of access, local rates, the quality of the new fixtures, and the extent of the repairs/replacements for the walls, plumbing and flooring.
How much does it cost to tile around a tub?
Then, how much does it cost to tile around a bathtub? For tile, materials and installation, a tub surround costs about $3,000 to $4,000, says Carlos Martinez, first officer of C-Bek Tile & Stone Design in North Hollywood, California. Floor tile adds another $3,000 to $4,500 or more, depending on the room's size.
Can you put a tub surround over existing tile?
Tub surrounds can sometimes be installed over existing tile, but only when conditions are right. The old tile area needs to be smaller than the kit and you'll need to build up the surrounding wall to the level of the tile, usually with 1/4-in. drywall. First, tape cardboard over the tub to protect it. Click to see full answer.
What is the labor cost to replace a bathtub?
The average rate for a general contractor is about $50 per hour. Considering the job could take up to 25 hours to complete, budget at least $1,250 for labor in addition to materials. A standard bathtub/shower combination averages $300 to $2,000 for materials.
How much does it cost to buy a new bathtub and have it installed?
Bathtub Installation Cost Installing a bathtub typically costs $7,197. The average price range is between $4,131 and $10,765, including labor and materials. The total cost depends on the type of tub and the scope of the project—you could pay as little as $600 or as much as $14,000, depending on the job complexity.
How much does a new shower and bathtub cost?
$2,190, Installed The estimated cost to replace a bathtub and shower is around $975 for a 60″ fiberglass or acrylic resin kit with shower walls, new tub, and DIY installation. The same tub replacement kit will cost approximately $2,190 for pro installation from a contractor near you.
What is the average price for a walk-in bathtub?
The average price of a walk-in tub ranges from $2,000 to $20,000. While many factors impact the total cost, the type of tub has the greatest influence. Accessories & Features: Soaking walk-in tub without additional features.
How much does it cost to replace bathtub with walk-in shower?
The Average Cost of Converting a Tub Into a Walk-In Shower The installation and costs of converting a tub into a walk-in shower range between $5,997 and $11,950, with average coming in at $7,997. Although it may seem like a wide range for a simple project, many other factors contribute to the total cost.
What is the average cost of a shower remodel?
Q. How much does it cost to remodel a shower? The average cost for a shower remodel is $6,576. However, the average range runs between $3,118 and $10,126, depending on the decisions you make and the cost of labor and materials in your area, and it can go much higher if you're focused on making the space luxurious.
Is it cheaper to install a bathtub or shower?
Cost. There's a big difference in the cost to install a shower compared to the cost to install a tub. If you want to convert an existing room into a new bathroom or add new fixtures in place, the costs for installing a shower average between $815 and $930. A tub will cost you anywhere from $1,100 to $1,800.
What is the average cost to replace a shower?
Installing a new shower costs $2,000 to $9,000 on average, depending on size, type, and materials. Shower replacement costs $1,000 to $8,000 for a prefab shower stall. Walk-in shower installation costs $3,500 to $15,000. The cost to install shower plumbing is $850 to $1,200.
How long does it take to install a bathtub?
Depending on your skill and knowledge level, anywhere from 3-4 hours to half a day, depending on the setup and layout of your bathroom.
Is it hard to replace a bathtub?
Replacing an old bathtub with a new bathtub is a very difficult project. Much of the tile on the walls will be damaged during the removal. If the old tub is readily accessible, the project can move quickly. If you have to open a wall to remove the old tub and position the new tub, the task is much harder.
Can I install a bathtub myself?
You can install a bathtub yourself if you are prepared to follow a detailed and sometimes frustrating process. Incorrect installation can result in water damage, an unlevel tub, and wasted money. Important factors that you need to consider include: Door width to move tub into bathroom.
How do you remove a bathtub and install it?
Choose Your Tub. Before you begin, measure your current bathtub alcove around the shower walls. ... Turn Off the Water. ... Disconnect the Drain Flange and Overflow Cover. ... Disconnect the Drain Assembly. ... Separate the Tub from the Wall. ... Remove the Tub. ... Dispose of the Old Tub. ... Set the New Tub Into Place.More items...
📅 How long does it take to replace a bathtub?
How long installation of a bathtub takes depends on the type of tub and the complexity of the installation. Some bathtubs can be fully installed wi...
👷 Is a tub installation something I can do myself?
It might be tempting to install a bathtub yourself, but this isn't considered a regular DIY project. Removing the heavy old one, making sure the pl...
♻️ Can I recycle my old bathtub?
Some bathtubs can be recycled or resold. If you own a cast iron tub, you may be able to sell it from a few hundred dollars to over $1000. If you do...
📏 Do I need to measure my doorway before I buy a tub?
Absolutely. You'll need a tub that can fit through the bathroom door and maneuver into place if it's a tight bathroom configuration. Some tubs can...
📐 How do I measure my tub?
To measure either your old tub or a new replacement tub, use a measuring tape and start with the length, the longest side. Measure from one side on...
How long does it take to replace a bathtub?
This project can take about 6 to 8 hours on average. If you encounter issues with water damage or the plumbing needs to run beneath the floor, it c...
How long does a bathtub last?
This depends on the tub. It is not unheard of for some cast iron tubs to last nearly 100 years. On the other hand, some acrylic tubs may only last...
Do plumbers install bathtubs?
They do. In fact, it is usually recommended that you have a plumber install your bathtub. This is because the tub also includes a drain and tub fil...
How much does a steel bathtub cost?
Steel bathtubs cost between $250 and $1,000. They have an enameled finish like cast iron bathtubs. However, you probably won't need extra floor reinforcements because steel tubs are more lightweight than cast iron. On the down side, they can be "noisy" and chip easily.
How much does it cost to upgrade an electric shower?
Upgrading your electrical panel could cost $500 to $1,800.
How much does a claw foot tub cost?
A freestanding clawfoot bathtub costs between $600 and $10,000, with an average of about $2,000. The more expensive models feature expensive materials like natural stone and copper. These tubs feature distinctive claw feet. Some homeowners love the vintage, classic look while others opt for the clean lines of a more modern model.
How much does a shower surround cost?
A bathtub or shower surround typically costs between $771 and $1,462. A surround lets you give your existing tub a new look while making your tub more functional and protecting the walls. A professional attaches the surround material of your choice (acrylic, fiberglass, tile, or something else) to three sides around your tub. Surrounds can work for standalone showers, bathtubs and tub and shower combos. Find out how much it costs to install a bathroom surround where you live.
What is a bathtub liner?
A bathtub liner is an acrylic (or other material) plastic liner that's molded to the shape of your existing tub. Then, with tape and glue, a professional adheres the liner to your tub. This way, you don't have to remove your tub or change plumbing.
What does a plumber do when replacing a tub?
If you're replacing a tub, you can expect your plumber to remove the plumbing fixtures from your old tub, remove the old tub, and hook up the new tub. This may include moving your hot and cold water pipes.
How much does it cost to install a bathtub in 98102?
For your project in zip code 98102 with these options, the cost to install a bathtub starts at $1,010.31-$1,782.61 per tub. Your actual price will depend on job size, conditions, finish options you choose.
How much does it cost to build a bathtub?
Then tile, using your choices of colors, styles, and shapes. You can add jets if you desire or make it a soaking tub. These tubs can be alcove or freestanding, depending on your design. They cost between $5,000 and $10,000, depending on the tile choice, size, and configuration.
How much does a solid surface bathtub cost?
The color goes all the way through the tub, so scratches and surface stains are easily buffed out. These tubs are mostly freestanding and available in a large array of contemporary colors and styles. They are very durable and hold heat better than acrylic, so they are growing in popularity. They cost between $2,000 and $6,000.
How long is a bathtub?
Bathtubs come in a full range of sizes, from small “birthday” baths that are just 3-feet long to oversized jetted tubs meant for two that are 6½-feet long. In addition to the length, tubs also come in all different widths and depths. These vary by the type of tub installation, as well as the tub function. Below is a basic size chart to help determine which tub best fits your needs.
How much does a corner tub cost?
They can be designed for a single user, or for two, with one bathing space extending along each wall. Installation is a choice between alcove-style with an apron front or undermounting into a deck. They cost between $1,000 and $5,000, depending on the size, material, and style.
What is the best material for a bathtub?
Acrylic Tub Cost. Acrylic is one of the most common materials for bathtubs of all varieties. It is lightweight, durable, and easy to care for. Acrylic tubs can be clawfoot, freestanding, jetted, air bath, or soaking styles, and they come in a wide variety of sizes, looks, and colors.
How wide is an alcove tub?
The tub is finished across its front, with an apron, while the back and sides fit flush against the wall. These tubs are usually 5-feet long and range from 30 to 36-inches wide.
What is a freestanding tub?
A freestanding bathtub is meant to be approachable from all sides. It does not need a deck or surround of any kind and can stand on the floor, a plinth, or a set of “feet.” Clawfoot tubs are an example of a freestanding tub and so are Roman, Greek, and Japanese tubs. Garden tubs are also a kind of freestanding tub, typically designed for soaking. Freestanding tubs come in many shapes, sizes, and materials, as well as styles. They can be made for soaking, come with jets, or be designed for air baths. They usually cost between $600 and $20,000.
How much does tile cost?
Tile flooring costs range between $7 and $24 per square foot with most homeowners spending $10 to $15 per square foot. The lowest cost floors are ceramic at an average cost of $10 per square foot, while marble floors will be $20 per square foot or more.
How much does it cost to install ceramic tile?
Ceramic tile installation costs between $7 and $14 per square foot on average which is almost half the price of porcelain tiling. The ceramic tiles alone cost $1 to $3 per square foot and are likely to be used in high-traffic areas, like a hallway.
How much does it cost to lay tile?
If there is already a subfloor in good, usable condition, then the cost to lay tile ranges from $7 to $15 per square foot for flooring. However, if the subfloor needs to be repaired or replaced, then you can expect to pay an additional $2.10 per square foot, which could add another $450 to $600 to your project cost. Also, the size and type of tiles being installed will affect your final price.
How much does porcelain tile cost?
Porcelain tile installation costs $12 to $19 per square foot and is usually about 50% more expensive than ceramic tiling. Because of porcelain tiles’ ability to resist stains and keep moisture at bay, they are typically installed in areas where there is a lot of moisture such as:
How much does it cost to tile a walk in shower?
The cost to tile a walk-in shower is $800 to $3,000. Large walk-in showers or high-end tile costs up to $10,000 to retile. Showers are normally built in either a square or a rectangular shape since most homeowners are installing a premanufactured shower base and not tiling the floor of the shower.
How much does it cost to tile a kitchen floor?
The average cost to tile a kitchen floor is $975 to $1,950 for a small 130 SF area, $1,208 to $2,415 for an average 161 SF kitchen, and $1,380 to $2,760 for a large 184 SF kitchen.
What is square tile?
Square tiles are the standard shape you will see. While selecting a design that does not use square tiles will typically give a more exciting finish, it will take longer per square foot, and as a result, it will cost more to install. The most commonly sold tile sizes are:
What materials are needed to install bathtub tile?
Cost of related materials and supplies typically required to install bathtub tile including: fabrication and polishing disposables, manufacturer recommended underlayment, fasteners, adhesives and surface sealants.
How to estimate project cost?
To estimate costs for your project: 1. Set Project Zip Code Enter the Zip Code for the location where labor is hired and materials purchased. 2. Specify Project Size and Options Enter the number of "square feet" required for the project. 3.
How much does tile cost?
Tile prices range from $0.80 per square foot to as high as $24 depending on the type you choose — most people spend $3 to $9 per square foot for materials. In general, you get what you pay for, but more expensive tile isn’t always better quality — higher prices may reflect artistic value.
How much does it cost to tile a bathroom floor?
The cost to tile an 80 square foot bathroom floor is $780–$1250 using vinyl, ceramic or porcelain tile. Vinyl and ceramic are bargain choices —but porcelain may be a better long-term value.
How much does it cost to install a tile floor?
The average labor cost to install a tile floor is $5.00 – $8.00 per square foot depending on tile choices and size. However, prices can vary due to sub-floor conditions and prep work. This project can be a DIY project.
Why choose tile for your home's walls, floors, or countertops when other materials cost less?
Why choose tile for your home’s walls, floors or countertops when other materials cost less? In a word — value. The lasting beauty and durability of tile make it among the most economical materials initial ly — and when you sell your home , you can expect a 60-70 percent return. Tile is a worthwhile investment in both today and tomorrow.
What is the best COF for tile?
Professionals recommend a COF higher than 0.41 for all indoor flooring — greater 0.60 is safer for floors that are frequently wet.
How many types of tile are there?
There are dozens of types of tile and tens of thousands of unique styles from which to choose. Each has different characteristics and installation challenges that make some a better choice than others for specific projects. The most common are:
How many tiles are in a walk in shower?
An average walk-in shower with three rectangular tile walls will set you back:
What is a fixed shower head?
Fixed shower head: As the name suggests, a fixed shower head is connected to the wall via a shower arm. With this type, you can have a massage style, rainfall, and even-water saving for a bit of variety, but the full head attachment is a single component that’s affixed to a set position in your shower.
What is the best enclosure for a shower?
Shower Enclosure. How you enclose your shower is another important decision, whether you want full glass, nothing at all, or something in between. Full glass: Surrounding your shower with glass is one of the most common enclosures. It provides an open, streamlined look and can make the shower area feel larger.
What is the centerpiece of a bathroom?
And the centerpiece of many bathrooms is a large tile shower. But how much does a tile shower cost?
What is niche in shower?
Here are some options. Tile niche: A niche is simply an area of the shower wall that has been recessed to use for storage. It’s convenient for holding shampoo bottles, soap, or other shower items. You can have or multiple niches, and the size can vary depending on your needs and the shower space available.
Where to hang towels in shower?
Towel bar: If you’d like a place to hang your towels close to your shower, a towel bar on the shower door can be the perfect choice. These come in several different materials and sizes, so you can select one that matches your style and that of your new shower space.
Can you have a shower with no door?
Open shower: If glass isn’t your style and space allows, an open shower (one with no door) could be an option. To create this look, you could do a full height glass wall and an opening for a door, just not install one. Or you could go very European with no walls. That usually entails a bit of extra cost to protect the rest of the bathroom space from splashing water.
Can you tile a shower without tile?
Tile. Of course, no tile shower is complete without the tile! When it comes to colors and patterns, the possibilities can seem endless, but the location of the tiles can dictate which styles may work best for you. Shower walls: Tiles for your shower walls come in a wide variety of sizes.
