Can you just fill in a pool with dirt?
Filling your pool with dirt is the fastest and most affordable way to get rid of a pool because there's no need to remove your concrete or metal shell. This saves on both labor and hauling costs. However, filling a pool with dirt is still a delicate process that requires careful preparation, drainage, and demolition.
How do you permanently close an inground pool?
Use a jackhammer, sledgehammer, or other tool to smash holes into the bottom of the pool. This will allow water to drain out of it in the future. Remove any top decking concrete walkways, coping tiles and any other concrete around the pool that you don't want anymore. Toss it into the pool over the holes you have made.
Is it worth it to get rid of pool?
Pros of Removing a Pool You save time and money on swimming pool maintenance. You have more yard space for other activities or landscaping opportunities. You no longer have the additional hazards and liabilities that come with pool ownership.
Do I need to winterize my pool in North Carolina?
Throughout much of North Carolina, we have little to no threat of extended-major ice formation due to our moderate winter temperatures. As such, most pools remain operational and we typically do not need to drain the filtration system of all water nor use any winterizing agents for the pool plumbing.
Does removing a pool decrease home value?
Pool removal could increase the value of your home. Your property value is more likely to go up when the pool you're removing has these factors: The pool takes up a lot of the backyard.
How much does it cost to fill in inground pool?
The average cost to fill in an inground pool is $4,000 to $16,000 for full demolition or $2,000 to $10,000 to fill in with dirt. An above ground pool removal costs $300 to $800, or $2,500 with a deck. The cost to get rid of a swimming pool depends on the size, depth, material, and accessibility.
What can be done with an unused inground pool?
50 Alternative Uses For Your Empty PoolSkate park.Bulldog skate park.Roller rink.Racquetball court.Handball court.Volleyball “equalizer” court (tall folk in the deep end, short folk in the shallow end)Dog park.Cat corral.More items...•
What can you do with an inground pool you don't want?
Here are three ideas for that unused pool:Remove it. The cost will depend on the size of your pool, and also on whether an earthmover can easily get into your yard. ... Retire it. ... Cover it temporarily.
Why do people get rid of pools?
The maintenance costs are becoming too high. The yearly cost of opening the pool and maintaining it throughout the season combined with the closing costs may just be too steep. This is the point to compare these costs, getting rid of it is cheaper. Also, you get your yard back.
Is it OK to leave a pool uncovered in winter?
Pool Closing Mistake 1: Skipping the Pool Cover However, an uncovered pool will cost you far more over the span of a few short years than a simple pool cover. For one thing, an uncovered pool will become a catch-all for leaves and debris. Those leaves will spend all winter stewing away in the bottom of your pool.
Can I leave my pool open in the winter?
Yes! You don't have to close the pool, and you can keep it open year 'round, with or without a pool heater. Or for those in very cold climates, you could also consider a very late closing and early opening, winterizing and closing the pool for just 3 or 4 months, instead of the normal 6 or 7 months.
Should you cover your pool pump in the winter?
A cover will not help the filter from freezing, but will protect the exterior from oxidization. A simple canvas cover or tarp with tie-down straps can be used to cover the filter, but should be removed prior to the commissioning of your swimming pool or, at minimum, the startup of the filter.
What can be done with an unused inground pool?
50 Alternative Uses For Your Empty PoolSkate park.Bulldog skate park.Roller rink.Racquetball court.Handball court.Volleyball “equalizer” court (tall folk in the deep end, short folk in the shallow end)Dog park.Cat corral.More items...•
Can you not open a pool for a year?
A pool isn't designed to be stagnant during the warm months of the year, and pool covers deteriorate faster in strong summer sunlight. Leaving the pool closed all summer is a guaranteed way to end up with a green, smelly mess and permanent stains or damage to the pool surfaces.
What can you do with an inground pool you don't want?
Here are three ideas for that unused pool:Remove it. The cost will depend on the size of your pool, and also on whether an earthmover can easily get into your yard. ... Retire it. ... Cover it temporarily.
How do you decommission an inground pool?
Inground pool removal typically involves draining the pool, drilling holes in the bottom, demolishing the top, and filling the pool with the rubble and additional dirt soil. However, above ground pool removal is less complicated, involving just draining the pool, tearing it down, and hauling it away.
What to do when closing a pool?
The process involves dozens of steps, including preparing the water and adjusting the chemicals, cleaning and storing all equipment, draining some (but not all) of the pool water, draining all pipes and equipment, shutting off the filter and covering the pool. According to pool industy expert Swimming Pool Steve, you should have these items on hand when closing your pool.
Why is it important to winterize a pool?
But winterizing your pool is an extremely important step, particularly in harsh climates, to keep it in good condition and prolong the lifespan. Failing to winterize a pool can lead to burst pipes, a damaged or failed filtration system, cracked tiles or walls and more.
How much does it cost to winterize a pool?
Most homeowners will spend between $125 and $375 to have their pool winterized by a professional. The national average reported cost is $232. The minimum cost a homeowner paid was $50 while the maximum reported cost was $700.
What to do if playback doesn't begin?
If playback doesn't begin shortly, try restarting your device.
Can closing a pool affect the price?
Your location and the pool’s condition also impact price. Closing a pool can also be a DIY project - if you know what you’re doing. That’s a big IF because skipping even one important step can lead to major damage. If you decide to tackle the project, be sure to follow the manufacturer’s step-by-step instructions.
Do you need antifreeze for a pool?
If you live in an extremely cold climate, you’ll need to add swimming pool antifreeze, which is not the same as car antifreeze.
Can you replace a step by step guide for a pool?
However, this should not replace your step-by-step manufacturer’s guide or, in the case of a custom-built pool, professional instruction .
What kind of filter do pool owners use?
Pools usually use one of three types of filters: cartridge, sand, or diatomaceous earth (DE). One issue causing filter problems can be that pool owners replace their pool pump with a larger model that doesn’t match the current filter in place. This can push water through the filter too quickly for it to filter the water properly. On the opposite end, pool owners can buy a replacement filter that’s too small for the pump. A new inground pool filter costs $385–$1,600.
Why does my pool heater not work?
Any number of things can cause a pool heater to malfunction. Sometimes tubes are clogged, so check for buildup and clean it out before calling a technician.
How much does it cost to close a pool in the winter?
The cost of closing a pool for the winter can range from $365 to $650 for pools up to 20’ x 40’ with vacuuming at about $85 per hour, winter filter cleaning at $25 each, and cleaning solid pool covers at $125 adding to the cost.
What is the basic maintenance of a fiberglass pool?
Basic maintenance includes testing water chemistry, checking filters, settings, and equipment. While a fiberglass pool needs little maintenance, the chemicals required to keep water pH levels right in a concrete pool can be triple those costs.
How much does a chlorine generator cost?
Salt water chlorine generators can cost about $330. They use cells, costing $200 for a simple one up to $1,400 for a high-tech cell that sends you readouts of your water’s salt levels, cleanliness, temp, and flow, saving you testing time. Generator cells chemically change salt into chlorine with an electric charge.
What is the best way to clean a pool?
Clean the walls and floor of the pool with a handheld or automatic pool vacuum. The ones that require the least manual labor are automatic vacuums that crawl every inch of the pool.
Why is it important to maintain a pool?
Swimming pool maintenance is vital if you want your pool to stay usable and last as long as possible before its resurface, or replacement comes due . Naturally, it’s easier to hire a pool maintenance company to handle these tasks for you.
What happens if you don't use your pool year round?
If you do not use your pool year-round, you will likely winterize and close it for the colder months. When the weather warms up, you want to get your pool ready for use again. This process opens the pool for the season and may be simple or involved, depending on the pool’s condition and how long it has been closed.
How long does it take for a pool to warm up?
Unless your pool was in poor condition, missing a cover, not closed properly, or closed for a significant period, it is likely ready for use in 1 to 2 days for above-ground pools and in-ground pools with a heater. Some large in-ground pools may need a few additional days to warm, while saltwater pools need an extra day to filter.
What do you need to know about saltwater pool?
With a saltwater pool, you need to cover all the basics like reconnecting the filter, cleaning the walls, and refilling the water level. You also need to make sure your saltwater generator is working, and you are using a saltwater test kit to check the levels.
Why do pool tiles fall off?
This is to balance the pool’s pH because your water leaves deposits on the concrete with a level that is too high. Water that is too low in pH pulls what it requires from the concrete or grout 3, causing tiles to fall off.
What is the chemical selection for a pool?
The chemical selection varies from pool to pool but usually consists of a scale remover, shock, a pH balancer, chlorine tablets, stabilizers, and algaecides. You should purchase a test kit to find out what your pool needs.
How long after opening pool can you swim?
Typically, experts recommend waiting 24 hours after opening the pool and applying chemical treatments before swimming in it.
How much does it cost to vacuum a pool?
This is due to sediment or debris settling at the bottom. Most professionals vacuum the pool as a part of the opening process, but if you open it, you may want to invest in a pool vacuum for around $300 to $500.
How much does an inground pool cost?
Inground pool costs range from $18,000 to $85,000 with pool owners typically spending between $28,000 and $55,000. The excavation and total labor costs make up 25% to 50% of the pool's cost, followed by a variance in pricing based on the type of pool materials.
How much does it cost to build an inground pool?
Inground pools cost between $50 to $125 per square foot to install without any upgrades, whereas above ground pools range from $8 to $16 per square foot. Custom pool upgrades like a pool deck, fence, hot tub, lighting, or a cover, will add $2,000 to $10,000 to your project cost.
How much does it cost to install a pool?
Swimming pool installation costs from $1,000 to $55,000, with inground pool prices at $35,000 on average, and above ground pools at $2,800. The cost mainly depends on the size and depth of the pool and if it’s installed above or inground. Additional features and different types of pools can easily double the cost.
How much does it cost to clean a saltwater pool?
The benefits of a saltwater pool include not having the smell and irritation of chlorine on the skin and the lower maintenance costs of $45 per month, or $80 to $150 per month if you pay a cleaning service.
Why is an indoor pool better than a pool outside?
An indoor pool offers year-round swimming, less maintenance because debris can't get into the pool, and less chemical use as there is little sunlight disrupting chlorine levels. However, they come at a much higher construction cost and uses more energy.
Why is my pool cracking and leaking?
Unexpected costs can be added on if you hire someone to excavate and your soil is too rocky for them to complete the job for the given estimate; and if the soil isn’t backfilled correctly, the additional pressure on the pool during heavy rains can cause it to crack and leak.
Why are pool costs so high?
Costs for building a pool in your backyard are high because of all the stages of work that go into it.
Inground Pool Costs
Those who live in warm climates may consider an inground pool a necessity, especially in the warmer months. Others may consider it a luxury, and some may even think of it as an investment for their property. They are beautiful water features that add fun to a backyard and value to a home.
Cost to Install an Inground Pool
The cost to install an inground pool is $35,000 on average and can range from $28,000 to $55,000 and sometimes upwards of $65,000 for special customizations and extra features. An added hot tub, for example, will cost $6,000 to $15,000 and pool lighting will be another $700 to $1,800.
Inground Pool Cost by Material
The overall price of pool installation will depend on what material you use. In general, vinyl costs the least and concrete the most, while inground pools made of fiberglass lie in the middle.
Small Inground Pool Cost
River Pools and Spas considers pools that are under 26 feet long and up to 12 or 13 feet wide to be small pools. Some examples are plunge and spool pools that cost between $10,000 and $15,000 or more each. Smaller pools are typically used for lounging or quickly cooling off, not for strenuous swimming or play.
Inground Pool Installation: Pro vs. DIY
While a handy homeowning DIYer who has completed an inground pool installation may be able to take on this task, we recommend hiring a professional pool installer for the job. Considering the high costs to install an inground pool, a poor DIY job could cost you tens of thousands of dollars, which is not worth it in the long run.
Why Do Pools Cost So Much?
Installing a swimming pool is an excellent way to add some fun to your summers and potentially increase your home’s market value. Unfortunately, swimming pools have high upfront costs and maintenance fees, regardless of whether you opt for in-ground or above-ground installations. Here are five reasons pools are so expensive:
How Much Does an In-ground Pool Cost?
There are several factors that impact the total cost of installing a new in-ground pool. As we mentioned above, most homeowners pay between $28,000 and $55,000 for new in-ground pools. The average cost is somewhere around $35,000. Additional repairs and maintenance can easily add $2,500 and $5,000 annually.
Additional Features and Add-Ons
There are a lot of factors that impact the total costs of constructing a new in-ground pool. However, most homeowners include additional features and add-ons that increase the total costs.
How Much Does an Above-Ground Pool Cost?
There are several different factors that impact the price of a new above-ground pool installation. Factors can include size, material, landscape, brand, and more.
Additional Features and Add-Ons
Now you know about some of the factors that affect the cost of an above-ground pool installation. You might want add-ons, such as decks, covers, lights, and more. Here are some common features, add-ons, and pool services to consider to help you determine extra costs.
How Can You Save Money Building a Pool?
Now that we’ve covered how expensive in-ground and above-ground pool installations can be, you’re probably wondering, “How can I save on costs?” Luckily, there are multiple ways you can save money when building a new pool.
Is It Worth the Money to Put in a Pool?
We’ve covered and compared the costs of a new in-ground and above-ground pool installation. So now you’re probably wondering, “Is it worth the money to build a new pool?” The answer will depend on several different factors. Here’s what to keep in mind when considering a new pool project.
How Much Does It Cost to Install a Pool Enclosure per Square Foot?
On average, pool enclosures range from roughly $8 to $200 per square foot, depending on the materials and style.
What is a pool enclosure made of?
A portable pool enclosure is typically made of screens or nylon.
What is a portable pool enclosure?
A portable pool enclosure is typically made of screens or nylon. They allow you to do it yourself instead of having to hire a professional and are typically easier to put up and take down. Keep in mind that portable pool enclosures will need to be put up and taken down each season.
How much does a low pool enclosure cost?
These low pool enclosures cost about $25 per square foot and typically only go about 1-2 feet above the surface of the pool.
How much does it cost to build a pool enclosure?
Building a swimming pool enclosure costs an average of $9,650. Most jobs range between $5,050 and $14,250. Pool enclosure cost is determined by the appearance, specific benefits that are important to you, size and your budget. First, decide on the size.
What is the difference between a high and medium pool enclosure?
Medium pool enclosures offer plenty of freedom of movement in and out of the pool but are still low enough to prevent obstruction of important views. This is also a more cost-effective option for putting together a pool area on a budget. High pool enclosures offer an outdoor "room" with a full-size ceiling that may even go higher ...
How much does a doggy door cost?
The most expensive option, a doggy door, typically costs somewhere from around $150 to $500. These are very versatile and can be made in several different sizes and materials.
