A paver patio costs $10 to $17 per square foot to install, with most homeowners spending between $1,900 to $6,800 depending on the size, labor, and materials. The average cost of pavers alone is $2 to $4 per square foot for either clay brick, concrete, or natural stone.
How many pavers do I need for my patio?
That means you need one paver per square foot, which makes sense since a 12″ x 12″ paver is 1 square foot. Step Three: Calculate Pavers Needed After you have found the square footage of both the project and the paver, determining the number of pavers needed is as simple as dividing the patio’s square footage by the paver’s square footage.
How much slope should a paver patio have?
Once everything is in place, determine the required amount of slope based on the size of your paver patio. Keep in mind that the slope should be at least 1 inch for every 8 feet of the paver patio. For instance, a 16-foot patio will require 2 inches of the slope while a 12-foot patio will require 1 1/2 inches of the slope.
How to install a paver patio like a pro?
When you're building a patio, you'll make layers using these materials:
- A 6-inch layer of gravel for the paver base
- A 1-inch layer of sand
- DIY patio pavers
- Paver sand
How much do pavers cost per square foot?
To estimate the total pavers cost simply state the price of a single brick, and the paver calculator will do the work for you. To get the estimated cost of installation, put in the cost of installation per square foot. Typically, it costs somewhere between $8 and $20, but the prices will vary depending on your location.
How much does a 20x20 paver patio cost?
A 20x20 brick paver patio costs $3,800 to $6,800. The average cost of pavers and base materials is $4 to $6 per square foot, while labor runs $6 to $11 per square foot. Get free estimates from masonry contractors near you or view our cost guide below.
How much does a 12 by 12 paver patio cost?
Factors in Calculating Paver Patio Cost To purchase and install most pavers, expect to pay an average of $8 to $25 per square foot, according to HomeAdvisor. If you choose a high-end stone, the cost could rise to $50 per square foot.
Is it cheaper to do a paver patio or concrete?
As far as installation costs and concrete costs go, poured concrete is technically the most affordable per square foot. However, even though the upfront cost of pavers is higher, concrete pavers offer greater value and durability than poured concrete and stamped concrete.
Does paver patio add value to home?
When homeowners invest in a paver patio, they can expect extreme durability, minimal maintenance and — you guessed it — added value to their home. According to Inman, a leading real estate news source, patio additions to homes (when done properly) can deliver a return on investment of anywhere between 30% to 60%.
Can I just lay pavers on dirt?
Lots of questions come up regarding how to lay pavers on dirt, however, it is not recommended to lay pavers directly on dirt or any unprepared ground. In order for pavers to look and perform their best in a permanent situation, the ground needs to be levelled, excavated and hard compacted.
Is it cheaper to build a deck or paver patio?
It's cheaper to build a concrete patio in terms of both the initial cost to lay a concrete patio, as well as its cost of maintenance over time. A concrete patio costs only $4 per square foot, while a deck costs roughly $6 per square foot for lower-cost pressure treated lumber.
How much does it cost to pour a 24x24 slab of concrete?
A typical 24x24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.
How much does a 20x20 concrete patio cost?
between $1,200 to $6,000A 20-foot by 20-foot concrete patio runs between $1,200 to $6,000, including labor and materials. Adding decorative finishes and colors could make the price even higher.
How much does a 10x10 concrete patio cost?
Concrete Patio Costs Per Square Foot On average, you'll spend $10 per square foot on a poured concrete patio. Although you'll average somewhere between $6 and $15 per square foot, you can pay anywhere from $4 to $30 per square foot.
Is patio worth the money?
So exactly how much does a deck increase the value of your home? Experts estimate that a deck offers a resale value of at least 76%, which is higher than just about any other home renovation project.
How long will a paver patio last?
Properly maintained, concrete paver driveways generally outlast poured concrete, which typically lasts about 20 to 30 years, compared to a possible 50 years for concrete pavers.
What brings down property value?
Closure of facilities – public services, employment, amenities; if any of these services close, it could impact the value of your house as they're often appealing to buyers. Low school ratings – buyers pay to live in areas with good schools because they want their children to have access to the best education.
How much does a paver patio cost?
Paver patios cost between $2,400 to $7,000, or an average of $3,400 nationally, and can boost your property value. A patio is an easy way to dress up a backyard and increase space for entertaining. Concrete is a classic choice, but for a unique, eye-catching patio, consider pavers.
How much does it cost to install pavers?
To purchase and install most pavers, expect to pay an average of $8 to $25 per square foot, according to HomeAdvisor. If you choose a high-end stone, the cost could rise to $50 per square foot. Preparing the ground to last a long time and installing the pavers is a time-intensive process.
How much does bluestone cost?
Usually, the stones are a much larger size than most common stone pavers, which gives them a smoother, less busy appearance. Due to their size and uniqueness, bluestone typically ranges between $18 and $24 per square foot, including installation. Pavestone is a tumbled concrete paver that can mimic the appearance of bluestone and costs only $0.50 to $3 each.
What is the cost of brick pavers?
A traditional red brick patio is an iconic look in some regions, but other colors like tan or gray can also be used. They range from $0.25 to $4 per brick or $4 to $8 per square foot.
How long do pavers last?
Paving stones are known for their ability to last—up to 50 years is not an unreasonable expectation, depending on stone choice. That’s longer than concrete, which tends to break down, settle, or crack much sooner. Paver patios do not need to be sanded and stained every year like a deck—just spray them with water when they get dirty.
What is the best material for a patio?
Gravel. Gravel is a less expensive option for a patio, yet it’s a high-maintenance choice. The ground will still need to be prepped to drain water and stabilize the gravel layer. Gravel is often used as a base material before some pavers are set, but it can work as the top layer if preferred.
How much does it cost to make concrete look like stone?
If you prefer concrete without the brick look and without the smooth concrete appearance, you could use patterned molds to make the concrete appear like stone (molds can cost between $15 and $100) or have the concrete stamped to look like faux wood or other intricate designs.
Cost Estimator by Size
It’s a simple rule of thumb: The larger your patio, the more expensive your project will be.
Other Factors That Affect Cost
Your paver patio project would be easy to plan if size was the only factor affecting costs. But there are many other factors to consider, such as the patio’s location, shape, and paver material.
Extra Services
Once you’ve installed your patio, you’ll likely be interested in further projects that highlight your patio’s design and add outdoor entertainment.
Cost of Paver Patios Across the U.S
All prices listed in this paver patio cost guide are national averages. Prices for materials and labor will vary depending on where you live. Delivery expenses might be higher, access to materials might be limited, and labor rates might be more competitive in your area.
DIY Paver Patio Installation
Paver patio installation isn’t an ideal home improvement project for DIY beginners. If you don’t have the necessary skills for paver patio installation, you risk making costly mistakes that may result in a skinny wallet. Hire a professional installer to get the best bang for your buck.
Conclusion
A paver patio opens the door to years of outdoor entertainment with family and friends. Lounge around by the pool, host a backyard dinner party, and cozy up by the fire pit.
About Us
LawnStarter is a startup making lawn care easy affordable and reliable. Follow this blog to stay tuned with what you need to keep your lawn in tip-top shape year-round.
Choosing a Design
Before you take efforts to install the patio, be sure to create a patio design that suits your home's style and your personal preferences. You'll need to determine the size and shape of your patio space, the material and shape of the pavers, and the layout pattern of the blocks.
How Are Paver Patios Installed?
Most paver patios are made of three basic layers: gravel, sand, and pavers. The gaps between the pavers are typically filled with sand for what's known as a dry installation, but some installers prefer to fill the gaps with mortar or grout depending on the material and the local climate.
Paver Patio Installation Costs
The average cost for a paver patio is around $3,400, with a typical price range of $1,900 to $7,000. A patio's specific price will vary dramatically based on the size, whether a contractor is hired, and the materials used. A typical cost range for materials and installation is between $8 and $25 per square foot.
Paver Material Cost Estimates
One of the biggest factors when it comes to the total cost of a paver patio is from what the pavers themselves are made. Whatever material you select, it's important to always order 10 percent more material than you need so you can account for broken pavers and wasted material from blocks you need to cut.
Who Installs Paver Patios?
When it comes to hiring someone to install your paver patio, your three best options are landscaping contractors, landscaping design companies, and brick contractors. In each of these cases, it's a good idea to ask the contractors how they plan to prepare the site and lay down the patio to make sure they will not be skipping any crucial steps.
How much does a paver patio cost?
The average paver patio costs $3,400. Projects typically range from $2,400 to $7,000 for a standard 280-square-foot patio, while complex installations can be $10,000 or more. You could pay anywhere from $8 to $50 per square foot, depending on the project’s size, labor, material, and design complexity. While functional, a concrete slab patio can ...
How much does it cost to lay pavers?
How much does it cost to have pavers installed? The labor cost alone to lay pavers is around $50 to $80 per hour or $4 to $11 per square foot. A 300-square-foot patio takes most professionals between 35 and 40 hours to complete.
How much does a brick paver cost?
By themselves, most brick pavers cost $4 to $8 per square foot. Concrete pavers cost $2 to $7 per square foot.
How long does it take to lay stone pavers?
If you’re handy around the house and don’t mind spending around 40 to 50 hours on a project, laying stone pavers is a relatively straightforward DIY task. Always call the dig line before you go to town with your spade, as there are gas lines, plumbing systems, and other underground obstacles you don’t want to hit.
Material Affects Cost
A couple of things will affect the overall cost of your backyard patio. Obviously, the size of the patio makes a difference but so does the difficulty of the job. Will you have the patio installed on a fairly flat surface, or will have the contractor and landscaper have to do a significant amount of surface preparation?
Pave Away
As you consider the cost of your paver patio, consider the long-term aesthetic you want to achieve. Then pick the paver that you can afford and that achieves this goal. Before you know it, you’ll have that beautiful oasis in the backyard, the perfect retreat spot to have a glass of wine or a bottle of beer after a long day’s work.
How much does a patio cost?
A professionally installed patio typically costs between $2,363 and $5,909, for an average price of $3,994. The national average for a professionally installed patio is around $3,994, but the average range starts around $2,363 and goes up to $5,909. This includes excavating the patio site, materials, materials delivery, ...
What are the two most important considerations when choosing patio materials?
Materials and square footage are probably the two most important considerations if you are trying to control your costs. Below are the average ranges for some of the most popular patio materials.
How often should I mowing my patio?
True, it doesn’t require weekly mowing or weeding, but you’ll need to evaluate your patio once or twice a year to keep it in good working order. Every six months or so, check to see if the regular or polymeric sand between your pavers is low. Keep the sand filled to a quarter inch below the pavers’ surface.
How much does it cost to install a fire pit?
The average fire pit installation costs about $750.
Is patio material heavy?
Think of it this way: Patio materials are heavy. Materials sourced further away will be more expensive, so if you are looking to cut costs, ask your contractor which materials are locally available.
Do you need to seal pavers?
Another aspect of patio maintenance is whether you want to seal your pavers. Most experts say it is not necessary, but they are quick to point out that it is very beneficial. Sealers help protect the pavers and the joint sand, reduce the chance of permanent staining, and help maintain the initial color.
Is a patio an affordable option?
Whether you are an avid DIYer or you want someone else to handle logistics and installation, a patio can be an affordable way to enjoy more sunshine and outdoor time with family and friends. Remember that the DIY option offers significant savings, but so does choosing the size of the patio and materials wisely.
How much does a patio cost?
Most patios fall between $10 and $15 a square foot for average materials. The more intricate the design or more labor-intensive the layout, the higher the costs.
How much does it cost to build a raised patio?
The cost to build a fully installed raised patio ranges from $2,160 to $6,696 for a 12’ x 18’ patio. On average, raised patios cost between $2 and $6 more a square foot than ground patios. A raised patio lifts the patio, sometimes with a retaining wall 2 at one end or one or two surrounding rows of concrete blocks. There are many reasons why you may want to add a raised patio, from a ground that is not level to wanting to eliminate a step from the house onto the patio. You can use the same patio materials for a raised patio. The difference is that it is slightly built up so that there is a step down from the patio to the ground. If your ground is not level, you may find the patio only needs to be “raised” with a short retaining wall section at one end, while the rest can sit on the elevated section of land.
How do I build a patio?
Additional Considerations and Costs 1 When planning your patio position, consider the sun exposure, particularly if you want to sunbathe. Choose a section with good sun exposure or a shady area for dining and relaxing if you live in a hot climate. 2 If you have shifting soil in your yard, consider using poured concrete because pavers are not the best option. 3 Patios do not have as high an ROI as decks or porches but historically have come in at around 55% in the last few years. 4 Due to drainage and water flow, do not install your patio in a low spot on your property. 5 When removing an old patio before installing a new one, add in additional labor costs. Most demolition costs an additional $5 a square foot.
What is a patio roof?
Patio roofs are a type of patio cover. Rather than a softcover like an awning, this is a permanent hardcover closely resembling a pavilion. These roofs can be made of many materials, with wood and aluminum being the two most common. You can also build a patio roof and shingle 11 it to resemble your home’s roof.
How much do solar lights cost?
The cost of solar lights for your patio ranges from $10 to $150. Solar lights are a great addition to patios because they do not require an electrical connection. Most can also be installed DIY, so there are no additional costs. The lights come in many varieties, from those attached to your home’s side or a pillar to those staked in the ground. Some solar lights can even be disguised as rocks so that you can hide them in your landscaping. Most solar lights come in groups so that you can purchase up to 10 at once and illuminate large areas in minutes.
How much does it cost to install a flagstone 5 patio?
The cost to install a flagstone 5 patio is $15 to $30 a square foot. Flagstones are large flat stone pieces. The stones’ shape and size are irregular. They must be individually fitted like a puzzle or mosaic on the patio. The joints between them must be larger to make up for the irregular edges.
How much does patio furniture cost?
Patio furniture costs between $200 and $2,000. Patio furniture comes in many forms. It can be inexpensive plastic chairs and table sets or have elaborate upholstered couches, chairs, and glass and metal tables. When choosing a patio set, keep several things in mind. The first is: who is using it? Families with young children might want to start with cheap items and invest in higher quality later. The next is: how often is it used and in what climate? Sturdier items used year-round cost more than things you might only bring out in the warmer months.
How much does a stone cost per square foot?
Typically, standard paving stones are priced from $2.53 to $3.69 per square foot, plus tax. Prices vary depending on the manufacturer, style, or texture that you choose. When installing pavers, you will have to account for wasted paving stones.
What materials are needed for pavers?
When considering the materials needed for a paver installation, you will be looking at the following: 1 Pavers 2 Class II Road Base 3 Geotextile Fabric 4 Bedding Sand 5 Concrete 6 Joint Sand
What is the difference between pavers and labor?
Labor. The one cost of any paver installation that will make the biggest difference is the quality of labor. This is where the saying “you get what you pay for” comes into effect If you are looking for a quality paver installation. For guaranteed quality, you should work with installers with the most experience.
How much does it cost to dump a 1,000 square foot driveway?
The price for each dirt load comes out to approximately $160 and $121 for each concrete load.
How much does geotextile fiber cost?
The cost of the fiber is roughly $0.37 per square foot (taxes included).
How much does it cost to install pavers?
The average cost to install pavers or build a paver patio is around $3,400 for a total of about 280 square feet. This cost can be as high as $7,000 if you're covering a large area or using high-end materials. It will also cost more if you have a complex job, need special features, or if you also want to have utilities like electricity or plumbing added to a patio area. Those jobs may cost you anywhere from $10,000 or even more.
How much does a brick paver cost?
Brick pavers cost around as little as $8 to as much as $25 per square foot installed. A palette of brick pavers will run about $300 to $700 each, with one palette covering an area of approximately 56 square feet. Depending on the material of your pavers, the price can vary greatly.
How can I make my garden look better?
You can make your garden look even better by adding a paver walkway. For a natural look, consider sandstone pavers to create a striking aesthetic in a garden. This material has an organic look and creates a beautiful aesthetic you can enjoy through your backyard or garden area. Light up your new paver walkway with small solar lights so you can walk around your yard or garden when the sun goes down .
How much does it cost to install pavers in zip code 23917?
For your project in zip code 23917 with these options, the cost to install pavers starts at $10.43-$13.98 per square foot. Your actual price will depend on job size, conditions, finish options you choose.
How much does slate cost?
Slate is another type of stone that can add a gorgeous element to your outdoor space. This material costs around $11 to $14 per square foot. If you love the look of slate but want something more versatile, look for concrete slate pavers instead. They come in a myriad of colors and are much more durable than natural slate, so they'll last much longer. Concrete slate pavers are less expensive than the real thing and run between $8 to $15 per square foot depending on the color and size.
Why do you need pavers?
Installing pavers can add a beautiful look to the exterior of your home and boost your curb appeal. They can also increase your resale value if you ever decide to sell your home. Unless there is special grading or other alterations that need to be made, installing pavers is a fairly easy process.
What is the difference between concrete and pavers?
When you compare a concrete slab to pavers, there are several distinct differences. First, concrete is much lower in cost per square foot than most types of pavers.
