Fireplace and Woodstove Repair Average Costs #
- A chimney sweep and inspection runs $150 to $300.
- Repairing cracks in a chimney flue costs $250 to $1,000; installation of a new flue liner costs $2,500 to $5,000.
- Simple repairs to a chimney crown can cost $500 to $1,000; more complex work (including rebuilding) can cost $1,000 to $2,500.
What is the average cost to repair a fireplace?
You need a professional to conduct the repairs when damage occurs to yours. The national cost average to repair a fireplace is between $200 and $1,000. Most homeowners pay around $600 to repoint a damaged section of a brick fireplace. Costs can be much higher or lower, depending on the problem and the amount of work required to fix it.
How much does refacing a fireplace cost?
Refacing a fireplace can cost about $1,100, but the final price will depend on the size of the fireplace and the materials used. If you want to keep your fireplace refacing price down, go with stucco, reclaimed wood or cheaper tiles such as ceramic or porcelain.
How much does it cost to install a gas fireplace?
While there are many factors that can affect the installation cost of a gas fireplace, on average, people spend $2,750 for a standard installation. If you are looking at converting a wood fireplace to a gas fireplace, this can range from anywhere between $500 – $2,500.
How to remodel existing fireplace?
Learning to DIY: How to Update a Fireplace on a Budget
- Add a touch of paint. Gone are the days of design elements such as bold and bright red fireplaces and natural, oak-colored wall paneling and trim.
- Turn your brick to stone. Tired of looking at the dingy, old brick eyesore smack dab in the middle of your living room? ...
- Add a mantel. ...
- Think — and build — outside the box. ...
- Accessorize, accessorize, accessorize. ...
How much does it cost to repair inside of a fireplace?
Fireplace Repair Cost by Fireplace TypeFireplace Fuel TypeAverage Cost Range to RepairGas$200 – $1,000Wood$160 – $2,500Electric$100 – $300Pellet$150 – $800
How much does it cost to repair a cracked fireplace?
However, issues can arise with them, including damaged surrounds and firebox cracks. You need a professional to conduct the repairs when damage occurs to yours. The national cost average to repair a fireplace is between $200 and $1,000....Fireplace Repair Cost.Cost to Fix FireplaceAverage range$200-$1,000Low-end$75High-end$7,0001 more row•Sep 13, 2021
Can a cracked fireplace be repaired?
You can repair most cracks if caught early by sealing or chiseling away the damaged areas and repointing. However, if you wait too long, you run the risk of needing a complete rebuild of your firebox, which is time-consuming and expensive.
How much does it cost to fix a pilot light in a fireplace?
If you need your pilot light fixed, most professionals will complete the repair for about $150, on average. When replacing a thermocouple or thermopile with the help of a professional, you can expect to pay between $150 and $250.
How much does it cost to replace a wood fireplace?
Wood stove installation costs between $3,000 to $4,000 on average, not counting the price of the stove, and costs will vary depending on the height of the stovepipe and whether a flue can be updated or must be newly installed.
How do you fix a fireplace firebox?
0:563:39Firebox Repairs - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd round the mortar joints back to about a half of an inch to an inch. The new moist. And weMoreAnd round the mortar joints back to about a half of an inch to an inch. The new moist. And we moisten all the mortar joints. So you get a good bond. And then basically use high-temperature cement.
Is it bad to have a crack in your fireplace?
Cracks and damage in the firebox can be a serious hazard if not addressed immediately. The high heat that exists in the firebox itself can transfer through cracks and damage structural materials in your home. This can also risk fire and allow carbon monoxide intrusion.
What does a crack in the fireplace mean?
As we said earlier, cracks in firebox are common and they are a sign of damage to the joints between the bricks found in your firebox. The reason for this damage is the heating and cooling that comes from burning wood and that causes the mortar between the firebricks to crack.
How do you repair a brick fireplace?
Using a trowel, apply fire cement to the damaged area. If the brick has broken in more than one spot, put a layer of cement along the edge of each break and firmly push the pieces back together. Clean off any excess cement. If you are repairing a crack, push the cement into the crack and remove the excess.
What would cause a fireplace pilot light to go out?
Some of the possible serious reasons for pilot lights to go out include loose or broken gas valves, thermocouples or heat exchangers, faulty venting, low gas pressure, or high winds. If you believe there is a serious problem, don't hesitate to contact a professional.
What happens if pilot light goes out on gas fireplace?
A pilot light may need to be re-lit from time to time after being extinguished on purpose or by accident. If it is accidentally extinguished, there exists a danger that the gas used to keep the flame lit will continue to vent, possibly into the living space.
Is it OK to leave pilot light on gas fireplace?
We recommend that you turn off your gas fireplace pilot light seasonally. Turning off your gas fireplace's pilot light can save a substantial amount of energy and money. It is important to remember that not all gas fireplaces have “standing” pilot light, or, a pilot light that is “always on”.
Can I replace my fireplace insert?
Yes, fireplace inserts can be replaced by simply swapping out the old insert and installing a new model. It's best to have help when performing this project, however, as it can be fairly laborious. Here are the steps to replace your fireplace insert: Turn off the electricity and gas.
How much does a firebox cost?
For $1,000 to $2,000, you can purchase a new firebox and cover its installation costs. In some cases, the cost of labor, permits, and inspections may also fall within this price range, but it depends on your fireplace design.
How do you restore an old fireplace?
6:139:22How to Restore a Historic Fireplace | Ask This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo bob one of the big problems that we have when we're trying to restore a fireplace like this isMoreSo bob one of the big problems that we have when we're trying to restore a fireplace like this is the joints. Can you see how thin that is yes normal joints for us are about 3 8 of an inch.
How do you repair fireplace mortar?
InstructionsRemove the Loose Mortar. Remove the fire grate from the fireplace and use a fireplace brush and dustpan to sweep out the firebox. ... Clean the Mortar Joints. ... Fill the Joints With Caulk. ... Smooth the Caulked Joints. ... Cure the Caulk.
How do I repair the inside of my fireplace?
It depends on the damage. Crumbling sections of mortar can be removed and replaced, and cracks can be caulked. It is best to contact a professional...
How do I fix a crack in my fireplace?
It depends on the material. Cracks in a brick unit can be patched, while cracks in the mortar must be repointed. Cracks in other materials like met...
How do I clean the grout on my brick fireplace?
You can use commercial grout cleaners or homemade solutions using ingredients like dish soap, vinegar, and water to clean grout on a brick unit. Us...
What to do when there is no fire in the fireplace?
Many reasons could explain why you cannot start a fire. It could be a dirty chimney, drafting problem, faulty or closed damper, or a damaged ignite...
When should I replace my fireplace?
They last from 10 to 40 years. The lifespan depends on the materials and type. It is best to replace them when they get old or suffer extensive dam...
What happens if the pilot light goes out on a gas fireplace?
If the pilot light goes out, you may simply be able to follow the instructions and relight it. If it does not work or you have concerns, contact pr...
Do plumbers fix gas fireplaces?
Yes, plumbers can help with gas-related issues and often have qualifications and experience with gas units. Check that you work with a licensed and...
How often should a gas fireplace be serviced?
If the gas unit is in regular use, it should be serviced by a professional every year. This prevents big problems from growing.
How much does it cost to patch a fireplace?
The cost to patch a hole in a fireplace floor averages $150 and $600. Holes may appear on the floor from impacts or accidents. Fix them promptly because the materials under the hole may be less resistant to heat and could be damaged if left exposed for too long. Holes are usually patched or filled with mortar.
How much does it cost to fix a fireplace glass?
Fixing a fireplace glass ranges from $85 to $150. Many models have glass screens at the front, which can get damaged and suffer superficial cracks from accidents or impacts. In most cases, damaged glass must be replaced, but it may be possible for a professional to fix a small crack by filling it with resin.
How much does it cost to fix a firebox?
Homeowners pay between $150 and $800 to have a metal firebox fixed. The firebox is essentially the chamber in the center containing the fire. Metal fireboxes are common and well-known for their durability, but they can wear and suffer damages like cracks, warping, pitting, and rust if exposed to excess moisture. So, they can require many forms of repair like cleaning and restoration.
How much does it cost to replace a fireplace screen?
The cost of fireplace screen replacement averages $75 to $350. The total cost depends on the screen size and material because you can find cheap and simple mesh screens or more elaborate and detailed screens made of other materials. Screens are positioned in front and protect your floors and furnishings from stray sparks or ash.
How much does it cost to repair a limestone fireplace?
The cost of limestone 10 fireplace repairs averages $250 to $800. Limestone is a very attractive and strong material for a surround, but accidents and other incidents cause damages like cracks and chips. You may need to call a professional to fill in cracks or chipped sections.
How much does a chimney inspection cost?
Usually, they inspect all key areas, looking for holes, cracks, leaks, masonry weaknesses, or other problems. They may also inspect the chimney as part of the service, looking for any creosote build-up or other issues inside like cracks, holes, and weaknesses, usually with a camera. Chimney inspections usually have different levels, with higher levels reserved for more complex chimneys. Call a professional chimney inspection specialist to choose the right level inspection for your home. The national average to inspect a chimney is $300 to $600. Most homeowners pay around $450 for a level-2 inspection with cleaning for two flues.
How much does it cost to fix an ethanol stove?
Homeowners pay between $150 and $850 to fix their ethanol unit. This type is becoming increasingly popular because it uses clean-burning ethanol and does not need a chimney. It does not usually need as much maintenance as a traditional wood-burning chimney but can still suffer cracks, dents, and holes.
How much does it cost to repair a gas fireplace?
Natural gas pipes are the lifeline for gas fireplaces. If there is a problem with the gas line, a plumber can fix it, at an hourly cost of $50 to $200. The most expensive part of a gas fireplace is its insert. Insert plus installation and venting can range from $1,500 to $4,500. Since the cost of installing a new gas fireplace to an existing gas line runs from $6,000 to $8,000, this can be considered the top range for repairing the units, as well.
What is a gas fireplace?
Gas fireplaces have supplanted wood-burning fireplaces as the fireplace of choice in most homes built or remodeled today. These fireplaces draw natural gas that may already be used in other parts of the home for the water heater or kitchen stove. Gas pipes run into a firebox with an insert of flame-proof artificial logs. Flames curl around the logs in a designed shape and spread. There is no need to strike a match since most gas fireplaces ignite with a switch. Since the fireplace produces no ashes, clean-up is minimal.
How long has Lee been remodeling?
Lee has over two decades of hands-on experience remodeling, fixing, and improving homes, and has been providing home improvement advice for over 12 years.
Is a gel fuel fireplace good?
If you want to get your fireplace up and running fast, and for little money, a gel fuel fireplace is a good choice. Ethanol or alcohol gel fuel fireplaces are clean-burning and apartment-friendly. Gel fuel fireplaces' condensed flames dance in a low, orderly fashion—the direct opposite of the raging, chaotic flames of wood fireplaces.
Do gas fireplaces have ashes?
There is no need to strike a match since most gas fireplaces ignite with a switch. Since the fireplace produces no ashes, clean-up is minimal.
Do fireplaces need to be repaired?
But because fireplaces do a lot of work, they bear more than their share of maintenance issues. Heat and smoke deal out a great burden of abuse to fireplaces, so occasional repairs are an expected component of owning a fireplace. Fireplace repair costs can vary because the types of fireplaces can vary greatly— gas fireplaces, traditional wood-burning fireplaces, or gel fuel fireplaces .
Can a mason repair a wood burning fireplace?
Wood-burning fireplaces may require the services of an experienced mason for firebox repointing and rebuilding. Any loose bricks or mortar should be addressed immediately as they can lead to fires. Chimneys above the roofline that are eroding, too, should be repaired by a mason.
How Much Does It Cost to Repair a Fireplace Near You?
Fireplace repair costs vary by area and could be higher or lower than the national average:
How Much Does It Cost to Repair a Fireplace Yourself?
A fireplace repair might seem like a good way to save a little money for the savvy DIY homeowner. Some fireplace repairs can be straightforward and simple to DIY, but it’s best to contact a fireplace repair professional for other repairs.
Fireplace Repair Cost Breakdown
The end cost of a professional fireplace repair doesn't just depend on your location; the part of the fireplace that needs repair can also impact the final bill.
What Factors Impact the Cost of Fireplace Repair?
The total price to have your fireplace repaired can vary based on these factors:
Why is it important to have a gas fireplace inspected?
Inspections are important in order to ensure that the gas fireplace is functioning properly and is not a safety hazard.
What are some signs that a gas fireplace needs to be repaired?
Some signs that a gas fireplace needs to be repaired include yellow or orange flames soot buildup and strange noises.
Can a gas fireplace be repaired by a homeowner?
It is not recommended that homeowners attempt to repair a gas fireplace themselves as it can be dangerous.
How long does a typical gas fireplace repair take?
A typical gas fireplace repair can take anywhere from a few hours to a few days.
What is involved in a gas fireplace tune-up?
A gas fireplace tune-up typically includes an inspection and cleaning of the gas fireplace.
Can a gas fireplace be repaired without a professional?
It is not recommended to attempt to repair a gas fireplace without a professional as it can be dangerous.
What are the dangers of repairing a gas fireplace without a professional?
The dangers of repairing a gas fireplace without a professional include the risk of explosion fire and carbon monoxide poisoning.
How much does it cost to replace a chimney?
If major components of the chimney need to be replaced or rebuilt from scratch, the cost can be between $1000 and $8000. The cost can go up and come down according to features of your fireplace, the make of it, the materials and the design used, and the placement and the height of the chimney.
Why is it important to get your fireplace and chimney repaired?
Why it is important to get your fireplace and chimney repaired from a professional Masonry company. A fireplace, understandably, might easily be the most comforting place in your house or property, especially when its freezing cold outside.
What factors affect the cost of a chimney repair?
Another factor that may have a bearing on the cost of repair is the part of the fireplace or the chimney that needs the most attention and the height of the chimney.
What happens when you burn wood in a fireplace?
When wood is burned, creosote gets deposited inside the chimney lining. It is a sort of deposit that rises from the burning wood and gets settled within the smoke chamber and the blockage of the chimney flue.
What happens if a chimney doesn't catch fire?
Even if it doesn’t catch fire, it chokes up the ventilation and may fill your room or apartment with toxic smoke, endangering the lives of your loved ones. The cost of fireplace and chimney repair and maintenance compared to the cost of the safety of your family is nothing.
Why does my chimney blockage?
Sometimes birds and small animals build their nests inside your chimney because of the warmth it provides .
Why do chimneys and fireplaces have problems?
Most of the fireplace and chimney related problems originate due to prolonged neglect.
How much does it cost to reface a fireplace?
It will cost you between $300 and $6,000 to reface a fireplace. The price depends on if you do it yourself, or hire a professional to install it. Customized stonework will cost an additional $50 to $100 per square foot and does not include any extras like enlarged mantles, or fireplace doors.
How much does a firebox cost to replace?
A firebox is typically made of some kind of stone and can range from $160 to $3,500 or more. It depends on what type of stone is used.
What is Your Existing Fireplace Made of?
A fireplace can be made of many different materials including metal, wood, stone, tile, glass, and brick. Taking apart and disposing of your old fireplace materials can cost quite a bit too. That is because you will likely have to hire a demolition laborer for that job. The average cost for removal of a standard fireplace is about $500 to $1,000.
What is the name of the shelf above a fireplace?
It is important to know the name and what each of the components are. These include the: Mantel is the shelf above the fireplace. Surround is the area around the fireplace. Firebox is the space where you burn the wood. Hearth extension is the ledge under the firebox.
What is a fireplace hearth made of?
Your fireplace hearth is another major part of the looks as well as functionality and safety. Most hearths are made of brick, stone, or concrete. However, they may also be made of tile, steel, slate, marble, or granite.
How much does a marble mantel cost?
The cost for a marble mantel ranges from $750 to $11,500. But because of how heavy it is, you may have to pay extra to beef up your foundation to handle the weight. Metal: Different types of metal such as stainless steel or brushed metal add a unique touch of bling to any fireplace.
What is the best place to put pictures on a fireplace?
Mantel . The mantel is one of the major eye-catchers of your fireplace. This is because it is right at eye-level and typically holds family photos, mementos, and other decorative items. The cost of the installation of a mantel is fairly cheap. In fact, you can usually do it yourself.
Types of Repairs Vs Pricing
When it comes to chimney and fireplace repairs, the most common is creosote buildup, chimney cap damage, as well as blockage of chimney airways due to debris accumulation.
Flue Repair
When a chimney flue is discovered to be having issues, repairs will cost around $200 for a single flue tile.
Crown Repair
When cracks appear on your chimney crown, they’ll need to be fixed urgently to prevent moisture or water from getting in. Depending on the degree or extent of damage and the repair supplies needed, chimney crown replacement costs may range from $220 to $2,000.
Fixing Leaks
Chimney leaks could happen unexpectedly and cause extensive damage to a chimney structure.
Leaning Chimney
Leaning chimneys are considered significant problems as they arise from structural imbalance. Such tilts may be due to issues with the foundation. The cost of repairs is quite significant at $3,000.
Chimney Cracks
With time, chimney masonry joints as well as other parts of the chimney are likely to get cracked due to stress.
Chimney Parging
Parging the smoke chamber of a chimney refers to it being coated with mortar. This serves as insulation and also seals up holes and cracks. The cost for this procedure ranges from $1,000 to $2,000.
How much does it cost to replace a firebox?
Are you looking to start from scratch and replace your firebox? A complete re-installation will cost between $1,500 to $2,500, with additional costs to attach all of the related parts of the fireplace.
How Much Does It Cost to Repair a Firebox by the Type of the Repair?
As for prefabricated fireboxes, you can expect issues after just 10 to 15 years , especially if they were used too often.
What Kind of Firebox Repairs Can I Get on My Budget?
If your firebox needs to be fixed, how do you prepare your budget for the necessary work? Here are some common price ranges to expect for firebox repair and new installations.
What Factors Influence the Cost to Repair or Replace a Firebox?
If you have an older and more complex fireplace design, the cost to repair your firebox will be more expensive than the price of repairing a firebox in a newer, less complicated fireplace. For example, if you have a grand stone-stacked fireplace in a Victorian home, you may need a restoration specialist to accurately repair or replace your firebox. On the other hand, small and simple prefabricated fireplaces that were installed within the past decade could be an easy and less expensive repair.
How Much Do Fireboxes Cost to Install in Each Type of Fireplace?
When it comes to estimating the cost of installing a new firebox, the price will differ based on the type of fireplace. Not only do the different materials affect the price, but experts will also charge you based on the complexity of your fireplace system.
How do I find the right chimney expert?
When searching for the right chimney expert to handle your firebox repairs or replacement, always ensure that your chimney sweep is CSIA-certified. In addition, make sure that your prospective chimney expert offers customer testimonials and lists proof of their qualifications online. Before work on your firebox begins, ask for proof of liability insurance and request written documentation of your price quote.
What is a firebox in masonry?
Masonry fireboxes are hand-laid with firebrick and fire-resistant mortar. Prefabricated fireboxes include a metal panel that’s built to fit your chimney, which is also typically lined with metal.
How much does it cost to repair a gas fireplace?
Repairing a gas fireplace typically costs between $174 and $895. Most homeowners pay between $160 to $820 for general fireplace repairs (regardless of fuel type) but prices could range from $90 all the way to $2,000 on the high end.
How much does it cost to replace a fireplace panel?
Replacing a fireplace panel runs between $180 to $250 including labor. Expect to pay $360 to $750 if replacing multiple panels.
What to do if water is in my fireplace?
If you notice water in your fireplace, smoke not filtering through the chimney or any other oddity , stop using your fireplace and call a professional. These could be signs of hazardous issues. How much you pay to fix these issues depends on the type of repair it needs.
How much does it cost to clean a chimney?
Chimney sweeping costs $130 to $375 and is necessary to reduce the risk of fire. Fires can occur when a buildup called creosote gets too thick. Burning a log releases creosote resin which collects in your chimney. Creosote resin is highly flammable and becomes dangerous when it builds up (an eighth of an inch or thicker). Hire a professional to clean out this resin to protect your home from a fire.
How much does a pellet stove cost?
Gas fireplaces are more expensive than electric or wood-burning fireplaces. A pellet stove costs just $35 to $45 per month to run, which is cheaper than a gas fireplace.
Can creosote cause cracks in a firebox?
The acidic combination of water and creosote can also cause a breakdown of the materials. Metal fireboxes don’t usually crack, but the creosote/water compound can cause rust and deterioration. Outdoor fireplaces are most prone to weather damage.
Can a gas plumber fix a fireplace?
Natural gas plumbers can fix fireplaces, but most fireplace repair companies offer similar services regardless of the fire fuel type.
