Full Answer
Q. What type of grout is best for pebble tile?
For our normal sized pebble, sliced pebbles and mosaic tiles we recommend using a sanded grout. The mini pebble tiles would require an un-sanded versi...
Q. When installing the mosaics in the thin set how do you prevent the thin set from oozing up between the tiles thus preventing space for the grout?
We recommend using a thin trowel for the quickset and only lightly pushing the pebble tile into the thinset to prevent any oozing of the mastic....
Q. Do your glazed and polished pebbles still need to be sealed?
We do recommend sealing all of our products after the grout has been applied. This last step serves to protect the grout and offers an additional laye...
Q. Is there any way to protect the mosaic tile during grouting to minimize the cleaning afterwards. I have to polish every stone after grouting...what am I doing wrong?
The best thing to do is seal the stones prior to grouting. This allows the grout to come off more easily... Only our Natural finish tile needs to be s...
Q. Before I purchase, I want to know whether pebble tile is safe for outdoor use?
Yes! Outdoor spaces are great for our product. We have lots of examples of exterior usages in our photo gallery!...
Q. How much grout do I need per square foot of Pebble Tile?
In general you will need about two pounds of grout per square foot of our regular sized pebble tile. Just be sure to check that the grout you're using...
Q. Which products are suitable for a shower application?
All of our stone products are perfectly suitable for shower applications including the glazed pebble tile, polished pebble tile etc. Because of the te...
How thick should grout be for pebble tile?
Since pebble tiles can vary in height from 1/4 to 1/2 an inch , you’ll want to make sure the grout is thick enough to fill in all of the cracks between the pebbles. Most of the pebbles will be covered at this point. Since this was a 36″ square floor, I put the grout on the whole floor all at the same time.
How tall is a pebble tile?
Since pebble tiles can vary in height from 1/4 to 1/2 an inch, you’ll want to make sure the grout is thick enough to fill in all of the cracks between the pebbles.
What kind of tile is used in glass tile oasis?
After looking through the many products that Glass Tile Oasis has, we picked the Onyx Black Pebbles and Stones Natural Tile for the floor to compliment the simple gray tile we had already purchased for the walls and bench. I went with pebble tiles to bring a little bit of a spa feel to the space.
What is grout boost?
Grout Boost – This is the liquid you mix with the grout instead of water so you don’t have to seal the grout.
Can you leave grout on pebble tiles?
Repeat this many times until you remove as much grout as you’d like for the floor to look. For pebble tiles, you can leave most of the grout and clean off the highest surfaces. That way when the grout dries, it will feel comfortable on your feet, not bumpy.
Can you buff pebble tile?
For pebble tiles, you can leave most of the grout and clean off the highest surfaces. That way when the grout dries, it will feel comfortable on your feet, not bumpy. Don’t forget to wipe off any excess grout from the walls. Once the grout dries, you can buff the tiles with a dry cloth.
Can you use non sanded grout on tile?
The grout spaces are way to large to warrant that. Sanded grout has larger bits of aggregate in it to hold the grout in place in larger spaces. Non-sanded should be used for space under 1/8″ or for tiles that are prone to scratching (glass, i.e.) You might have issues down the road.
How much grout do I need?
At this stage, you should already know the following measurements, which will help you calculate how much grout you need:
How to remove grout residue from a tile floor?
Wipe away leftover grout and lift residue with sponge.
What is grouting on tile?
Grouting creates a seal around your tiles, providing a watertight barrier and protecting your walls and floors from moisture. It’s one of the best parts of the tiling process, as it means your task is nearly complete, leaving you with a clean and professional-looking finish. In this article, we’ll show you how to grout your tiles ...
How long does it take for FlexJoint Premium grout to dry?
Suitable for use with underfloor heating systems, UltraTile FlexJoint Premium grout dries within 15 minutes (regular ceramic tiles), leaving you with a clean and stylish surface.
What is Ultratile Flexjoint grout?
One of the leading names in tiling, UltraTile FlexJoint Premium grout has been specially designed for areas where vibration and movement occur, available in a variety of different colours to meet your needs. Plus, with a stain and mould-resistant formula, you’ll find this water-repellent grout is easy to clean and maintain.
How to avoid powder?
Pour the required amount of water into your bucket first to avoid unmixed powder. Make sure you are wearing appropriate protective clothing, including gloves, eyewear and a face mask. The cement-based powder can cause irritation. Pour the recommended amount of powder into the bucket.