Standard Application Rates: For easy spot treatments, apply Cutrine Plus Granular directly over infested area at the rate of 1 pound per 720 square feet (72' X 10'). Large areas should be treated at the rate of 60 pounds per surface acre (208' X 208').
What is the application rate for cutrine plus?
Application Rate for Cutrine Plus: 1.8 gal treats 1 acre-foot of water for medium density string algae (Treats approx 8,000 sq ft in 3 ft of water) 1 acre-foot = 1 acre of water, 1 foot deep. For example: A 1 acre pond with an average depth of 6 feet contains 6 acre-feet of water.
How much cutrine plus do I need for a pond?
For typical algae applications, 1 gallon of Cutrine Plus can treat 1.5 acre-feet of water. So if you have a 6 acre pond, you would need 4 gallons of Cutrine Plus. Step 2: Dilute the required amount of Cutrine with the right amount of water to ensure an even application is distributed.
How do you use cutrine Plus on algae?
For Filamentous and Planktonic Algae, use 1 gallon of Cutrine-Plus Liquid per 1.5 acre-ft of treated water. For Chara, use 2 gallons of Cutrine-Plus Liquid per 1.5 acre-ft. of treated water. Dilute with a minimum of 9 parts water. Spray uniformly over the water surface as a rain of coarse droplets.
How much cutrine do I put on my lawn?
CUTRINE®-PLUS- is applied at a rate of 0.6 gallon per acre-foot (43,560 cubic feet) of water to be treated for planktonic and filamentous algae, 1.2 gallons per acre-foot for Chara and Nitella and 1.2 to 3.0 gallons per acre-foot for Hydrilla.
How much does Cutrine cost?
How much is Citrine worth? The value of Citrine gemstone is dependent upon numerous factors including its color, clarity, cut, carat weight and place of origin. The most highly prized Citrine gemstone bear deep yellow hue and high transparency. Such pieces usually cost around Rs 400 per carat ($6 approx.)
How much algaecide do I need for 1 acre pond?
You will use 1. 5-2 gallons per surface acre of pond.
How do you apply Cutrine plus to a pond?
Apply Cutrine Plus Liquid Algaecide with a sprayer at a rate of 0.6 to 1.2 gallons per acre foot of water when algae begins to grow and water is over 60°F. Dilute 1 part Cutrine Plus to 9 parts water and spray as evenly as is practicable over the surface of the water. Warning!
How do you mix Cutrine Plus with water?
Tank mix 3 gallons of CUTRINE-PLUS® with 2 gallons of HARVESTER®. Ap- ply mixture at the rate of 5 gallons per surface acre. Dilute with at least 9 parts water and apply as a surface spray or underwater injection. Observe all cautions and restrictions on the labels of both products used in this mixture.
What is the mix ratio for Cutrine plus?
Mix Cutrine Plus with enough water to ensure and even application. When using a backpack sprayer or handheld pump sprayer mix 1 gallon of Cutrine Plus to 9 gallons of water. When using a professional skid sprayer or power sprayer, use a 50:1 ratio. For more specific application rates please refer to the label.
How long does Cutrine plus take to work?
Cutrine-Plus is hard water stable. Far less corrosive than other common algaecides. Begins to work immediately on contact to break down algaes cellular structure. Controls Planktonic Algae in 1 to 2 days, Filamentous Algae in 3 to 4 days.
Does Cutrine plus need a surfactant?
Answer: Cutrine Plus Algaecide does not require you to add a surfactant.
How can I make my pond blue?
0:245:49How to Dye a Pond for $20 - Reduce Algae and Weed Growth - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd it gets deeper as you get to the far side of the pond. And you can see it has kind of a greenMoreAnd it gets deeper as you get to the far side of the pond. And you can see it has kind of a green color to it. Um i did dye it this was about um two and a half three months ago that i dyed it once.
How do you get rid of algae in a big pond?
You can use a pond or garden rake to remove as much surface algae as possible. If your pond is too large, begin by using a chemical algaecide. There are a number of quality algaecides available that will provide almost immediate relief for an out-of-control algae situation when properly applied to your pond.
Can you mix diquat and Cutrine plus?
Diquat mixed with Cutrine Plus and a surfactant will kill pretty much any vegetation and algae that it is sprayed directly on. That is a great combination for treating areas with many different types of vegetation and algae!
Is Cutrine plus copper sulfate?
Since then and over the last 30 years or so, a chelated (chemically locked in) copper compound was formulated called Cutrine-Plus(available in liquid or granular). The product is far superior to copper sulfate in that it provides a longer contact (killing) time due to its stability to work in alkaline waters.
Who makes Cutrine plus?
Cutrine Plus | SePRO Corporation.
How many gallons of algaecide do I need?
Pool Algaecide: Initial Dosage: 12 oz. per 10000 gallons. Maintenance Dosage: 3 oz. per 10000 gallons, weekly.
What happens if you put too much algaecide in a pond?
If you use too much, it can deplete the levels of oxygen in your pond, causing plants and fish to die. When using algaecide, remember that aeration is needed to keep your fish alive while the chemicals are working.
When should I add algaecide to my pond?
Green Clean Algaecide for Koi PondsRecommended Application Rate: 1lb treats 1,000 gallons of water.Apply in the morning hours of a calm sunny day when water temperatures are at least 50˚ F or warmer.Turn off water circulations pumps (for waterfalls or streams)Apply product to algae covered rocks or streams.More items...•
How long does it take algaecide to work in a pond?
After treating one section, you can wait 7-10 days for the water to re-balance and determine if a second treatment is required. If it is, treat the second section and repeat the process until algae is under control.
How effective is Cutrine Plus?
Effective on Hydrilla when combined with Harvester Liquid. Cutrine-Plus Liquid is hard water stable. Far less corrosive than other common algaecides. Begins to work immediately on contact to break down algae's cellular structure. Controls Planktonic Algae in 1 to 2 days, Filamentous Algae in 3 to 4 days.
How much cutrine plus to use for hydrilla?
For Hydrilla, use 2 gallons of Harvester Liquid mixed with 3 gallons of Cutrine-Plus Liquid per 1 acre to be treated. Dilute mixture with a minimum of 9 parts water and apply as a surface spray or by underwater injection. Add Cygnet-Plus Liquid to increase penetration and contact.
What is Cutrine Plus Liquid?
Cutrine-Plus Liquid is ideal for treating surface growth of Planktonic Algae and floating mats of Filamentous Algae.
How much cutrine plus liquid to use for algae?
For Filamentous and Planktonic Algae, use 1 gallon of Cutrine-Plus Liquid per 1.5 acre-ft of treated water. For Chara, use 2 gallons of Cutrine-Plus Liquid per 1.5 acre-ft. of treated water. Dilute with a minimum of 9 parts water.
Is cutrine plus toxic to fish?
Cutrine- Plus Liquid may be toxic to Trout if carbonate hardness of treated water is less than 50 ppm. Most surface waters exceed this limit and pose no threat. If in doubt, use the Water Hardness Test Strips. Do not use in water containing Koi or hybrid goldfish.
How to use Cutrine Plus Liquid
Dilution rate for Cutrine Plus is 9:1. For 1 gal of Cutrine, mix 9 gal water. For 1 qt Cutrine, mix 2.25 gal water. Spray directly on affected areas. 3 gallon Sprayer sold here
When is the best time for treatment of algae?
Cutrine Plus works best when applied to water that is above 60 degrees. Treat early on a clear sunny day for best results.
Application Rate for Cutrine Plus
1 acre-foot = 1 acre of water, 1 foot deep. For example: A 1 acre pond with an average depth of 6 feet contains 6 acre-feet of water.
Will this kill my pond scum?
A number of vegetation types fall into the category of pond scum. Not all surface films are algaes. Here is a helpful source to determine what your "scum" is-
How much water is used for CUTRINE?
CUTRINE®-PLUS- is applied at a rate of 0.6 gallon per acre-foot (43,560 cubic feet) of water to be treated for planktonic and filamentous algae, 1.2 gallons per acre-foot for Chara and Nitella and 1.2 to 3.0 gallons per acre-foot for Hydrilla.
How many gallons of cutrine is in a hydrilla?
Hydrilla can be treated by surface spray or underwater injection. CONTAINER SIZES: CUTRINE®-PLUS is available in 1 gallon ( packed 4 to a case), 2 1/2 gallon (packed 2 to a case), 5 gallon, 30 gallon, 55 gallon and 275 gallon containers. NOTE:
What is the best algaecide for fish?
OF SPECIAL INTEREST: CUTRINE®-PLUS has proven to be the favorite algaecide for fish growers because they can calculate and apply the exact amount of copper they desire. It can reduce or eliminate taste and odor problems caused by geosmin and MIB producing blue-green algae.
What is CUTRINE PLAS?
CUTRINE®-PLUS is U.S.E.P.A. registered for use in drinking water reservoirs, farm fish and industrial ponds, golf course water hazards, lakes, fish hatcheries and raceways, irrigation water conveyance systems such as canals, laterals and ditches.
Is CUTRINE treated water corrosive?
CUTRINE®-PLUS is far less corrosive to equipment and other metal surfaces than other chelated copper compounds. CUTRINE®-PLUS treated water can be used for swimming, domestic uses and livestock watering immediately after chemical application.
Is cutrine good for trout?
CUTRINE®-PLUS need sunlight to optimize effectiveness. CUTRINE®-PLUS is not completely effective against Pithophora and diatoms. CUTRINE®-PLUS can be toxic to trout, at the recommended application rates, if the water has less than 50 ppm of carbonate hardness (soft water). OF SPECIAL INTEREST:
