Is it more expensive to repair or replace a flexplate?
The cost of repairing a flexplate or replacing it also takes a similar amount of time and has similar labor costs, but the only difference here is the cost of parts. As flexplates are used in the latest automatic transmission vehicles, they are quite complex and more expensive as they require more effort.
How do you repair a broken flexplate?
[Labor & Parts] Repairing a broken flexplate is one of the most complex procedures in car repairs. The main reason for this is that this flexplate resides inside a complex system of parts. You have to disassemble the parts, repair the flexplates, or replace them and reassemble that entire part once again.
What happens if your flex plate goes bad?
Because your flex plate transmits the power from your engine to your transmission, your ability to control your vehicle’s power can be affected. A bad flex plate could potentially cause a loss of power to the wheels and result in an accident. Many factors can cause wear to and deterioration of your flex plate.
What is a flex plate and how does it work?
In general, the flex plate and the torque convertor work together to smooth out the flow of power from your engine to your transmission. If your car has an automatic transmission, it most likely has a flex plate.
How to fix a bad flex plate?
What is a flex plate?
Why is my Flex Plate failing?
How to tell if flex plate is bad?
Can a bad flex plate cause an accident?
Does a manual transmission have a flex plate?
See 3 more
About this website
How much does it cost to change flex plate?
The average cost to repair a flexplate is $1495. This price includes 12 hours of labor at $100 per hour. The actual flexplate cost between $50 to $200.
Can I drive with a cracked flexplate?
No, you cannot drive with a broken flex plate in your car. The flexplate is what connects the engine to the transmission, and without it, your car won't be able to move. So if you have a broken flex plate, you'll need to get it fixed before you can drive again.
How do I know if my flex plate is bad?
Symptoms of a bad flex plateClunking, grinding, chirping, or rattling noises from rear of engine when engine is idling.Knocking noise when engine is shifted into drive or reverse.Heavy vibrations felt through the driver's seat when driving at normal speeds.Rough-running engine.Loss of power at higher speeds.More items...•
What causes a flexplate to fail?
Aside from a manufacturing defect, the only things that will cause a cracked flex plate are improper torque on the plate bolts at the crank and torque converter and the most common cause of transmission to engine misalignment; sometimes caused by missing alignment dowel pins that mate the transmission to the engine.
How long does it take to change a flexplate?
This means that to replace a flexplate, mechanics would need to take out the entire transmission system. If that's not hard work, what is? The entire operation can take anywhere from 6-8 hours. And most mechanics have an hourly rate of about $90-$110.
Is a flexplate the same as a flywheel?
Flexplates are generally much thinner and lighter than flywheels due to the smooth coupling action of the torque converter and the elimination of the clutch surface. Like flywheels, flexplates normally handle coupling to the starter motor, via teeth cut along the outer edge of the plate.
Is the flexplate part of the transmission?
0:253:03How Flexplates Work vs Flywheel - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne flex plate from one engine may not necessarily work on another that is otherwise identical allMoreOne flex plate from one engine may not necessarily work on another that is otherwise identical all automatic transmission vehicles have flex plates.
What does a warped flexplate sound like?
Warped flexplate can make metal-to-metal contact with inspection plate cover, or starter drive mechanism, and can make knocking noise as well when vehicle is put into forward or reverse gear.
Can you drive with a damaged flywheel?
It is possible to drive with a bad flywheel if the damage is minor. However, this does not mean that it is advisable to do so. The fault could lead to more serious damage affecting the clutch components, crankshaft, and engine itself. You will feel more engine vibrations and it will affect its overall performance.
Where is the flex plate located?
the crankshaftA flexplate is mounted to the crankshaft and connects the output from the engine to the input of a torque converter. Torque converters replace the clutch of a manual transmission.
What does a loose flywheel sound like?
Loose flywheel or flexplate bolts make a rattling or knocking sound that changes with engine speed. It's heard behind the engine, where it mounts to the transmission bellhousing.
How do I know if my flywheel is cracked?
The most common symptom of a bad flywheel is bad noises at idle. You can also feel vibrations, gear slippage, or a burning smell coming from the transmission. You may also notice other shifting issues. While there are not all of the possible signs, it's the most common ones.
Can you drive with a damaged flywheel?
It is possible to drive with a bad flywheel if the damage is minor. However, this does not mean that it is advisable to do so. The fault could lead to more serious damage affecting the clutch components, crankshaft, and engine itself. You will feel more engine vibrations and it will affect its overall performance.
What does a loose flywheel sound like?
Loose flywheel or flexplate bolts make a rattling or knocking sound that changes with engine speed. It's heard behind the engine, where it mounts to the transmission bellhousing.
1.6 liter Flexplate issue | 2013+ Ford Escape Forum
I have a 2014 escape with a brokenflex plate. I had the engine replaced last feb. at 130000 miles by a Ford dealer. Now the car is back in for a broken flexplate, and they are not going to cover it. A flex plate should never break under normal circumstances so, either the dealer who replaced the...
Q: The flexplate has cracked twice in the past 6 months. - YourMechanic
Hi there. Aside from a manufacturing defect, the only things that will cause a cracked flex plate are improper torque on the plate bolts at the crank and torque converter and the most common cause of transmission to engine misalignment; sometimes caused by missing alignment dowel pins that mate the transmission to the engine.
Broken Flexplate, Again | The Chrysler Minivan Fan Club Forums
About 5 months ago, I replaced the flexplate on my 2012 CT&C. Now, it needs to be replaced again. My transmission and Torque Converter are brand new with aprox. 5,000 miles. I do a lot of trailering, but none lately. No aftermarket flexplate yet, so I'm stock with OEM. My question, anyone...
First Things First: What Is a Flexplate?
In simple terms, a flexplate is a circular metal disc with perforated holes located within the engine that connects the crankshaft to the torque converter.
Ways to Identify a Flexplate Gone Bad
Now that you’ve seen what precisely a flexplate is and its role in the transmission system, you’ve probably realized that flexplate is, indeed, a crucial mechanical part.
Common Causes of Faulty Flexplates
Those mentioned above are the symptoms of faulty flexplates. However, the most common causes of flexplate warpage are:
Cost to Replace a Flexplate
After identifying a flexplate replacement, you might be looking to determine the actual cost to replace a flexplate.
Final Word
So, you see, the health of your flexplate is essential. It determines the smooth running of your vehicle while also allowing for a noise-free ride.
How much does it cost to install a flexplate?
Based on all these factors, you can get your flexplate under $100 or for a couple of hundred dollars. Combine all of the factors mentioned above, and you safely total a cost of around $1200-$1500 to replace your flexplate.
What causes flexplate damage?
Aside from a manufacturing defect, the only things that will cause a cracked flex plate are improper torque on the plate bolts at the crank and torque converter and the most common cause of transmission to engine misalignment; sometimes caused by missing alignment dowel pins that mate the transmission to the engine.
How do you tell if you have a cracked flexplate?
Clunking, grinding, chirping, or rattling noises from rear of engine when engine is idling.
How long does it take to replace a flexplate?
The flexplate is a difficult part to get a hold of, so the whole job can range around almost six to seven hours of work. That means it would cost you about $600 to $700 in labor costs for this procedure.
Is the flexplate part of the transmission?
Basically a flywheel or flex plate is the round metal disc shaped component that transfers power from the engine to the transmission. A flywheel is usually referenced to a car with a standard transmission,and a “flex plate” is used with automatic transmissions.
Is a flywheel and flexplate the same thing?
1. Flywheels are typically found on vehicles equipped with manual transmissions, while flexplates are used in vehicles with automatic transmissions. A manual transmission has a flywheel that is attached to the crankshaft and has a clutch disk in between the pressure plate and flywheel.
What does a flexplate do on automatic transmission?
A flexplate (or flex plate) is a metal disk that connects the output from an engine to the input of a torque converter in a car equipped with an automatic transmission. It takes the place of the flywheel found in a conventional manual transmission setup.
How to fix a bad flex plate?
Next comes removal of the bad flex plate, replacement with a new one, and then reinstallation of the transmission into your vehicle. Your mechanic will also check your transmission for any other indicated problems, and then make sure that the engine and transmission are properly aligned before finishing the repair process.
What is a flex plate?
The flex plate is a metal disk that mounts the torque converter in an automatic transmission to the rear of the engine’s crankshaft. The flex plate has a ring gear around its circumference, which mates with the starter motor when you start your car. As its name suggests, the flex plate’s thinness and light weight allows it to “flex” ...
Why is my Flex Plate failing?
A bad flex plate usually has failed due to either damage or wear and tear, so replacement with a new flex plate is the only solution. Because the flex plate is an integral part of your car’s powertrain, and replacing it involves removing the transmission, a significant amount of labor will be involved. Your mechanic will first inspect the condition ...
How to tell if flex plate is bad?
Many factors can cause wear to and deterioration of your flex plate. Here are some of the warning signs of a bad flex plate: Clunking, grinding, chirping, or rattling noises from rear of engine when engine is idling. Knocking noise when engine is shifted into drive or reverse. Heavy vibrations felt through the driver’s seat when driving ...
Can a bad flex plate cause an accident?
A bad flex plate could potentially cause a loss of power to the wheels and result in an accident. Many factors can cause wear to and deterioration of your flex plate. Here are some of the warning signs of a bad flex plate:
Does a manual transmission have a flex plate?
If your car has an automatic transmission, it most likely has a flex plate. If your car has a manual transmission, it does not have a flex plate. In manual transmission vehicles, the flywheel and the clutch perform a similar function to that of the flex plate and the torque convertor.
What is a Flexplate?from carbibles.com
That device is known as a “flywheel” and its somewhat more recent counterpart, which is fitted to engines within vehicles with an automatic transmission, is known as a “flexplate.”
Why do you need a flexplate?from carbibles.com
The flexplate will normally have a variety of holes drilled into its surface which perform various tasks. Some of these holes are to facilitate mounting the flexplate to the crankshaft whereas the others are for torque converter settings and weight balancing – very important for a spinning object in order to avoid bumps and unevenness. Because of the balancing aspect of the flexplate it is important that, when removed for servicing, the flexplate must be replaced in exactly the same position.
Why is a flywheel flexible?from carbibles.com
A flywheel doesn’t need this amount of flexibility since it is decoupled from the engine by the clutch when the driver changes gear.
What causes flexplates to snap?from carbibles.com
Flexplate malfunction can be caused in several ways, some of which require a well-equipped workshop in order to diagnose but some common ones are: The engine or torque convertor is out of balance. A fault on the starter drive sometimes causes teeth or the ring gear to wear rapidly or snap.
How do flexplates work?from transdepot.net
Like flywheels, flexplates normally handle coupling to the starter motor, via teeth cut along the outer edge of the plate. These teeth give the flexplate a gear-like appearance, in spite of this being a secondary function.
Why are flexplates lighter than flywheels?from transdepot.net
Flexplates are generally much thinner and lighter than flywheels due to the smooth coupling action of the torque converter and the elimination of the clutch surface. Like flywheels, flexplates normally handle coupling to the starter motor, via teeth cut along the outer edge of the plate.
Can you manually flex a flexplate?from carbibles.com
Just to put this “flexibility” into context it should be remembered that you cannot manually flex a flexplate – this will normally only occur when the considerable forces of a powerful engine causes the flexplate to spin at high speeds and the torque convertor comes into play in order to change the gear in the automatic gearbox.
How to fix a bad flex plate?
Next comes removal of the bad flex plate, replacement with a new one, and then reinstallation of the transmission into your vehicle. Your mechanic will also check your transmission for any other indicated problems, and then make sure that the engine and transmission are properly aligned before finishing the repair process.
What is a flex plate?
The flex plate is a metal disk that mounts the torque converter in an automatic transmission to the rear of the engine’s crankshaft. The flex plate has a ring gear around its circumference, which mates with the starter motor when you start your car. As its name suggests, the flex plate’s thinness and light weight allows it to “flex” ...
Why is my Flex Plate failing?
A bad flex plate usually has failed due to either damage or wear and tear, so replacement with a new flex plate is the only solution. Because the flex plate is an integral part of your car’s powertrain, and replacing it involves removing the transmission, a significant amount of labor will be involved. Your mechanic will first inspect the condition ...
How to tell if flex plate is bad?
Many factors can cause wear to and deterioration of your flex plate. Here are some of the warning signs of a bad flex plate: Clunking, grinding, chirping, or rattling noises from rear of engine when engine is idling. Knocking noise when engine is shifted into drive or reverse. Heavy vibrations felt through the driver’s seat when driving ...
Can a bad flex plate cause an accident?
A bad flex plate could potentially cause a loss of power to the wheels and result in an accident. Many factors can cause wear to and deterioration of your flex plate. Here are some of the warning signs of a bad flex plate:
Does a manual transmission have a flex plate?
If your car has an automatic transmission, it most likely has a flex plate. If your car has a manual transmission, it does not have a flex plate. In manual transmission vehicles, the flywheel and the clutch perform a similar function to that of the flex plate and the torque convertor.
