The manual says to use 23 ml or 0.8 ounces of new synthetic grease. My cone had WAY more than this amount in it. I did a lot of reading and digging and found that the replacement tubes I ordered from Sea Doo is what they use. The tubes I bought are 3.7 ounces.
What oil do you use in a jet pump?
XPS Synthetic Jet Pump Oil uses a unique combination of synthetic base stocks and additives that allow higher loads, superior shear stability and reduced oxidation compared to other synthetics and conventional APl GL-5 oils. Recommended for use in Sea-Doo jet pump requiring oil.
What oil goes in a Seadoo?
4T 5W-40 Synthetic Blend Oil.
How often should you change the oil in a Seadoo?
every 100 hoursMaintenance schedule Ride for up to 100 hours or one year before your first oil change (100 hours for the Sea-Doo SPARK and 50 hours for all other models). After that you'll only need one oil change every 100 hours or one year.
How many quarts of oil does a Sea-Doo Spark take?
Everything in kit are correct parts, however you 2.5 qts of oil to do full oil change on any seadoo spark.
Can you use regular motor oil in a jet ski?
Four-stroke Kawasaki Jet Skis use 10W-40 4-stroke marine oils (API: SE, SF, SG, SH or SJ with JASO MA), while 2-stroke jet skis use TC-W3 2-stroke marine oils. Kawasaki recommends the OEM Jet Ski oils, but if they are not available, you can use any other type of oil if it meets the requirements.
How much oil does a jet ski use?
Jet Skis take an average of 5-6 quarts of oil, while you can expect to change 4-5 quarts, depending on the model. The oil capacity of the supercharged Kawasaki Ultra 310 jet ski is 5.8 quarts, but just around 4.8 quarts are changeable.
How many hours are Seadoos good for?
On average a jet ski should have approximately 30 hours a year. Anything more than 30 hours per year is considered “high hours”. What is this? Most jet ski models have a lifespan of approximately 300 hours, but if properly maintained they can last much longer.
How often should you change spark plugs on a Sea-Doo?
Start with Spark Plugs These should be replaced every couple of seasons to ensure you're not stuck at the launch when the first hot day comes around. It's a good idea to inspect or change your spark plugs as indicated in your operator's guide. Changing them is easy or your Sea-Doo dealer can help. 1.
How do you break in a new Sea-Doo?
Although every jet ski is different, there are some basic rules you should follow during the break-in period, which are as follows:Read the owner's manual.Don't skip the pre-ride check or the after-ride care.Warm up the engine.Be light on the throttle.Adjust your speed often.Avoid tow sports.More items...
What oil does a Sea-Doo 4 Tec take?
4-stroke Sea-Doos use XPS 4-Stroke Synthetic Blend Oil (P/N 293 600 121) according to the manufacturer. If the recommended XPS oil is not available, you also can use 5W40 or 10W40 engine oil alternatively.
Do jet skis have oil filters?
Similar to the type of oil required, the oil filter needed is going to vary. Always use the same type of oil filter as the one that came standard. Pump. A good pump is essential for changing the oil on a jet ski.
How do I check my Sea-Doo oil level?
0:142:00Sea-Doo Check Your Oil Level Takes Only 5 Minutes Rotax ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipRight underneath that middle seat pull up this cover all right down here is your motor. And thenMoreRight underneath that middle seat pull up this cover all right down here is your motor. And then here's your oil fill. And here's your oil dipstick. Pull that out.
What is the difference between 5W40 and 10W40 motor oil?
5W40 vs 10W40 – Differences The main difference between the two oil types is that one is thinner than the other. The 5W40 is thinner than the 10W40 at lower temperatures. But when the temperature is higher, both motor oils similarly perform their intended functions (using the same viscosity).
What does 5w 40 oil mean?
5w40 motor oil has a winter viscosity grade of five, meaning it's less viscous at very low temperatures, compared to, say, 10w40. It has a hot viscosity grade of 40, which means it is just as viscous as 10w40 at high temperatures but less viscous than oils such as 15w50.
What is the oil to gas ratio for a 2 stroke jet ski?
Suggested 2-Stroke Personal Watercraft Oil / Fuel Pre-Mix Ratio's: Yamaha WaveRunner: 500/650/701/760/1100/1200 (NPV): 50 to 1 ratio oil to fuel ratio (2.5 ounces oil to one gallon fuel). Yamaha WaveRunner: 800 & 1200 (PowerValve Motors): 32 to 1 oil to fuel ratio (4 ounces oil to one gallon fuel).
How do you change the oil on a jet ski?
Step 1: Warm Up The Engine. You need to get the jet ski engine warm, a 15 minute ride on the water will be enough to warm up the engine oil. ... Step 2: Remove The Engine Oil. ... Step 3: Replace Oil Filter. ... Step 4: Replace O-Rings. ... Step 5: Add New Oil. ... Step 6: Check For Leaks. ... Step 7: Replace Spark Plugs.
How often should I change the oil on a Sea Doo jet ski?
An oil change on a Sea-Doo is a 23 step procedure. It is necessary to do an oil change every 50 hours to maintain the engine integrity and the manufacturer’s warranty on the jet ski. Failing to do the correct maintenance will significantly diminish the engine life and cause breakages. There are different types of jet ski engines.
What Type Of Oil Does A Sea-Doo Use?
The recommended oil for your Sea-Doo jet ski will depend on a 2 stroke or a 4 stroke engine.
How Much Does An Oil Change On A Sea-Doo Cost?
If you end up taking your Sea-Doo to a service center, they can charge you anything from $200 to $550 for spare parts and labor.
How Many Hours Does A Sea-Doo Engine Last?
Sea-Doo 4-stroke engines last around 300 to 400 hours and should get a full service every 100 hours. Supercharged models require a rebuild either at 100 or 200 hours depending on model and year. The earliest supercharged Sea Doos are known to be less reliable and more expensive to maintain. Newer models have been improved considerably. At the time I’m writing this, we have RXP-X and RXT 260’s that are 6 years old.
How long does a Sea Doo last?
Based on the average usage of around 30 hours per year, owners should be able to get 7-10 years of good performance from their Sea Doo before anything major needs repair or rebuild. You can make your engine last by making sure you do maintenance when needed. Remember to follow a winterization oil change as part of the seasonal maintenance.
How much does it cost to replace a Sea Doo engine?
After the recommended number of hours have lapsed on your Sea-Doo, you can do a complete engine replacement. This should cost you approximately $ 500 to 600.
Why does Sea Doo run longer?
The newer Sea-Doo models can run longer between maintenance intervals due to more advanced engines, better lubricants, and parts. In every owner’s manual, you will receive an inspection checklist you need to follow to keep the warranty. Some maintenance inspection points need to be checked by the owner regularly.
How to clean oil from a jet pump?
Also make sure no oil remains on cone and jet pump mating surfaces. If available, use a solvent to clean these surfaces.
How many flat spots on a jet pump?
Grab the shaft (it has 2 flat spots) and try to move up and down. If there is any movement greater than .05 mm, the jet pump should be rebuilt.
How many bolts to remove nozzle on a ratchet?
Using 13 mm ratchet, remove 4 bolts attaching nozzle to pump, and remove nozzle, being careful to catch 2 o-rings at the top (newer models don't have these).
How to remove a cone on a jet pump?
Remove 3 8mm cone attachment bolts. Place the pan under cone. Lightly tap the tip of the cone to loosen it. When cone comes off, oil should run out (if no oil present, you have problems!). Check to see that no metallic particles are present in the old oil (use a magnet, if you have one). If any metallic particles are present, service of jet pump will be necessary.
How to fill a cone with oil?
Add oil to fill opening until it reaches top. Lightly tap the sides of the cone to release any air (you may also wait a few minutes for excess air to come out). Repeat until oil is level with lower threads at fill opening and no more air escapes.
Do you need to reinstall pusher parts into cone?
If your pump utilizes a pusher, there are several styles and you’ll need to reinstall pusher parts into cone properly then install cone carefully to insure that pusher is working properly.
Customers who bought this item also bought
Sea-Doo PWC/Sport Boat OEM XPS Synthetic Grease 14oz. Tube/Cartridge 293550010
Special offers and product promotions
Amazon Business: Make the most of your Amazon Business account with exclusive tools and savings. Login now
Product description
XPS Synthetic Jet Pump oil is a high-quality, full-synthetic lubricant designed to keep Sea-Doo jet pumps running like new. Full-synthetic formula offers excellent lubrication Prevents wear and corrosion
Customer reviews
There was a problem filtering reviews right now. Please try again later.
What Type of Oil Does a Sea-Doo Use?
4-stroke Sea-Doos use XPS 4-Stroke Synthetic Blend Oil (P/N 293 600 121) according to the manufacturer. If the recommended XPS oil is not available, you also can use 5W40 or 10W40 engine oil alternatively. Just make sure the oil is classified by the American Petroleum Institute (API) and meets the requirements of SM, SL or SJ.
What is the best oil for a 2 stroke sea doo?
The best 2-stroke Sea-Doo oil is the XPS 2-Stroke Oil, specially designed for two-stroke Sea-Doos. If this oil is not available, you can still use any other 2-stroke marine oil which meets the manufacturer’s recommendations.
What is the best Sea Doo oil?
As you can see, the best Sea-Doo oil is the XPS. It’s specially designed for watercraft, and the manufacturer markets it directly, so you can’t go wrong with it!
Who makes XPS oil?
The XPS oil is marketed by BRP (Bombardier Recreational Products). According to the company, they decided to release their own brand of oil, as they set high lubrication standards for their engines while there are no proper regulatory standards for oils on the market!
When to change oil on Sea Doo?
It’s also recommended to change the oil as part of the winterization, and to store your Sea-Doo with fresh oil for the winter months!
Can you use 10W40 oil in Sea Doo?
If this type of oil is not available , you can still use 10W40 or 5W40 engine oils which meets the manufacturer’s recommendations. Considering the fact that even the most economical Sea-Doo can cost you at least $1,000 a year, it makes no sense to use a cheap oil in your Sea-Doo, as the difference in the oil price is a pretty small part ...
Does it make sense to save a couple of bucks on oil?
Taking this into account, it makes no sense to try to save a couple of bucks on the oil.
