Cost of Concrete Driveway
| Concrete Driveway Costs | Zip Code | Sq. ft. | |
| Basic | Better | Best | |
| Concrete Driveway – Material Prices | $375.00 - $437.50 | $462.50 - $525.00 | $550.00 - $650.00 |
| Concrete Driveway – Installation Cost | $1250.00 - $1275.00 | $1500.00 - $1575.00 | $2250.00 - $2900.00 |
| Concrete Driveway – Total | $1625.00 - $1712.50 | $1962.50 - $2100.00 | $2800.00 - $3550.00 |
Full Answer
What is the average price of a concrete driveway?
The average is just above $3,000, or $6 per square foot. Factors like location, size, decorative elements, potential reinforcement, and removing the existing surface can all influence that range. A simple concrete driveway ranges between $4 and $7 per square foot.
What is the average cost of installing a driveway?
Driveway pavers cost $10 to $30 per square foot on average for materials and labor. The average cost to install a 24’ x 24’ (2-car) paver driveway is $5,700 to $17,200. A high-end block paving stone or brick driveway costs $25 to $50 per square foot or between $15,000 and $30,000.
How much should a new driveway cost?
- Gravel: $1 to $2 per square foot
- Chip seal/tar-and-chip: $5 to $10 per square foot
- Asphalt: $7 to $13 per square foot
- Concrete: $8 to $18 per square foot
- Rubber: $10 to $25 per square foot
- Pavers: $10 to $50 per square foot
- Grass (pavers plus small areas of grass in between): $10 to $15 per square foot
How much crushed stone do I need for my driveway?
Use this formula to determine how much crushed stone you will need for your project: In the construction world, most materials are measured in cubic yards. Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This will tell you how many cubic yards of crushed stone you need.
How much does it cost to pour a 20x20 driveway?
A simple, traditional driveway typically costs $4 to $7 per square foot. Customizing designs or adding unique features can increase that price up to $20 per square foot. A standard 20-foot by 20-foot driveway costs $1,600 to $8,000, depending on the customization you choose.
How do you calculate concrete for a driveway?
Multiply the square footage by the depth in feet to find the volume in cubic feet. You can find volume by measuring length × width × depth. Finally, divide the cubic footage by 27 to find the volume in cubic yards. This is the amount of concrete needed.
Is it cheaper to do concrete or blacktop?
The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 to $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 and $6.00 per square foot for a standard installation.
Is a concrete driveway worth it?
The combined strength and longevity make concrete a relatively good value for large areas of paving. As a driveway surface, concrete is more expensive than gravel and asphalt, but it is considerably less expensive than a driveway made with brick, cobblestone, or concrete pavers—and it typically outlasts all of these.
How thick should a concrete driveway be?
four inches thickAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.
What depth should a concrete driveway be?
As a rule of thumb, concrete slabs supporting lighter weights such as paths, patios and shed bases will need to be 75-100mm thick, while driveways and garages need to be at least 100mm thick. Slabs intended for commercial use should be at least 175mm thick and reinforced.
What is the cheapest way to do a driveway?
A gravel driveway is by far the cheapest and quickest to install, especially if the existing driveway's sub-base is sound.
How long does concrete driveway last?
25 to 30 yearsThe average life of your concrete driveway will depend on installation methods, environmental conditions and temperatures. However, you can expect your surface to last anywhere from 25 to 30 years with proper care. The key to prolonging the life of your investment is to pay attention to wear and tear each season.
What's the difference between concrete and cement?
What is the difference between cement and concrete? Although the terms cement and concrete often are used interchangeably, cement is actually an ingredient of concrete. Concrete is a mixture of aggregates and paste. The aggregates are sand and gravel or crushed stone; the paste is water and portland cement.
Is it cheaper to pave or concrete a driveway?
As far as installation costs and concrete costs go, poured concrete is technically the most affordable per square foot. However, even though the upfront cost of pavers is higher, concrete pavers offer greater value and durability than poured concrete and stamped concrete.
Does concrete driveway increase home value?
“A [concrete] driveway can increase your property's value between 5 and 10 percent” says Fast Sales Homes. That means “a $500,000 home can increase to a $550,000 home.” On average, a new 2-car concrete driveway costs anywhere from $3-$6,000, which makes this type of an investment pretty significant.
Is it better to have a concrete or asphalt driveway?
Concrete driveways normally last longer than asphalt. In general, if installed properly in a suitable climate and maintained regularly, your concrete driveway should last 30 to 40 years, while an asphalt driveway is generally good for 20 to 30 years.
How many yards of concrete do I need for a 24x24 x4 slab?
7.11 yardsFor example, for a concrete slab that is 24' X 24' X 4”, simply enter 4 in the Thickness/Depth field, 24 in the Width field, and 24 in the Length field. Click “Calculate”. Your answer should be 7.11 yards. Note: The Concrete Volume Calculator can also be used to determine yardage for aggregate products.
What is the formula for calculating concrete?
Concrete Calculator Formula For. figuring concrete yardage. The concrete calculator formula to figure cubic yards for a square or rectangle shaped concrete slab is (Length x Width x Thickness) / 27.
How many square feet is an average driveway?
Size: The average 2-car driveway in the U.S. is 16 x 40 feet, or a total of 640 square feet. Many driveways may be larger or smaller, depending on the distance from the garage or house to the street and possible extensions for RV parking.
How many yards is a 20x20 concrete slab?
For a 20×20×4 slab, generally, you will need approximately 4.88 cubic yards or 132 cubic feet or either 294- 60lb or 220-80lb bags of premixed concrete.
Cheapest Driveway Material?
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maint...
How Long Does a Driveway Last?
Driveways typically last around 30 years total, but some need more maintenance than others. Asphalt and concrete driveways need maintenance every f...
How Much Value Does a New Driveway Add?
On average a new driveway can add between $5,000 to $7,000 in added home value. Of course, that value depends upon the size of your driveway.
Which is Cheaper? Concrete or Asphalt Driveway?
Asphalt runs slightly cheaper than concrete with an average square foot cost of $3 to $7 but it won’t last as long as concrete. A concrete driveway...
How Long to Wait Before Driving on New Driveway?
It’s typically recommended that you stay off a new asphalt driveway for 24 hours, longer if it’s humid out. If you have a concrete driveway, you’ll...
How Often Should You Seal a Driveway?
Professionals recommend resealing an asphalt driveway every three to five years but it could be sooner depending upon the state of your driveway. P...
How much does it cost to remove a driveway?
Existing driveway removal – This normally runs in the neighborhood of . 50 – $1.50 per square foot. This involves the use of heavy equipment, such as: Jack hammers, Bobcats, etc.
How much does a 2 car driveway cost?
x 40′ ft. that equals 640 sq. ft. with a a minimum of 1/8 inch per foot slope for drainage will cost you $3,840 – $4,480 or $6-7.00 per square ft.. This would be on the low-end.
Can you install concrete driveways?
Installing Concrete driveway isn’t an easy task to perform and can leave you with a sore back. You might find it more cost effective to hire a landscaping or, mason company to perform the work for you. Landscaping or, mason companies will most always get better prices on Concrete driveway — saving your back and additional costs, so shop around, ask your neighbors if they can recommend someone.
When to get contractor pricing?
Try to get prices in late Fall, early winter – you should expect aggressive pricing discounts by waiting for a contractor’s down season.
What causes a driveway to be damaged?
Location, seismic activity, large tree roots, extreme temperatures, age, and construction affect how long a driveway will last and can cause several kinds of damage to your driveway. If that happens, a reliable contractor can help remove and replace the driveway. Advertisement. Photo: depositphotos.com.
How are prices determined for labor and materials?
Prices for labor and materials are determined by geographic location. Urban areas tend to have higher labor rates than other areas, and the time of year can also affect the cost. Some regions have climates that prevent year-round concrete driveway installations, so demand and expenses may increase during the regular season.
What is a driveway made of?
Most driveways are made of concrete or asphalt, depending on the region you live in. Concrete driveways are a popular choice due to their low cost and long lifespan. If you’re budgeting for concrete driveway costs, check out these three types of concrete.
How much does labor cost for a concrete driveway?
Labor makes up nearly half of concrete driveway costs. If the average price is $4 to $7 per square foot, then labor usually makes up about $2 to $3 per square foot , and concrete costs make up the rest. Laborers will prepare the site, build the concrete forms, add rebar if needed, lay the concrete, then smooth it out.
What is a concrete apron?
Concrete Driveway Apron. Most municipalities require a concrete apron to connect a driveway to the road. It’s typically the same width as the driveway and includes where a sidewalk is built. Often, this apron is built when a developer prepares a new housing development, as it’s cheaper to do all at once.
How thick is a concrete driveway?
Most concrete driveways are 4 inches thick, but you may need to increase the thickness to withstand the extra weight if you have heavy vehicles or equipment to park. In general, concrete is sold by the cubic yard. The average concrete cost per yard is $125 to $150.
What to consider when budgeting for concrete driveway?
The terrain could require extra work or materials to ensure the driveway is stable, and some specialty designs could be added at an additional cost.
HOW MUCH IS A CONCRETE DRIVEWAY?
The best way to find out what you'll pay for your project is to get quotes from concrete driveway contractors near you. But, to help you budget, here are average price ranges for decorative concrete driveways:
DOES A CONCRETE DRIVEWAY INCREASE HOME VALUE?
This can set the tone for potential buyers that the rest of the property will follow suit. The durability, lower maintenance requirements, and longer lifespan of concrete (vs. asphalt) also adds to its ultimate value.
What is the most variance in concrete?
Design: With the many design options concrete offers, this is where the most variance can occur. From simply including an integral color in the mix to a complicated stamped and stained design, the parameters are really up to you and what you want to spend. (See pictures of decorative concrete driveways .)
What is the driveway of a house?
The driveway is often the first thing visitors, or potential buyers, see when they arrive at your home. To make a good first impression, it should be welcoming, clean, and in good repair. This can set the tone for potential buyers that the rest of the property will follow suit.
How many square feet are there in a 2 car driveway?
is 16 x 40 feet, or a total of 640 square feet. Many driveways may be larger or smaller, depending on the distance from the garage or house to the street and possible extensions for RV parking.
How long does concrete last?
Concrete is more durable than asphalt and requires less maintenance. It can last for decades, while asphalt will generally only last 10 to 15 years before needing replacement. There are many repair options for concrete as well that can extend its life even further.
How much does it cost to replace a concrete driveway?
What does it cost to replace a concrete driveway? In addition to the installation costs noted above, you can expect to pay approximately $1.00 per square foot for tear out and removal of your existing driveway. There may be additional disposal costs as well.
How long does a gravel driveway last?
A gravel driveway is the cheapest way to go and it’ll last more than 100 years with regular maintenance. But it’s not attractive to every homeowner and tends to kick up dust on vehicles. Concrete driveways remain a low-cost option because they come in slightly cheaper than an asphalt driveway and often require less maintenance. Concrete will expand and contract, leading to chips and cracks, plus it will stain easily. Concrete driveways typically last between 25 and 75 years.
What is the cheapest driveway material?
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maintenance and dust suppression.
How much does a heated driveway cost?
Gravel is the cheapest material to use at just $1 to $3 per square foot while a heated driveway is the most expensive at $12 to $18 per square foot. But a heated driveway is only desirable in colder climates where it can melt ice and snow in winter.
How long does asphalt last?
It will soften in heat and will crack easily. Asphalt driveways will last around 15 to 30 years but need to be sealed every three to five years.
How much does a new driveway add to the value of a home?
On average a new driveway can add between $5,000 to $7,000 in added home value. Of course, that value depends upon the size of your driveway.
How much does it cost to build a driveway?
It comes with a cost and a commitment for a few days to get the project done. A driveway costs between $1,700 to $7,000 for materials and averages $4,500. Expect to pay between $2 and $15 per square foot for materials and installation. You can save money by choosing a material that fits your budget, but each material has a different lifespan, so weigh the costs against the longevity.
How long do pavers last?
Pavers are another option and come with a 25- to 75-year lifespan. They cost more and will take longer to install.
A Concrete Driveway Doesn't Have to Break the Bank
Driving over rough Oklahoma roads can take a toll on cheaper materials like asphalt concrete. Concrete driveways cost a bit up front to install, but in the long run will save you money by lasting longer and requiring minimal replacement because of its durability.
Concrete Driveway Cost
Concrete contractors will need adequate time to pour a new driveway. This depends on the shape of the existing surface and what your needs for your driveway are. The average cost for material delivered is $125 per cubic yard which comes out to around $2,000 for the materials alone for a standard driveway.
How much does it cost to install a concrete driveway?
The average installation cost of a new concrete driveway is $7.65 per square foot, or $5,355 for a residential driveway that is 40 feet long and 16 feet wide, with a small parking pad at the area closest to your home or garage. When removal of old concrete or significant excavation is required, the cost will be higher.
What are the enhancements to a driveway?
Enhancements & Extras – Enhancements include pigmenting, acid staining, embedding tile or stone and stamping the driveway to make it look like pavers or flagstone.
How thick is a driveway?
Driveway Depth and Strength – Most driveways are built with concrete 4 inches thick and a strength of 2,500 to 5,000 psi (pounds it can support per square inch), with rebar wire encapsulated within the concrete to provide further strength and prevent cracking. When a motorhome or heavy equipment will be parked on the driveway, 6 inches of 5,000 psi or stronger concrete is recommended. In general, cold climates require stronger concrete to withstand freezing and thawing cycles.
What is the easiest drive to install?
In general, cold climates require stronger concrete to withstand freezing and thawing cycles. Driveway Shape – Rectangular drives are the easiest to install. Those with turns and a turnaround bring slightly higher labor costs. Removal of Old Material – Asphalt is fairly easy to remove.
What are extras in a driveway?
Extras are items like flaring the driveway where it meets the road for easier entry and adding a turnaround to the side of the drive, so you can enter traffic forward. A list of enhancement costs is below. Time of Year – During the peak of the installation season, cost estimates will probably be higher.
How wide is a concrete driveway?
Concrete Cost Factors. Here are the most important factors affecting driveway cost. Driveway Size – In most communities, driveway must be a minimum of 12 feet wide for a single car driveway.
What is the upside of removing a driveway?
The upside to removing a driveway is that its gravel and sand base can be used for the new drive, reducing material costs. Site Conditions and Excavating Requirements – The need for excavating varies widely based on the terrain and other site factors.
How much does it cost to replace a driveway?
Replacing your driveway will cost somewhere between $2,200 and $7,500. That consists of both the rate to get rid of the existing concrete (which costs about $540 to $1,510) and the brand-new setup cost of anywhere from $1,800 to $6,000. The specific rate depends upon the size and kind of cement.
How much does it cost to put stamped concrete in a driveway?
Setting up stamped concrete will cost somewhere between $8 and $15 per square foot. This alternative enables you to include patterns and texture in your driveway. You can mark the material to seem like inlaid stone, tile, and even strong marble.
How much does a concrete driveway cost?
A simple concrete driveway will vary somewhere between $4 and $7 per square foot. That consists of about $3 to $4 per square foot for products and $2 to $3 per square foot for labor. A strong blend with 5,000 or more pounds per inch strength leaves you at the higher end of that range.
What factors affect the price of a concrete driveway?
The vast ranges throughout this article are mostly due to the many elements that can affect the price of your concrete driveway. Style, products, labor costs, and the location and environment in which the setup happens all contribute.
How much does a concrete driveway cost?
A simple concrete driveway ranges between $4 and $7 per square foot. That includes about $3 to $4 per square foot of materials and $2 to $3 per square foot of labor. A strong mix with 5,000 or more pounds per inch strength leaves you at the high end of that range.
How much does it cost to install asphalt?
The price to install an asphalt driveway is comparable to concrete, at about $7 to $13 per square foot compared to $4 to $15 per square foot for the concrete mix. But asphalt doesn't last as long and requires more maintenance, potentially increasing long term costs.
How much does an apron cost?
The price of a driveway apron ranges between $3 and $10 per square foot. It connects your property to the public roadway and is usually about 8 to 15 feet long. Homeowners are responsible for maintaining their apron, but some municipalities offer to replace deteriorating surfaces to keep the roadway safe.
What is the difference between concrete and asphalt?
The difference between concrete and asphalt comes down to price, look and durability.
What factors affect the cost of a concrete driveway?
The wide ranges throughout this guide are largely due to the many factors that can influence the cost of your concrete driveway. Design, materials, labor prices, and the area and climate in which the installation occurs all play a role.
How much does it cost to stain a driveway?
Adding staining to the driveway installation increases project prices to $6 to $12 per square foot. It is done while the material is still wet and allows you to add a tint that matches your home in almost any color.
How many hours do you need to work on concrete?
Expect to spend at least 50 hours of total work on the project.
How long does a concrete driveway last?
Asphalt driveways last 15 to 30 years, and concrete driveways last 30 to 40 years on average, depending on the climate and usage. Brick and stone pavers last 25 to 50 years. A cobblestone or gravel driveway lasts up to 100 years if well-maintained.
What is the cheapest driveway material?
The cheapest driveway material is gravel at $1 to $3 per square foot using aggregate made of crushed shells, crushed concrete or asphalt, or pea gravel . Tar and chip seal driveways are the second cheapest at $2 to $5 per square foot.
How much does gravel cost?
Well-built gravel driveways require light raking and new gravel once or twice a year. Gravel prices range from $10 to $50 per ton, depending on the stone size and type.
How much does it cost to build a driveway?
The cost to build a driveway ranges from $600 to $18,000, depending on the material. The cheapest driveways cost $1 to $3 per square foot for gravel, while standard concrete and asphalt driveways cost $3 to $8 per square foot.
How much does an exposed aggregate driveway cost?
Exposed aggregate or pebble finish driveways cost $5 to $11 per square foot or $3,000 to $6,600 on average. Exposed aggregate features stones mixed into concrete or seeded on the surface. Natural aggregates provide a textured, nonskid surface in various colors, including pastels, earth tones, and deep reds and blues.
How much does a chip seal driveway cost?
Chip seal driveways cost $1,200 to $3,000 or $2 to $5 per square foot. Chip seal, also called tar and chip, lasts 7 to 10 years. Tar and chip driveways have the durability of blacktop, come in various colors, and feature layers of stone aggregate spread over hot liquid asphalt.
How much does a driveway permit cost?
A driveway permit costs $50 to $200, depending on location. Most cities require permits for new driveway installations and replacements but not for repairs. Some municipalities waive the permit fee if there is already a paved apron connecting the property to a public street.
