How wide is a stair runner?
Stair runners, usually sold by the running foot or yard, can be 22 to 36 inches wide. To calculate the length of the staircase for a runner, you need to measure the depth of the stair tread and the height of the stair riser. The tread is the flat horizontal board upon which you step.
How do you calculate stair runner?
To measure straight stairs make sure to:
- Measure both the tread (horizontal step) and the riser (vertical part of step). This should add up to about 18".
- Then count the number of steps. ...
- Multiply the number of steps by the total inches per stair.
- Then divide by 12 to get the total linear feet necessary for your straight stairs. ...
How wide should stair carpet runner be?
Stair runners, usually sold by the running foot or yard, can be 22 to 36 inches wide. ... The standard runner rug is between 2 and 3 feet wide, and can range from 6 to 14 feet long. Ideally, you should have 4 to 5 inches of flooring visible on all sides of your carpet runner, like hedging.
How many lineal feet is needed for stair runner?
Runners are sold by the linear foot, this result is calculated/rounded up to a full foot. Footage calculation uses 19 inches per tread + riser total, a safe number for most straight stairs. SEE MORE INFO BELOW This result represents the linear footage needed. Select this length from the drop down list on the runner product page.
How wide should a stair runner be?
How wide should a runner be for a staircase?
How much space does a 32 inch stair runner have?
Why do you need a carpet runner for stairs?
See 1 more
About this website
How wide should runner be?
Runners come in a variety of lengths and widths. The standard runner rug is between 2 and 3 feet wide, and can range from 6 to 14 feet long. Ideally, you should have 4 to 5 inches of flooring visible on all sides of your runner.
How much space do you need on each side of a stair runner?
“It depends how wide your stairs are,” says Kirk. “In a three- to four-foot-wide staircase, you want to leave about three or four inches of wood exposed on either side. But if your stairs are five feet across, you'd adjust your runner proportionally—maybe to a seven-inch reveal on each side.”
How long should a carpet runner be for 12 stairs?
Thus a stairway with 12 tread-and-riser combinations would need 12 combinations times 18", plus an allowance for how you will start/end the rug. 12 x 18" is 216" or 18' long. But remember that treads can vary in depth!
How wide should runners be in a hallway?
Make your hall seem wider The runner's borders should run parallel to the walls of the hallway, drawing the eye down the rug's length and, if you wish to make a space seem shorter, then the runner should span between half and three-quarters of the hall's entire length.
Do you put padding under stair runners?
You must create a rug pad for each stair tread. Your rug padding should be narrower than your runner by at least one inch. Align the top edge of the rug pad against the back of the tread and use a yardstick to make sure it is straight.
Do runners make stairs look wider?
The best small staircase decorating idea is, simply, stair runners. Running up the middle of your staircase with space on either side, runners help to make narrow staircases look wider than they are. Patterned or striped carpet runners in particular work well as they create lines that can draw the eye upwards.
How long should a runner be for 13 stairs?
Multiply the number of steps by the total inches per stair. Then divide by 12 to get the total linear feet necessary for your straight stairs. We recommend adding one extra foot of runner length to your total, just to be safe.
What width is stair carpet?
It is typically approximately 3' wide. The usual allowance for the tread (the flat part you step on) is 10", and 8" for the riser (the back of the stair). Therefore, for every box stair, you require 3' (or the width of your stair) x 18" of carpet.
How much space on either side of a hallway runner?
Often, four to five inches of floor showing on each side of a standard hall (three feet wide) is a good balance. If you have a hallway that is wider, then leaving about six inches of floor showing on each side is comfortable.
How much space do you need between two runners?
Most resources recommend allowing six inches of space in between your runner and walls on all four sides. But because the majority of ready-made runners are between two and three feet wide, choosing the right width is something you usually don't have to worry about.
How far should a runner be from the wall?
In general, 6 inches on each side is an acceptable distance between the wall and the runner. If your hallway is 3 feet wide, for example, then a 2-foot-wide runner should be adequate. For wider hallways found in more public areas, you may consider a runner that leaves more space between its edges and the wall.
How wide should stair carpet runners be?
Stair runners come in many widths varying from 20" to 48" wide. The most common width is 27" for a standard staircase.
How wide should a stair runner be?
This width is available at most hardware stores, home improvement centers and carpet stores. Since most stairs have a 36- to 42-inch width , a 32-inch stair runner still provides 2 to 5 inches of visible wood floor space on either side of the runner.
How wide should a runner be for a staircase?
The company also notes that it is common to install a runner that is at least 32 inches wide if the runner itself is 18 to 20 feet long. The added width helps balance the length and height of the staircase.
How much space does a 32 inch stair runner have?
Since most stairs have a 36- to 42-inch width, a 32-inch stair runner still provides 2 to 5 inches of visible wood floor space on either side of the runner. Advertisement.
Why do you need a carpet runner for stairs?
If you have wood stairs in your home, you can install a carpet runner to protect the stairs from scratches, weathering and discoloration from sun exposure. A stair runner also provides traction and prevents injuries due to falls.
Stair Runners, How Wide Should They Be? What Kind Should I Buy?
Are you Confused? Well, these are all search terms for the same thing!
Stair Runners
Let's start with stair runner sizes, Stair runner size depends on how wide your staircase is?
The Most Popular Width Stair Runner
1/ 28 inch stair runner is by far the most popular stair runner width, and the reason for that is many staircases are 33 inches to 36 inches wide at least in the part of the world where I am and a 28 inch stair runner fits just perfect at that width.
Stair Runner Ideas & Colors
Wow, there are literally thousand of stair runner ideas and colors and we don't have enough time to show you all of them, but let's talk about some super popular carpet runner ideas and some stair runner fundamentals
Stair Runner Materials
Stair runners and carpet in general come in many different materials such as polypropylene, Tryexta, polyester, nylon and wool.
Conclusion
whether your buying a stair runner, carpet runner or just looking for stair runner ideas I hope this helped ease the burden a little bit
What are the advantages of stair runners?
In addition to the safety benefit, there is also a powerful aesthetic advantage to a stair runner. In fact, it draws attention to the attention whereas the bare surface beside it will act as an accent to the runner’s focal point. On the other hand, stair runners are one of the best ways to add texture to your staircase.
How thick should underpads be for stair runners?
When it comes to underpads, choose one that is thick, maybe around 1/4-inch since it can offer a decent amount of support while keeping the carpet from flaunting. For stair runners, the best options are rubber pads because of their density and firmness.
How Narrow or Wide Should Be A Carpet?
But nevertheless, the option you will pick will depend on the width of your stairs .
How to make sure carpet runner is fully protected?
To make sure that it is fully protected, give your carpet runner a tug. The moment you have secured the location, you can already pull the carpet runner towards the tread. Make sure that the runner is tucked evenly in the wedged part. Also, check that there is no any bulging.
Why do you need a stair runner?
Eliminate Noise. Another reason why you should consider a stair runner is that it eliminates noise. These runners pad the staircases to the extent that there’s no longer much noise or sound created when somebody is moving up or down the steps.
Where do you end a carpet runner on a stair?
Lastly, once you have finished stapling the carpet runner on every stair, end at the base in which the floor and top stair riser meets.
Do smaller patterns make stairs wider?
What’s more, on a narrow stair, smaller patterns may help in making the stair look wider.
How wide should a stair runner be?from rugdepothome.com
This width is available at most hardware stores, home improvement centers and carpet stores. Since most stairs have a 36- to 42-inch width , a 32-inch stair runner still provides 2 to 5 inches of visible wood floor space on either side of the runner.
Why Add a Runner?from thespruce.com
One of the most common and perhaps obvious reasons is safety. Wood or tiled stairs can be quite slippery, which can present a danger, especially when there are children, pets, or people with mobility issues in the home.
What is the best cushion for a stair runner?from thespruce.com
The best cushion for under a runner is very thin so that it doesn’t raise the height of the runner by much. It should also be dense, to adequately support the runner so that the carpet doesn’t flex too much when walked on. A pad of one-quarter-inch thickness is ideal for under a stair runner.
What is reveal in stairs?from stairrunnerstore.com
There are no “rules” as to the reveal. ( Reveal = exposed area alongside the runner) Stair and hall widths vary more than runner product widths, and most often width varies within the staircase or hall.
What is a stair runner?from thespruce.com
The Spruce / Christopher Lee Foto. A stair runner is a piece of carpet that doesn’t cover the entire width of the stair. It is typically installed over hardwood or tiled stairs. Runners come in virtually all colors and patterns and are also available in different widths.
Why should a cushion be narrower than a runner?from thespruce.com
The cushion should be slightly narrower than the runner, to allow the runner to sit tightly against the stair, and ensure the underpad is not visible from the side of an open staircase.
Where do you put a rod on a stair tread?from thespruce.com
Rods are an optional accessory to stair runners. A metal rod is installed at the back of the stair, where the riser meets the tread —such as pictured above. The rod is not actually holding the runner in place. The runner is installed using staples, tackless, or whatever other means deemed appropriate by the installer.
How wide should a stair runner be?
Additionally, a wider staircase looks more proportioned with a stair runner that leaves a significant amount of bare wood ( 7" or more) on either side. Therefore, you should first measure your stairs and see which stair runner width fits best with it. For standard staircases (3 feet wide), a 27" wide runner would be ideal. This length is neither too narrow nor too wide and provides you with a path that's wide enough without overpowering the stairs.
What is the best material for stair runners?
Wool is by far the best material for stair runners but they're also quite expensive. This material is soft on the feet, heavy-duty, and can last for years. If you're on a budget and can't afford to splurge on a wool runner, consider cheaper alternatives such as wool blends, synthetic materials, or natural fibers.
Why should you buy a stair runner?
There are multiple reasons why people choose to install stair runners, the main being safety. Whether you've already experienced falling down the stairs or not, everyone knows that stairs are dangerous when slippery. Needless to say, wood and tile stairs are the epitome of slippery. With stair runners, everyone, especially the little ones, will be safe when going down the stairs. Moreover, runners can give some character, pizzazz, and color to an otherwise boring staircase. So, if you want to create an attractive focal point in your home, you can count on stair runners to do exactly that.
Why do people install stair runners?
There are multiple reasons why people choose to install stair runners, the main being safety. Whether you've already experienced falling down the stairs or not, everyone knows that stairs are dangerous when slippery. Needless to say, wood and tile stairs are the epitome of slippery. With stair runners, everyone, especially the little ones, ...
Can you use a stair rod on a marble staircase?
That being said, stair rods are totally optional since they're only used for decorative purposes. Red Carpet On Marble Stairway.
Can you see dust on dark stair runners?
However, it's good to keep in mind that dust and fluffs are easily seen on dark runners. Light-colored stair runners are classy, but most people end up regretting this color choice because they show dirt very easily. If your staircase gets a ton of traffic, stay clear from lighter shades at all costs!
Are stair rods necessary?
Stair rods come in a wide selection of elegant finishes and designs and are perfect for adding a stylish touch to the stairway. These decorative accessories can complement your stair runners and enhance the overall look of your space. On top of that, you can get a stair rod in the same finish as other metal details in your home to create a cohesive and well-designed space.
Main Types of Stair Runner Carpet and Stair Treads
There are various types of stair runner carpet and tread options you can purchase, each with its own features and benefits.
Sizes of Runners and Treads
The size of the runner or tread you need depends on the width of your stairs. For example, if your stairs are 3 feet wide, a 27-inch-wide runner would be ideal. For stairs measuring 4 feet in width, a 32- to-33-inch runner is recommended.
Colors and Patterns
Stair runner carpet comes in a variety of colors and patterns. You’ll likely want a color that matches the current carpet in your home.
How wide should a carpet runner be for stairs?
The answer to this will depend on the width of your stairs. For stairs that are approximately 3 feet wide, we would suggest a 27-inch runner width. This width allows for good coverage so that you don't feel like you are walking on a narrow strip, ...
What is a stair runner?
The Spruce / Christopher Lee Foto. A stair runner is a piece of carpet that doesn’t cover the entire width of the stair. It is typically installed over hardwood or tiled stairs. Runners come in virtually all colors and patterns and are also available in different widths.
Why Add a Runner?
One of the most common and perhaps obvious reasons is safety. Wood or tiled stairs can be quite slippery, which can present a danger, especially when there are children, pets, or people with mobility issues in the home.
What is the best cushion for a stair runner?
The best cushion for under a runner is very thin so that it doesn’t raise the height of the runner by much. It should also be dense, to adequately support the runner so that the carpet doesn’t flex too much when walked on. A pad of one-quarter-inch thickness is ideal for under a stair runner.
Why should a cushion be narrower than a runner?
The cushion should be slightly narrower than the runner, to allow the runner to sit tightly against the stair, and ensure the underpad is not visible from the side of an open staircase.
Where do you put a rod on a stair tread?
Rods are an optional accessory to stair runners. A metal rod is installed at the back of the stair, where the riser meets the tread —such as pictured above. The rod is not actually holding the runner in place. The runner is installed using staples, tackless, or whatever other means deemed appropriate by the installer.
What is a good pattern for stairs?
Non-geometric designs, such as abstracts or the floral designs commonly found in Oriental rugs, are a good choice of pattern for stairs. These designs don't require the same precise matching as geometrics and therefore create an attractive finished look.
How wide should a stair runner be?
This width is available at most hardware stores, home improvement centers and carpet stores. Since most stairs have a 36- to 42-inch width , a 32-inch stair runner still provides 2 to 5 inches of visible wood floor space on either side of the runner.
How wide should a runner be for a staircase?
The company also notes that it is common to install a runner that is at least 32 inches wide if the runner itself is 18 to 20 feet long. The added width helps balance the length and height of the staircase.
How much space does a 32 inch stair runner have?
Since most stairs have a 36- to 42-inch width, a 32-inch stair runner still provides 2 to 5 inches of visible wood floor space on either side of the runner. Advertisement.
Why do you need a carpet runner for stairs?
If you have wood stairs in your home, you can install a carpet runner to protect the stairs from scratches, weathering and discoloration from sun exposure. A stair runner also provides traction and prevents injuries due to falls.
