DRYLOCK is a wonderful product if you need to waterproof your cement or bare masonry. However, it’s only as good as its application. By taking the time to apply the DRYLOCK correctly, you will ensure that the application will last you a long time. However, if you rush through it, you run the risk of it not doing the job that it’s intended to do.
Is drylock any good?
Yes, Drylok helps to prevent the development of mold and mildew because it is designed to prevent water from penetrating through foundation walls. The product provides an ‘inert coating’ which means it does not promote the growth of mold or mildew.
Does drylock work on wood?
It is not designed to be used on wood, but there is a simple trick to make it work very well put on a very very thin coat first, then apply sucessive coats a little thicker each time. I would not cut corners when applying Drylok, especially on the bottom half of the enclosure. Click to see full answer.
Can you spray on drylok?
You can spray drylok but not with a homeowner or light duty commercial airless. It takes a stout pump like a Graco 733 and even then you need to remove the filters. When sprayed it still needs to be backrolled to work the paint into the pores. Additionally, how long does it take for Drylok to cure? Dry time: 2-3 hours.
Should I use drylock on my basement walls?
When moisture penetrates a basement or other room that has masonry walls, you can use DRYLOK® paint on the walls. This product not only provides a barrier for the encroaching water but it also eliminates the breeding environment for mold and mildew. Can you apply waterproofing over paint?
Does DRYLOK really work?
Drylok is an indoor waterproofing paint, and while that has been mentioned several times, it is a crucial detail. Waterproofing your basement from the inside may be cheap, but it is by far the least effective way of waterproofing your basement, and this is because it never stops the source of the water.
Is there anything better than DRYLOK?
per gallon of coverage, Sani-Tred can waterproof larger surfaces using less material and lowering your costs. Not only does Sani-Tred actually waterproof your basement, it has better coverage for less money in the long run. Drylok appears to be the more economical choice.
How long will DRYLOK last?
How long will DRYLOK® Masonry Waterproofer maintain its effectiveness? A. When applied according to directions, DRYLOK® Original Masonry Waterproofer is warranted for 10 years, DRYLOK® Extreme Masonry Waterproofer is warranted for 15 years, and DRYLOK® Floor & Wall Masonry Waterproofer is warranted for 7 years.
Should I Drylock my basement walls?
Of course, the reason you need to seal any basement foundation is because the foundation is porous. Moisture can come through the concrete, stone or block and cause a lot of problems under the house so sealing it is an integral part of the process in making sure your basement is clean and dry.
What is the best basement waterproofing sealer?
When sealing basement floors and foundation walls the best concrete sealers to use are the Lithi-Tek 4500 primer followed by the Siloxa-Tek 8510 waterproofing sealer. If you are going to be installing flooring in the basement, it is best to use a moisture vapor barrier coating like the Vapor-Tek 440.
Which is better Drylok or Zinsser?
Here we are at one of the most important differences. The waterproofing ability of Zinsser Watertite and Drylok will affect the purchase decision of many. In this aspect, Zinsser Watertite seems to be the better choice. As per its claim, it can withstand water pressure of 10 to 34 lbs.
Will DRYLOK stop leaks?
DRYLOK® penetrates tiny pores in the masonry to form a watertight coating that stops leaks. DRYLOK® will stop water from penetrating the inside of masonry walls even during the most torrential downpours.
How many coats of DRYLOK should I do?
TWO COATSAPPLY TWO COATS. Allow to dry 2 hours between coats. The second and subsequent coats may be applied by roller, brush, or spray.
Can DRYLOK be used on damp walls?
Drylok's Powdered Masonry Waterproofer and Fast Plug must both be applied to wet walls. Drylok's Original Masonry Waterproofer, Extreme Masonry Waterproofer, and Floor and Wall Masonry Waterproofer can all be used on slightly damp surfaces, but it isn't recommended. Drylok mustn't be used on uncured concrete.
Do you need to prime before using DRYLOK?
Q. After applying two coats of DRYLOK® Latex Masonry Waterproofer, do I have to prime before putting on a decorative paint? A. No, DRYLOK® will act as the primer for any good quality latex paint.
Can you put DRYLOK over mold?
Yes. You can paint Drylok over mold, however it should only be painted over once the necessary steps have been taken to treat and remove the underlying issue.
What's the difference between DRYLOK and DRYLOK extreme?
The main difference is that Drylok Extreme has better water resistance than Drylok Original (15 PSI as opposed to 10 PSI). Drylok Extreme is wind resistant, includes biocide, and has a longer warranty. Additionally, the Extreme has a smooth texture, while Drylok Original offers a sandy texture.
What is the difference between DRYLOK and DRYLOK extreme?
The main difference is that Drylok Extreme has better water resistance than Drylok Original (15 PSI as opposed to 10 PSI). Drylok Extreme is wind resistant, includes biocide, and has a longer warranty. Additionally, the Extreme has a smooth texture, while Drylok Original offers a sandy texture.
Does DRYLOK cause mold?
The product provides an 'inert coating' which means it does not promote the growth of mold or mildew. Additionally, Drylok Extreme consists of an additive called 'mildewcide' which acts to further prevent the potential for mold or mildew to grow under paint.
Is DRYLOK good for exterior walls?
Can DRYLOK® be used outdoors? A. Yes, DRYLOK® can be applied to interior and exterior masonry surfaces – above or below grade.
Is there a sealer for concrete?
There are two main types of concrete sealers: film-forming sealers and penetrating sealers. Film-forming sealers include acrylics, epoxies, and urethanes that form a coating on the surface of the concrete. Film-forming sealers, especially acrylics, are more susceptible to wear and will need to be reapplied frequently.
What is a dry lock waterproofer?
It is a ready-mixed, low odor formula that protects against water while allowing moisture to pass through the concrete naturally. It is easily applied with a brush and a roller (like pretty much all concrete sealers), and it has a low VOC content.
Is Dry Lock waterproofing the same as Behr?
However, that does not necessarily mean it is the best, or even the most cost effective, option. The Dry-Lock Masonry Waterproofer has a lot in common with the Behr Masonry Waterproofer.
Is dry lock waterproofer a paint?
However, the Dry-Lock Masonry Waterproofer is a latex-based paint-type of surface protection. It isn’t even as strong as Behr’s offering, which is an acrylic solution.
How much does Drylok cost?
Drylok is a leading competitor in the indoor basement waterproofing business. The Drylok product has gone through many trials and tests throughout the years. While Drylok is a top competitor, that means it does not come cheap. According to the official Drylok website, a 10x10 square will require two coats totaling slightly over 2 gallons. At Home Depot, one single gallon of Drylok original formula costs around $25*, which means it is roughly $50 for a 10x10 square if you use the original Drylok formula. This price goes up for their “Extreme” formula, costing approximately $65* for a 10x10 area if you want stronger absorption for an impenetrable barrier. If you are lucky, you will only need to seal a small space, but in most cases, it is better to seal the entire basement at one time. The average size of a basement is 1500 square feet and 8 feet tall, with the average shape being rectangular. With some simple math, that means the cost to seal all four walls with Drylok’s original formula ultimately would be roughly $680*. Before you take on this task yourself, give us AK Waterworksa call for a free estimate. *Prices as of October 2020
What is Drylok paint?
Drylok is an indoor waterproofing paint , and while that has been mentioned several times, it is a crucial detail. Waterproofing your basement from the inside may be cheap, but it is by far the least effective way of waterproofing your basement, and this is because it never stops the source of the water. Most of the time, the water comes from a flawed drainage system, an unsealed exterior basement, or a lack of draining soil around the basement’s exterior. This means that the Drylok will be acting as a band-aid while never really fixing the cause of the problem.
How many coats of Drylok for 10x10?
According to the official Drylok website, a 10x10 square will require two coats totaling slightly over 2 gallons. At Home Depot, one single gallon of Drylok original formula costs around $25*, which means it is roughly $50 for a 10x10 square if you use the original Drylok formula.
Can you use Drylok on a basement?
While Drylok sounds hugely tempting to use, several negative factors come with it. The best thing you can do for your basement is never to start DIY-ing it at the beginning of your project. Instead, consult a professional who has been working on basements for a long time and has experience doing it. AK Waterworks will know precisely the type of ...
Is Drylok waterproofing paint good for basements?
In case you don’t know , it is a waterproof ing paint for your basement that works together with the pores in the concrete or brick walls. Drylok creates a sealed surface to prevent water from entering your home, thus completely preventing a wet basement. While this product may sound excellent so far, it may be too good to be true as there are some ...
Does Drylok waterproofing sealant last forever?
As Drylok is an indoor waterproofing sealant, it does not last forever. Drylok comes with a 7-15 year warranty, and while this is a very long time, it does mean that you may have to renew this sealant again in the future. Give AK Waterworks a call to discuss a more permanent option.
What is Drylock waterproofing sealer?
If you have been talking with a home improvement professional and he or she mentions Drylock or Drylok, what he is talking about is a basement waterproofing sealer that is put on the concrete. This product is designed to prevent water from seeping through the foundation and walls in the basement. Drylock is applied to the walls and floor with a brush or roller and many times homeowners will use this as a do-it-yourself fix to wet walls and floors.
Can you drylock a wet wall?
Drylock is applied to the walls and floor with a brush or roller and many times homeowners will use this as a do-it-yourself fix to wet walls and floors. The problem with this DIY approach is that often the root issue of the water seeping into the basement has not been addressed.
What is Drylok used for?
That’s certainly in the DRYLOK® skill set, but DRYLOK® products are useful in a wide variety of residential and commercial applications including (take a deep breath): Living spaces, laundry rooms, dry storage, fish ponds, retaining walls, bird baths, stenciling on concrete floors, painting concrete ponds, waterproofing cisterns, and sealing and protecting walkways and decorative garden statuary.
What is Drylok waterproofing paint?
DRYLOK® Masonry Waterproofing Paint is available in various formulations, including Original Latex, Clear Floor and Wall and Extreme. All varieties are designed to withstand hydrostatic pressure, meaning they stop water that is below grade from penetrating foundation walls. Even more impressive, DRYLOK® products are formulated to stop hurricane-forced wind driven rain! DRYLOK® products accomplish this by actually penetrating the surface of the masonry, forming an impenetrable barrier.
What was easier to paint rough surfaces with?
Painting the rough surface was easier with a special brush and roller.
Is Phil a slow learner?
Yes, he is a slow learner. Future projects include a teardown restoration of his 1965 BMW motorcycle, and designing and building a kick-ass playhouse for his grandsons. Phil loves spending time outdoors, hanging out with family and friends, cool tools, and a cold IPA when beer o'clock rolls around. Reader Interactions.
Can you use a drylok paint brush on walls?
The beauty of DRYLOK® products is that they require no special skills to use. If you can hold a wire brush and wield a paint brush, you can easily finish your walls with DRYLOK® masonry waterproofing paint. As with most DIY projects, good prep is the key to a quality job. Invite some friends over for a BYOWB (Bring Your Own Wire Brush) party, and have some fun! Here’s a short video from the folks at DRYLOK®, showing the whole process:
How long to wait to paint drylok?
A. Absolutely. In fact, DRYLOK ® makes an ideal base coat. After applying DRYLOK ®, wait at least 24 hours and then paint it with a good quality latex top coat.
Can you use Drylok over paint?
A. Yes and no. DRYLOK ® may be used over any other cementitious-type waterproofing paint in good, repaintable condition, either inside or outside. However, DRYLOK ® cannot be used over an oil or latex-based paint on the inside of a building. DRYLOK ® will adhere to these paints, but if it cannot penetrate into the pores of the masonry itself, it will not waterproof the surface.
