what are the parts of a faucet

• Gaskets. Gaskets (or O-rings) make sure that the faucet's joints are watertight.
• Escutcheons and Flanges. These are installed behind or under your faucet in order to cover the hole for the pipe or valve.
• Aerators and Adaptors.
• Handles, Levers and Controls.
• Faucet Stems.
• Washers.
• Stem Screws.

Full Answer

What should I look for in a faucet?

• Sink-mounted faucets. There are many different kitchen faucet and sink designs, but they are not always compatible. ...
• Deck-mounted faucets. With these the faucet mounts directly to the countertop and not the sink. ...
• Wall-mounted faucets. Take care when placing a wall-mounted faucet to make sure it will work together with your sink. ...

Which are the best faucets?

Why Is Bathroom Faucet A Top Needed?

• Avoid Rust Penetration. A high-end bathroom faucet engages a rustproof addition to eliminate the rust outer and within the tube.
• Enhance Low Pressure Of Water. A weak operator with sparsely flow can ruin your bathroom experiences. ...
• Limit Stopping Working. ...
• Not Frequent Dripping And Leaking. ...
• Not Making Loud Noise. ...

What are the parts of a kitchen sink faucet?

• Faucet Body: A device used for transporting water from a plumbing system.
• Adjusting Ring: A seal that can be made out of various materials and used to ensure that the faucet’s joints are watertight.
• Spout Assembly: Parts used to control the spout.
• Faucet Lever: Lever used to control turn tap on and off.
• Spout: The opening where water flows out of.

More items...

How to repair a faucet?

Loosen the Allen Screw

• Then turn off the water supply to the dripping faucet.
• Lift the handle and pry off the decorative cover to expose the Allen screw.
• Turn the screw counterclockwise until it's loose enough to lift the handle up from the stem. ...

What is the name of the part on a faucet that the water comes out?

Spout: The opening where water flows out of. Aerator: Small mesh screens placed on the end of faucets and used to regulate the flow of water into multiple small streams so that the volume of water that flows from the faucet would be significantly reduced.

What is the piece next to the kitchen faucet called?

Reddit user @dominostracker wondered the exact same thing, and according to a few wonderful human beings who took the time to answer, that thing is an air gap. It helps prevent dirty water from the dishwasher flowing back through the pipes and contaminating the clean water.

What are some of the parts needed for a faucet repair?

Faucet Parts & RepairStems & Cartridges.Aerators.Sprayers & Hoses.Washers & Gaskets.O-Rings.Index Caps.

What is faucet stem?

The stem is all the moving parts within a faucet. It has different functions, including how much hot and cold water you receive, and lets you change the water's temperature. Each handle has its own stem assembly. Plumbers often identify faucets by the type of stem system they use.

What is thing on sink next to faucet?

The device is usually a small cylinder sitting on your cabinet top near the sink and faucet. As your dishwasher cleans your dishes, the waste water is pumped out of the dishwasher and carried by a hose to the air gap.

What holds a faucet in place?

A locking nut or screws keeps a faucet firmly attached to the sink. Locate this nut and use the basin wrench to loosen and unscrew it. This nut can prove difficult to remove, depending on how long the old faucet has been in use.

How do you fix a dripping faucet?

1:382:54How To Fix A Dripping or Leaky Double Handle Faucet - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst take off the handle. Then unscrew the valve stem on the stem remove the old gasket screw. AndMoreFirst take off the handle. Then unscrew the valve stem on the stem remove the old gasket screw. And seat washer. Apply some plumbers grease.

Why is my faucet dripping?

The most common sources of a leaking faucet – a worn out washer or gasket, a loose O ring, corrosion in the valve seat – can be detected and fixed easily with most faucet repair kits.

What is a faucet body?

Faucet Body: A device used for transporting water from a plumbing system.

What is a spout assembly?

Spout Assembly: Parts used to control the spout.

How many different types of wine glasses are there?

Learn about the 18 different types of wine glasses with photos and illustrated charts showing the shape and style of each type of wine glass. Includes different types of red, white and dessert wine glasses.

The 9 Parts of an Outdoor Faucet

Let’s take a look at the nine different parts that make up an outdoor faucet to give you a better idea of what it entails and how they work together.

Things to Consider

If you prefer to complete any repair and maintenance jobs yourself, knowing what to look for and how to pinpoint issues with outdoor faucets can be helpful.

Frequently Asked Questions

Check out the frequently asked questions below for more information about outdoor faucets and related topics.

So, What Are the Parts of an Outdoor Faucet?

Although an outdoor faucet contains nine different parts within this small object, it isn’t a complicated system. Many DIYers can troubleshoot and repair any problems with their outside water source by investigating some common issues.

What is the spout of a faucet?

The spout of a faucet is the part where the water flows out from, and it is also the part that helps to dictate and define the style of the faucet. The spout is usually the most noticeable part of a faucet so if you’re buying a new one you’ll want to look for a faucet with a spout that reflects the style of your home.

What is the handle on a faucet?

This is the part of the faucet which operates the valve mechanism inside, and can therefore control the water flow. When the valve is closed the faucet will be turned on, and when it is open the water will flow through freely.

How does an aerator work?

It will usually be made from a metal mesh, and its job is to divide the single stream of water coming out of the faucet into several streams of water. This actually reduces the amount of water flowing out of the faucet while simultaneously giving the impression of high pressure. This helps to cut down water bills and make the faucet more energy-efficient, saving both money and the environment. An aerator also works to reduce the likelihood of splashing in the sink.

What is a cartridge valve?

Most kitchen faucets will contain the entire valve mechanism in a cartridge, which makes repairing broken valves much easier because a cartridge can simply be swapped out for a new one rather than having to mess around with numerous washers and other small pieces.

Why does my kitchen faucet break down?

When the kitchen faucet breaks down or develops a fault, it needs rectifying quickly so as not to inconvenience all members of the household too much. In most cases, if the flow of water is reduced or non-existent, this points to a problem with the cartridge valve. An eroded or cracked valve is the most common issue which occurs in kitchen faucets, ...

What is an escutcheon on a faucet?

Escutcheon. The escutcheon is essentially a mount where the faucet is fixed to the countertop. It is a decorative feature which finishes off the look of the faucet and covers up any holes which were required to install the faucet. The escutcheon will match the rest of the faucet in terms of material, and might be stainless steel, plastic, zinc, ...

Why move faucets to the side of the sink?

This is useful for moving the faucet to the side of the sink when you need to wash large items, or for spraying water in different areas. If you have a double sink bowl it will also enable you to move your faucet from one bowl to the other.

What is the part of a faucet that breaks up water flow into multiple streams?

Illustration by Harry Campbell. Starting at the tip of the faucet, this is the part (typically made of mesh) that breaks up the water flow into multiple small streams to dilute the water with air.

What is a spout on a faucet?

The spout is the part of the faucet that most people notice first; it’s the part that delivers water from the body to the sink and it can be distinctive in its design. A straight spout provides a long reach with a low profile.

What material is used for Kohler faucets?

Common Materials: Brass, Stainless Steel, Plastic, Zinc. Photo by Courtesy of Kohler. Standard options for the faucet material include brass, stainless steel, plastic, and zinc. Brass is the most popular choice. It’s durable and easy to cast, and companies offer a wide variety of models and finishes.

How much does a kitchen faucet cost?

You can purchase a kitchen faucet for as little as $15, although we recommend spending more than that to ensure its durability. After all, if you’re going to be using your kitchen faucet so frequently, it’s best to buy one that’ll last.

What is the most used part of a kitchen?

Your kitchen faucet is one of the most-used parts of your kitchen. Whether you’re buying or looking to replace parts, here’s what you need to know about it. By Nancy Fann-Im. Of all the working parts in a kitchen, the faucet might be the one we use the most. According to the EPA, each American uses an average of 88 gallons of water a day, ...

What are cartridge valves made of?

Some valves are made of plastic or metal, but the best ones house a pair of hard, smooth ceramic discs that rarely leak and aren’t affected by hard‑water deposits. The discs can crack if they snag any debris, so make sure to flush your supply lines before installing the faucet. (Supply lines connect the house’s hot and cold-water pipes.)

What is the least durable faucet?

Plastic or zinc faucets are the least durable option. They may be designed to look like brass, but they’re made from a much cheaper material. The best way to tell them apart is to pick them up—plastic and zinc are light, while brass has heft to it.

What is the name of the part of a faucet that is connected to a hose?

Spigot. Some people refer to the entire body of a faucet as the ‘spigot’, but technically a spigot is the name for just the end part of a faucet where the water flows out from. The spigot can be connected to a hose pipe to allow easier watering of flower beds and lawns, or to fix the outdoor faucet up to a sprinkler system.

What is the handle of an outdoor faucet made of?

The handle of an outdoor faucet is the uppermost part, and it will be made from metal but is sometimes coated in plastic or silicone to make it easier to grip. The handle is most frequently, though not always, shaped like a wagon wheel because it is operated by turning it. Alternatively, it could be winged, with two or more wings extending out ...

How does a faucet spindle work?

The spindle needs to be working properly in order for the faucet to function because it is this part of the faucet which helps to control water flow. When the handle on the faucet is turned, the spindle will be pushed in either a downwards or upwards direction, which will either open or close the valve, resulting in water flowing freely out of the spigot, or being stopped from coming out.

Why is my outdoor faucet leaking?

Leaking outdoor faucets, especially on older properties, are quite common, and are often caused by deterioration of the valve system over time. If your faucet is leaking from the spigot, the most likely cause is the breaking down of the valve, and though this can be replaced it is usually less hassle and equally cost-effective to just replace ...

How does an outdoor faucet work?

Just like a kitchen faucet, an outdoor faucet most commonly works by a mechanism that controls the flow of the water. This mechanism takes the shape of a valve, which can be a gate valve, ball valve, or globe valve. When the handle on the faucet is turned it will cause the valve to open or close, either allowing water to flow through ...

Why do we call an outdoor faucet a spigot?

An outdoor faucet can also go by the name of spigot, or hose-bib because it is the spot where you would fix an outdoor hose. Most people are not concerned by the parts of an outdoor faucet until they are faced with a leak, and then it is essential to understand the inner workings of the faucet in order to diagnose the source of the leak and fix the problem. Here, we detail all of the parts of an outdoor faucet and how they work.

What happens when you turn the handle on a faucet?

When the handle on the faucet is turned, the spindle will be pushed in either a downwards or upwards direction, which will either open or close the valve, resulting in water flowing freely out of the spigot, or being stopped from coming out.

What are the parts of a faucet?

What are the different parts of the common faucet? 1 Valve – Controls the hot/cold aspects of your water, similar to the handles, but is completely internal, depending on the type of Valve you might also have a cartridge as well. 2 Cartridge – The cartridge regulates water flow and temperature before it comes into contact with the valve, helping you control your water before you turn the handle.

What is the primary piece of a faucet?

The common faucet comes in a wide variety of parts including different washers that hold it together, but the primary parts are listed below: Faucet –The primary piece of your faucet, it is where water comes out from depending on it’s position in your sink. It is also the most notable part of your sink. Handles – Turns the water on/off .

What is a ceramic disc faucet?

A ceramic disc faucet is a faucet that consists of both a wide cylindrical body and a single lever. Inside, it contains a wide cartridge housing unit with two ceramic discs that slide over one another to control water flow and temperature. The motion of the two discs controls the water volume by either opening or restricting the pathway of the water.

What is the movement of a faucet handle?

Movement of the faucet handle moves the sleeves of the cartridge, aligning and blocking holes to help control the supply of water. So while it may appear very similar to a compression faucet, the cartridge action makes the handles of the faucet much smoother and easier to turn, unlike that of a compression sink.

What is a valve in water?

Valve – Controls the hot/cold aspects of your water, similar to the handles, but is completely internal, depending on the type of Valve you might also have a cartridge as well.

What is a compression valve faucet?

Faucets that have compression valves are the type that you may find the most commonly around your bathroom and older bathrooms you may encounter as they have been around since the advent of plumbing. Cheap and relatively inexpensive, these faucets are unfortunately prone to leaks and will require occasional maintenance.

Where is the ball faucet located?

Found commonly in kitchen sinks and are among the first type to be completely washerless, ball faucets are identifiable by their single handle at the top which can move over a round ball shaped cap at the base of the faucet spout.

Where does the water flow from a kitchen faucet?

These are perhaps the best known of all the kitchen faucet parts, and are usually attached directly to the sink. The water flows out of the end of the faucet stem.

Why are kitchen faucets attached to the sink?

These kitchen faucet parts are attached to the actual faucet in order to alter the flow of the water, making them more environmentally sound. These are used to turn the taps on and off. These are perhaps the best known of all the kitchen faucet parts, and are usually attached directly to the sink. The water flows out of the end of the faucet stem. ...

What screws attach the washers to the stem of a faucet?

Stem screws, also known as bibb screws, attach the washers to the end of the faucet stem.

What is an O-ring on a faucet?

Gaskets (or O-rings) make sure that the faucet’s joints are watertight. Gaskets can either be rubber or metal. These are installed behind or under your faucet in order to cover the hole for the pipe or valve.

What is an escutcheon plate?

Escutcheon Plates. Primarily used as kitchen faucet parts, the escutcheon plate is more for appearance than for usability. The plate is used to cover up unused holes in your countertop. For example, if you were to install a single-hole faucet assembly on a sink that accommodates a three-hole assembly, the escutcheon plate can be used to cover ...

What is shower trim?

Shower trim includes all the components of a shower that can be seen, like the head, arm, and handle. Trim kits will include all the parts you need for your shower assembly.

Can you replace a kitchen faucet handle?

Most handles can easily be replaced if need be. There are a wide variety of faucet handles to choose from. Remember that kitchen faucet parts will tend to be more visible to guests so that is an important consideration. If you want to replace the handle only, the best choice is to find the same handle type from the same manufacturer as your current ...

The 9 Parts of An Outdoor Faucet

• The vast majority of people will have used a bathroom or kitchen faucet countless times without thinking about the components that make it work. By looking at all the components that make your faucet, you will better understand how it works and how to diagnose specific problems wit…

See more on plumberspot.com

Things to Consider

Frequently Asked Questions

So, What Are The Parts of An Outdoor faucet?