What is a good alternative to bar and chain oil?
What are some good bar oil substitutes?
- Motor Oil. Being the most common ‘go-to’ substitute oil because of its lubricating properties, you can see why it is a popular solution.
- Vegetable Oil. You can call this nature’s motor oil. ...
- Canola Oil. ...
- Second-hand or drained motor oil. ...
- Second-hand or drained hydraulic fluids. ...
- Diesel motor oil. ...
What is a good substitute for bar oil?
What can be used in place of honing oil?
- Vegetable oils. The first substitutes that you can use are different varieties of vegetable oils. ...
- Mineral oil. If you don’t want to end up wasting vegetable oil that can be quite expensive and is very valuable for cooking your food, you may want to use ...
- Industrial cleaner. ...
- Glass cleaner. ...
- Water. ...
What is the best oil for a chainsaw bar?
- Lubricates the Bar and chain for low friction and Smooth movement of the chain around the Bar
- Bar and chain oil is required for use with the Toro Perplex 40V Max 14 in. 40-Volt chainsaw (51880 & 51880T)
- One Quart Bar and chain oil
- Genuine OEM Toro parts
- Pour directly into your Toro chainsaw
Can you substitute bar chain oil for transmission fluid?
Traditionally, chainsaws have used bar and chain oil to address this issue. However, many people nowadays are actively looking for a substitute for this option. Potential replacements for bar and chain oil may include canola oil, motor oil, and hydraulic fluid. Canola oil can be used as a substitute for bar and chain oil.
What can I use if I don't have bar and chain oil?
Chainsaw Bar And Chain Oil AlternativesMotor oil. If you find yourself in a situation where you need to use your chainsaw but you don't have any of the correct oil, one of the obvious options is motor oil. ... Vegetable oil. ... Canola oil. ... Drained hydraulic fluid.
What oil can you use instead of chain oil?
Advantages of replacing chain oil with vegetable oil: Environmentally friendly – Using vegetable oil as chain lubricant poses no threat to the environment. Effective – Vegetable oils have natural properties including good lubricity, resistance to shear, a high flash point, and a high viscosity index.
Can I use regular oil instead of bar and chain oil?
If your manufacturer's bar and chain oil is unavailable, you can use SAE 30 weight motor oil to lube your chain during the summer and SAE 10 weight during the winter, according to the University of Missouri Extension.
Can you use old motor oil for chainsaw bar?
It's a way to recycle the oil. It cuts the same with old oil or new." We made a demonstration video you can check out at http://www.mcall.com/onthecheap. Terry uses the old oil as a substitute for bar and chain oil, which lubricates the bar so the chain can spin smoothly around it.
Can I use 10W40 oil in a chainsaw?
Can I Use 10W40 Oil for Chainsaw Bar Oil? Yes, it can be used but not as a good option for bar oil. 10W30 and 10W40 motor oils are almost similar and both can be used as an alternative for chainsaw bar oil.
Can you use motor oil instead of bar oil?
While motor oil is not the best substitute for chainsaw bar oil, it will work as a temporary measure if find you have no other option. The downside of motor oil is that it's not sticky enough to stay on the bar and chain. So, when you're using the chainsaw, the motor oil will fling off as you cut and make quite a mess.
Can used motor oil be used as bar oil?
7:138:29Can Bar & Chain Oil be used as Motor Oil? Let's find out! - YouTubeYouTubeStart of suggested clipEnd of suggested clipInside this filter soap doesn't appear that there's been any damage caused by the bar and chain oil.MoreInside this filter soap doesn't appear that there's been any damage caused by the bar and chain oil. So as barn chain oil it gets substitute for motor oil I don't really think it is because we saw
Can engine oil be used as chain lube?
Engine oil cannot be used as chain lube and for many reasons. It might do the job temporarily but it will cause problems later on. Number one being the viscosity of engine oils. The thickness of the oil will draw more dirt on the chains.
Can I use 10w30 instead of bar and chain oil?
Can I Use 10w30 for Chainsaw Bar Oil? Yes, though it is not ideal for use in the winter. A 10w30 oil is multi-weight, meaning it will perform well in cold and heat. Yet 10w30 weight motor oil will be very tacky and viscous once the chainsaw heats up and starts to run.
Can you use vegetable oil for bar chain oil?
Can you actually use vegetable oil as a substitute for chainsaw oil? The short answer is you can but it's not without some pros and cons of which you should properly consider before adding some cooking oil into your chainsaw! First up, let's consider why some woodsmen and lumberjacks may want to do this.
Can you use wd40 on chainsaw?
To remove grease from the chain links, you will need to soak it in a mix of warm water and degreasing agent. We recommend using WD-40® Specialist® Fast Acting Degreaser and soak it for 10 to 15 minutes.
Can I use any 2 stroke oil in my chainsaw?
Can I use any 2 stroke oil in my chainsaw? No, you can't use any 2-stroke oil in your chainsaw. Some 2-stroke oils are built for motor oils, and this might damage your chainsaw. Also, 2-stroke oils for an air-cooled engine are different from a water-cooled engine.
What can I use if I don't have a bar and chain oil?
There are many oils that work well as bar and chain oil substitutes. You’ll have to experiment with what works for you, but some good options inclu...
Can you use 10w30 for bar and chain oil?
Certainly not. You’ll want a thinner oil for bar and chain oils, as the thicker oil won’t be able to penetrate small spaces between parts of a mach...
Do Electric chainsaws need bar oil?
Yes. Every electric chainsaw needs to have a bar oil reservoir that is made especially for the manufacturer, size, capacity, and type of unit. In o...
How to oil a chainsaw chain?
The thing to remember when using this product is not to overdo it. A thin coat of oil on the bar and chain will give you just enough lubrication to...
What is Chainsaw oil?
Chainsaw oil is a type of lubricant used for reducing the friction between the chain and the bar. It is a light oil that coats the blade of the cha...
Do you have to use bar and chain oil?
The purpose of bar and chain oil is to lubricate the drive mechanism of a chainsaw. If you don't use bar and chain oil, it will be tough to start y...
Can you use a Chainsaw without oil?
You know the old saying, "use it or lose it"? Well, this is the same with your chainsaw. The more you use it, the better it will work when you need...
Can you use 2 cycle oil for bar and chain oil?
Yes, you can use two-cycle oil for bar and chain oil. 2 cycle oil is excellent for many different chainsaw applications and other power tools, like...
How much bar oil should a chainsaw use?
Chainsaw bar oil is a necessary lubricant used to protect and extend the life of the chain. Bar oil is simply a type of oil specifically designed t...
What grade of oil is used on a chainsaw Oiler?
It depends on the type of saw. Typically, a heavy-duty chainsaw has a different grade of oil than a lighter-duty saw. Most manufacturers recommend...
How do you know if your chainsaw is oiling?
There are a few easy ways to tell if your chainsaw is oiling properly:· It should start relatively quickly with no kicks or stalls.· There should b...
What kind of oil does electric chainsaw use?
There are a lot of oils that an electric chainsaw can use. But you can use any type of oil that has been approved for use with an electric chainsaw...
Does chainsaw chain oil go bad?
The answer is yes; chain oil does go bad. According to manufacturers, it can be stored for a maximum of 3 years, with the best quality lasting for...
Do chainsaw Chains go bad?
I've been using chainsaws for long time, and I've come to find that chainsaw chains will go bad after only a year or two. I know this because a cha...
What can I use for chainsaw bar oil?
You should be able to find this product in most hardware stores. It is sold in small cans, usually around $5-10 depending on where you go. This oil can be put on your chainsaw bar with both hands or by dipping it directly into the canister.
How to make 100% biodegradable bar and chain oil?
This procedure has been tested and works well in several cases, having an essential material: vegetable fat (vegetable oil). The essential oils and fats we will use are sunflower oil, rapeseed oil, and olive oil.
Motor Oil
Motor oil is definitely the most widely available substitute for bar and chain oil. It is an awesome lubricant and it comes pretty cheap in a small bottle.
Vegetable Oil
Vegetable oil is another great alternative. It is affordable, and it is a great lubricant. Also, vegetable oil is biodegradable and environmentally friendly. And if you are in need of a greener oil to use in a specific environment where being eco-friendly is necessary, vegetable oil is the best.
Canola Oil
No, canola oil is not the same as vegetable oil. Canola oil can be used as an alternative to bar and chain oil, absolutely, but it is not the same as vegetable oil. Canola oil comes extracted from rapeseeds, whereas vegetable oil is generally made from a mix of plants. But yes, they are quite similar.
What can I use instead of chain oil?
Most preferable bar and chain oil substitute for chainsaw is motor oil. Besides, you can use veggie oils, hydraulic fluid even diesel as alternative lubricator for your saw. Today I’ll be explaining what to use when and how and some bonus tips for everyday chainsaw user.
How long does it take for a chainsaw chain to go bad?
I’ve been using chainsaws for long time, and I’ve come to find that chainsaw chains will go bad after only a year or two. I know this because a chain that’s been in use for one year will have lost about 1/3rd of its tension and become much more likely to break when cutting rigid materials. Chains that have been in use for two years will have lost about 2/3rds of their tension and will be more likely to break when cutting rigid materials.
Why do chainsaw chains need oil?
Chainsaw chains need oil because they are made of metal. Oil would provide lubrication for the chain to glide more efficiently, increase the chain’s lifespan, and prevent the generation of friction. Some chainsaw chains are greased with oil from the factory, but it doesn’t last long.
Why does my chainsaw stop working?
The bar oil lubricates the chain and bar to make it easier to cut through wood. Without the oil, the blade will start to heat up, and it will swell up as it heats up. This will cause the chainsaw to stop working, and then it will break. The blade will either get stuck in the wood or jam up, and the chainsaw will stop.
What is a chainsaw bar?
A chainsaw bar, also known as a chainsaw guide or a chainsaw blade, is a curved metal bar responsible for protecting the cutting element’s motion (the saw-chain) of the chainsaw during operation. It sits in the chainsaw’s chains and spins the chainsaw’s chain. When attached to your chainsaw, it improves the overall performance of the chainsaw.
Why do you need bar and chain oil?
The purpose of bar and chain oil is to lubricate the drive mechanism of a chainsaw. If you don’t use bar and chain oil, it will be tough to start your chain saw, it will gum up and be a pain to use, and it will emit a black smoke that can irritate your lungs, giving you a headache and a sore throat.
What are some examples of hydraulic fluid?
If you have access to fluid machinery, i.e., hydraulic pumps, excavators etc. hydraulic oils for those machinery would be available to you. Also, the oil used for braking systems in automobiles is another example of hydraulic fluid.
What Oil Can Be Used for Chainsaw Bar Oil?
Generally, chainsaws can handle a wide range of lubricants. Vegetable and canola oils work well, and automobile motor oil will too, as long as you observe the SAE ratings and use the appropriate oil weight for the season. Always use fresh, never used, oils.
Can I Use 10w30 for Chainsaw Bar Oil?
Yes, though it is not ideal for use in the winter. A 10w30 oil is multi-weight, meaning it will perform well in cold and heat. Yet 10w30 weight motor oil will be very tacky and viscous once the chainsaw heats up and starts to run. You may experience a drop in performance.
Can I Use Gear Oil As Bar Oil?
Unless you are using your chainsaw in hot conditions, gear oil is not a recommended alternative bar oil. Why? Most gear oil is at least three times more viscous than traditional motor oil and thicker than proper chainsaw lubricant. Gear oil will likely get your chainsaw running, but you will probably void your manufacturer’s warranty with extended use.
Can I Use Vegetable Oil for a Chainsaw Bar?
Yes. Vegetable oil is perhaps one of the best alternative chainsaw bar oils to use. This product is very good for the environment, releases almost no fumes on use, and is widely used by many pros as their go-to chainsaw bar oil.
What is the best oil to use instead of chainsaw oil?
Soybean oil and olive oil – both fine substitutes for bar oil – are thick and perform better in warm conditions. Sunflower oil is thinner than chainsaw bar oil itself, so we recommend using it solely in winter.
What is 10W30 oil?
10w30 oil operates as a SAE10 oil upon starting the chainsaw motor. SAE10 oil is thin and great for the winter when the air temperature makes all liquids congeal. Yet when 10w30 heats up, its multi-weight function changes the oil’s viscosity (its thickness) to SAE30. This oil weight is thick and better for summer.
What is the best oil for chainsaws?
We recommend turning to canola oil as the best chainsaw bar oil substitute on our list. Many people across the world use canola oil as a lubricant of choice over bar oil. It is cheap, biodegradable, and has a low odor. However, you’ll have to refill your bar more often since canola oil is relatively thin and not as sticky as motor oil.
1. Vegetable Oil
Vegetable oil is one of the safest alternatives available to oil your chainsaw. It is completely non-toxic and biodegradable, and can even be used to trim live trees without danger of hurting you or the plants! And boy is it cheap – you may even have it in your kitchen right now.
2. Canola Oil
Similar to vegetable oil, canola oil is another super-safe alternative. Canola is made solely from rapeseed oil and is significantly less sticky than vegetable oil. Canola clings to the chain much better when used in low temperature conditions.
3. Motor Oil
Motor oil can make a decent, last-resort oil for your chainsaw. You can find it sitting around in most people’s garages, and it has excellent viscosity and a high flash point.
4. Hydraulic Fluid (Diluted)
Hydraulic fluid is similar to motor oil in that it also has a high flash point and superior lubrication abilities. Commonly used in automotive brake systems, you may already have some hydraulic fluid in your garage.
The Last-Resort Options
Disclaimer: HealthyHandyman does not endorse the following two options; however, other users have reported success with both methods.
5. Drained Motor Oil (Diluted)
As a backup, used motor oil is a super cheap, effective way to add volume to your last bit of chainsaw oil. If you have a car, you definitely have some used motor oil!
6. Drained Hydraulic Fluids (Diluted)
Hydraulic fluid that has been drained from other machinery can be a great way to lubricate your chainsaw in a pinch, or even stretch out your usual chainsaw bar and chain oil.
Why is chainsaw bar important?
It reduces heat and friction and saves the chainsaw from being damaged. Of the numerous parts that constitute a chainsaw, the bar and chain are the most vital. They’re connected to each other and their connection pretty much determines the speed and smoothness of your chainsaw.
When to use Valvoline SAE 30?
Customers love using Valvoline motor oil. They say it's affordable with a perfect quality and they recommend using it in winter. However, in summer you should use Valvoline SAE 30.
Why is vegetable oil negative?
While this is an important feature, it has a negative point because it makes it impossible to use vegetable oil as an alternative in the cold weather.
Is canola oil good for chainsaws?
Canola oil is eco-friendly a nd it works just fine in cold weather. One interesting feature is that it used to substitute engine oil, and two-cycle oil in machinery, which means that it’ll do the job for chainsaws
When is diesel oil good?
When it’s freezing then diesel oil is what you should go for. It functions perfectly in low temperatures.
Is chainsaw meat good for the environment?
It’s a degradable option which makes it eco-friendly. It’s a good choice when you have to use your chainsaw to cut a lamb or a deer for example. It won’t poison the meat. Second, it has a high vis cosity.
Can you mix bar oil with hydraulic fluid?
Hydraulic fluid can also be a substitute. It’s petroleum-based. It’s similar to motor oil, but with lower viscosity, which means that you might need to mix it with bar oil just to make sure it’s sticky enough. It’s mainly used to avoid rustiness of vehicles.
What Can I Use for Chainsaw Bar Oil?
If you were to look in your chainsaw manual, it would tell you to use a specific brand and/or product number for chainsaw bar oil, such as:
What is a good substitute for vegetable oil?
Canola oil is another good substitute when you don’t have access to vegetable oil. It’s able to handle high heat and protect your chainsaw bar and chain from damaging friction. That is only if you keep it well lubricated while cutting. Canola oil is also better at handling lower outdoor temperatures than vegetable oil.
Why is bar oil sticky on chainsaws?
Since chainsaw chains spin at such high speeds, the bar oil that’s used in these machines must be “sticky” enough to stay on the chain as it spins around the bar. If the bar oil is not sticky, it will fly off the chain and cause friction to build up against the bar. If too much heat occurs, this will damage those parts.
Why does my chainsaw fling off the bar oil?
It also means that you’ll have to refill the bar oil reservoir more often since it will get low quicker than when using standard bar oil. Another problem with using motor oil is that it’s harmful for the environment.
Which is better for wood cutting: canola oil or vegetable oil?
Canola oil is also better at handling lower outdoor temperatures than vegetable oil. So, if you’re doing a lot of woodcutting in the colder months and need a bar oil substitute, this may be the better choice.
Does chainsaw oil slick?
Chainsaw bar oil has a certain level of “slickness” to it. This slickness keeps the chain spinning at a fast rate without getting slowed down by the fri ction that occurs when metal rubs against metal.
Does chainsaw oil wear out faster?
The lower viscosity does cause it to wear out quicker though. So, it may be better for the surrounding vegetation when droplets spread, but you’ll need to keep filling the chainsaw oil reservoir to keep up with the demands of cutting.
How to get oil to work better in car?
Motor oil is most effective when it’s warm. So, after you harvest it from your car, heat it up. This can be done easily by turning on the engine, or by harvesting it after a long journey.
What is the advantage of a chainsaw?
Another advantage is that it’s highly viscous. Viscosity means it’s able to get in between all the nooks and crannies of your chainsaw, without clogging up any of them with itself. In case you don’t know, viscous is just a scientific way of saying runny. So, if you tip a bucket of it upside down, it all will come out.
Is vegetable oil biodegradable?
Unlike motor oil, vegetable oil is biodegradable. So, once you’ve finished with it in your chainsaw, you can dispose of it, knowing that it will break down and not cause a lot of damage to the environment. This can make it a great alternative for people who are trying to cut down on their carbon footprint.
Is vegetable oil better than motor oil?
To clean it, you just have to put it through a filter. The filtration process is much quicker with vegetable oil than it is with motor oil.
Do you need a filter to use a chainsaw?
As with all the others, before you can use it, you’ll need to put it through a filter to get rid of any gunk that you don’t want clogging up your chainsaw.
Can you use vegetable oil on a chainsaw?
Vegetable Oil. If you’re trying to watch your waistline, you might cook with vegetable oil. It’s a healthy alternative to butter and is taking over America’s kitchens. But once you’ve finished cooking with it, instead of disposing of it, you could instead use it as a lubricant on your chainsaw.
Does motor oil break down?
So, it doesn’t break down naturally, meaning it stays in the environment for hundreds of years. With global warming becoming a serious threat, the ecological impact of motor oil is something you should keep in mind. On the other hand, it’s not much worse than traditional chainsaw bar and chain oil.
Why does my chainsaw mist?
Oil misting can happen with chainsaws as they run on high RPMs. As a result, the user can be affected by dermal absorption or inhalation. Canola-based chain oils contain a low amount of vapor pressure, which decreases the fume inhalation. Thus, canola oil is much safer for you.
What is the best oil for a chainsaw?
You can also buy Oregon 54-059 Chainsaw Chain Oil. It’s slightly thinner and fully light compared to other oils. It will be the best chainsaw oil to use on your loving chainsaw.
Why is used motor oil better for chainsaws?
Collecting the oil while it is still hot will make filtering much easier. Also, in this way, the oil will get much cleaner. Used motor oil can sling off the chainsaw faster than other oils. This is because used motor oil is already broken down. It doesn’t have the sticky additive that is commonly found in bar oil.
What type of oil do you use for chainsaws?
We mainly use petroleum-based motor oil for chainsaw. It needs to be refined before using on the chainsaws. However, the positive part of using petroleum-based motor oil is it gives a better grip on the chainsaw bar.
What is the best substitute for chainsaw bar?
And Drained Hydraulic Fluids. These three substitute is best for chainsaw bar besides Pole saw bar. Motor oil produces more smoothness on the chainsaw chains and vegetable oil provides natural thickness on the chain. On the other hand, Hydraulic fluids provide more brush and keep it lubricated.
How long does it take for oil to dry on a chainsaw?
After applying it on the chainsaw give it a minute to dry. The oil gives a dry grip on the chains after drying up and works perfectly on all type of chainsaws.
How to keep chainsaw from burning in summer?
During the summer season keep the chainsaw away from direct sun rays. On the other hand, keep it in a warm place away of fire when the weather is cold.
