How many pressure washer issues are there?
Where is the unloader located on a pressure washer?
Why are pressure cleaners called Allen heads?
How to release air from power washer?
How many pressure washers do I need to repair a gas engine?
Who makes the best pressure washers?
What happens if you don't unload a pressure gun?
See 2 more
How many pressure washer issues are there?
There are 20 pressure washer issues that are by far the most common.
Where is the unloader located on a pressure washer?
Check out where the unloader is located on 3 different pressure washer pumps: As you can see the unloader is located on the exit side of the pump because it allows the pressurized water to flow back through the pump when it isn’t exiting into the high pressure hose (you’re not pressure washing anything).
Why are pressure cleaners called Allen heads?
These are one of the most used tools troubleshooting pressure cleaners because most pump assemblies are fastened together with hex head screws. They are often called Allen head after the company Allen Manufacturing that started mass producing hex screws and hex wrenches (Allen wrenches/keys) to fasten them in the early 1900s.
How to release air from power washer?
Then turn the water tap on and pull the trigger gun to release water from the system at the garden hose water pressure before starting the engine or motor. This will release all the pressure from the system and allow the pump to function.
How many pressure washers do I need to repair a gas engine?
Using the below tools I’ve fully disassembled (all the way down to removing the gas engine piston seals and crankshaft) and put back together: 3 electric pressure washers and 4 gas power washers. Let’s run through the tools, where they are used and if you should buy a complete tool kit or individual tools (and from what tool brands) for repairing your pressure cleaner.
Who makes the best pressure washers?
Karcher makes all types/styles of pressure washers through their own brand and subsidiary brands including Hotsy, Shark and Landa. They are easily the biggest pressure washer maker and seller in the world. They makes models with all types of the best small engines and pumps and have an extensive rental and service network through their subsidiary brands.
What happens if you don't unload a pressure gun?
If there was no unloader valve then pressure would build inside the system (when not in use) so when you did pull the trigger it would stall the engine or explode a weak link part – probably the pressure hose o-ring.
What is backfire afterfire?
What are backfire and afterfire? Backfire is a condition described as a loud bang, poof, explosion, etc., while the engine is running or while shutting down.
Why does my carburetor backfire?
Higher than normal engine temperatures. Some carburetors can induce backfire due to the sensitivity of internal transitional passages. (This condition cannot be corrected). Possible Fixes for Backfiring: Lower engine speed slowly. Follow small engine fuel recommendations and/or switch to brands with low or no alcohol.
How to fix afterfire solenoid?
Possible Fixes for Afterfire: Allow the engine to cool by idling the engine down with proper speed (15-30 seconds) Change to a different non-alcohol or alcohol brand fuel. Ensure proper carburetor adjustment for optimal engine performance.
Can alcohol cause afterfire?
Gasoline that contains alcohol has a tendency to ignite easier, which can cause afterfire. Small engine muffler type and manufacture. Carburetor adjustment may not be properly set for correct engine performance. Anti-afterfire solenoid may not be working properly. Possible Fixes for Afterfire:
How many pressure washer issues are there?
There are 20 pressure washer issues that are by far the most common.
Where is the unloader located on a pressure washer?
Check out where the unloader is located on 3 different pressure washer pumps: As you can see the unloader is located on the exit side of the pump because it allows the pressurized water to flow back through the pump when it isn’t exiting into the high pressure hose (you’re not pressure washing anything).
Why are pressure cleaners called Allen heads?
These are one of the most used tools troubleshooting pressure cleaners because most pump assemblies are fastened together with hex head screws. They are often called Allen head after the company Allen Manufacturing that started mass producing hex screws and hex wrenches (Allen wrenches/keys) to fasten them in the early 1900s.
How to release air from power washer?
Then turn the water tap on and pull the trigger gun to release water from the system at the garden hose water pressure before starting the engine or motor. This will release all the pressure from the system and allow the pump to function.
How many pressure washers do I need to repair a gas engine?
Using the below tools I’ve fully disassembled (all the way down to removing the gas engine piston seals and crankshaft) and put back together: 3 electric pressure washers and 4 gas power washers. Let’s run through the tools, where they are used and if you should buy a complete tool kit or individual tools (and from what tool brands) for repairing your pressure cleaner.
Who makes the best pressure washers?
Karcher makes all types/styles of pressure washers through their own brand and subsidiary brands including Hotsy, Shark and Landa. They are easily the biggest pressure washer maker and seller in the world. They makes models with all types of the best small engines and pumps and have an extensive rental and service network through their subsidiary brands.
What happens if you don't unload a pressure gun?
If there was no unloader valve then pressure would build inside the system (when not in use) so when you did pull the trigger it would stall the engine or explode a weak link part – probably the pressure hose o-ring.
