Product Description. The Moen Balancing Spool is a genuine Moen replacement part for Moentrol One-Handle tub and shower faucets. This chrome replacement Balancing Spool allows users to replace a faulty balancing spool that may be preventing their tub or shower faucet from maintaining comfortable water temperature.
What is a shower balancing spool?
A shower balancing spool, also called a pressure balancing spool, fits into a faucet or valve cartridge to adjust water pressure for temperature control. If another toilet in your home is flushed while you are taking a shower, your home's plumbing water pressure will likely drop.
What is a pressure balancing spool on a faucet?
It is no fun receiving a sudden blast of scalding hot or freezing cold water while taking a shower. The pressure balancing spool is a mechanism in your shower's faucet or valve cartridge that adjusts water pressure accordingly to maintain a comfortable water temperature.
How to clean a stuck or seized balancing spool number 1423?
This article will explain the best method of cleaning a stuck or seized balancing spool number 1423. The water supply shut off valves must be turned off- see article How to Turn Off the Water Supply to the Faucet. Recommended Tools: Phillips Screwdriver, Flathead Screwdriver, Soft Brush, Small Bowl, White Vinegar
How do I clean the balancing spool on my power tool?
Using a 50/50 solution of white vinegar and water, swish the balancing spool around in the solution and allow it soak for 5-7 minutes. Use a tooth brush to clean the outside of the balancing spool.
What is Moen pressure balanced?
Moen pressure-balance shower valves are designed so they sense hot and cold water pressure and keep them in balance, preventing the shower from sudden surges of hot or cold water.
How do you remove a Moen balancing spool?
4:226:51How to Remove a Stuck Moen Cartridge Balancing Spool - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt into the balancing spool open up the pliers. By squeezing the handle. And you can see it pulls itMoreIt into the balancing spool open up the pliers. By squeezing the handle. And you can see it pulls it out.
Why does my Moen shower not have cold water?
Typical Cause Debris or an obstruction in the balancing spool is causing it not to move freely within its housing. In some models, a lack of pressure feeding the hot and cold will be the cause. The valve also may need to be calibrated.
How do you adjust Moen Posi Temp?
To adjust the Temperature Limit Stop, with the handle removed, loosen the adjustment hex screw with a 7/64" hex wrench and slide the screw downward. Tighten the hex screw. Test the hot water temperature (not to exceed 120°F).
Does Moen still make Moentrol?
Moen produces a variety of Single Handle Shower: Moentrol Valve.
Why am I getting hot water everywhere but the shower?
Well, if you're getting hot water everywhere else in the house but the shower, you most likely have one of these 2 issues: Your anti-scald device is set too high. Your shower mixer valve went bad.
How do I fix low cold water pressure in my shower?
If You Have Pressure Issues in Other PlacesMake sure your water main shutoff valve is fully open. ... Run your cold and hot water separately. ... Adjust your pressure reducing valve. ... Have your pipes inspected. ... You might have a small leak.
How can I make my shower colder?
2:143:27How to adjust your shower water temperature colder or hotterYouTubeStart of suggested clipEnd of suggested clipAnd turning it that way. We know that colder temperature. And this way is hotter.MoreAnd turning it that way. We know that colder temperature. And this way is hotter.
How does the Moen Posi Temp valve work?
Behind the handle of a Moen PosiTemp tub and shower faucet are built-in stops that limit how far the handle can turn. By controlling the turning range of the handle on a Moen PosiTemp valve, these temperature limit stops restrict the water temperature range, meaning it cannot get too hot or too cold.
How do I make my shower water hotter?
1:312:51How to Make Your Shower HOTTER! - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe can assume that the shower faucet has an issue. So we twist off the handle. Remove. The plate.MoreWe can assume that the shower faucet has an issue. So we twist off the handle. Remove. The plate. And reveal the splined rotation stopper ring when you turn on the shower.
How do you calibrate a Moen shower valve?
Pull the temperature stem (#2) from the valve without rotating. Rotate the temperature stem (#2) from the 2 o'clock position counterclockwise back to the 12 o'clock position. Replace the temperature stem (#2) in the new position and secure it with the screw (#1). Test the temperature of the water.
Why is my cold water not working but hot is?
If no cold water is a widespread issue throughout the home, it's possible a shutoff valve in the main water supply line may have been turned off accidentally. If that's the case, you can simply turn the valve back on and get back to showers as normal.
Why is my water not getting cold?
Lack of cold water is usually caused by a defective pressure-balancing valve in a cartridge. This part is located inside the shower faucet. So, are you feeling handy? With a few tools and some patience, you may be able to replace the valve cartridge on your own.
Why is my shower mixer not mixing?
The usual suspects for this problem are a blocked shower head, kinked or damaged shower hose, or blocked inlet filters in the shower itself. It could also be due to faulty non-return valves. Permanently running either hot or cold.
Why is my cold water luke warm?
There could be a wide range of culprits causing your cold water to run warm, but the most common include too much water pressure, closeness of pipes, recirculating plumbing, improper installation of heat traps, water expansion tank valves, and even something known as the heating effect.
Aromatherapy Showers
Whether you’re fresh off a workout or feeling stressed from work, the best way to wash it all away is with a luxurious shower. Elevate your shower routine by infusing the water with essential oils and spa-inspired fragrances. Relax. Rejuvenate. Reinvent your time in the shower with Moen.
Moen Garbage Disposals
Moen has the perfect garbage disposal for your kitchen based on how you use it. And, see how Consumer Reports rates the EX75C model - and other Moen models - in the latest competitive ratings.
MOEN PLUS
Welcome to a place just for Moen owners. We are dedicated to designing and delivering innovative, stylish products that last a lifetime and help you to enjoy the benefits of a beautiful water experience.
Aromatherapy Showers
Whether you’re fresh off a workout or feeling stressed from work, the best way to wash it all away is with a luxurious shower. Elevate your shower routine by infusing the water with essential oils and spa-inspired fragrances. Relax. Rejuvenate. Reinvent your time in the shower with Moen.
Moen Garbage Disposals
Moen has the perfect garbage disposal for your kitchen based on how you use it. And, see how Consumer Reports rates the EX75C model - and other Moen models - in the latest competitive ratings.
MOEN PLUS
Welcome to a place just for Moen owners. We are dedicated to designing and delivering innovative, stylish products that last a lifetime and help you to enjoy the benefits of a beautiful water experience.
Aromatherapy Showers
Whether you’re fresh off a workout or feeling stressed from work, the best way to wash it all away is with a luxurious shower. Elevate your shower routine by infusing the water with essential oils and spa-inspired fragrances. Relax. Rejuvenate. Reinvent your time in the shower with Moen.
How to reinstall a balancing spool?
Reinstalling the Balancing Spool: 1. Slide the balancing spool back (#4) into the valve body (#5), using the Flathead screwdriver, screw it back down into the valve body. 2. Reverse Steps 1& 2 above. For additional information on Moen products visit solutions.moen.com and select the type of product you are repairing.
What should a balancing spool rattle like?
Once this is done, shake the balancing spool. It should rattle like there is a metal ball inside (similar to the sound a spray paint can makes when you shake it). If there is no sound, the balancing spool will need replaced. 1.
How to remove a 1423 escutcheon?
To remove the stop tube (#3), grab ahold of the stop tube (#3) and pull forward until it has been removed. 2. To remove the escutcheon (# 2), use a Phillips screwdriver to remove the two escutcheon screws (#1) . Slide the escutcheon plate (#2) off of the valve body (#5).
What is a balancing spool?
The pressure balancing spool is a mechanism in the faucet or valve cartridge in your shower plumbing that adjusts water pressure accordingly to maintain ...
Where to install balancing spools in shower?
Shower balancing spools are installed either from the front side or back side of the plumbing shower wall. Installing balancing spools from the back side is the most cost-effective method, since repairs can be made without taking apart the wall. However, if access to the back side of the shower wall is blocked, you must repair the cartridge faucet from the front side. To enable easy access to the balancing spool, install access doors in the drywall or plasterboard in case of future maintenance.
How to clean a spool of water?
Gently tap the spool on a hard surface to loosen debris, and rinse out with water. You can use a soft toothbrush to clean inside the spool. If the internal slide still does not easily slide back and forth, replace the spool. Before removing your faucet, turn off the water supply to the faucet. To relieve the water pressure to the faucet, turn ...
How to keep pressure balancing valve working?
To keep your pressure balancing spool in working condition, clean the balancing spool regularly. Spool-type balancing valves are susceptible to clogging from debris, scale deposits and sediment build-up. Large particles can get stuck in the balancing spool, preventing water from running properly through the faucet.