Cost of Swamp Coolers
| Swamp Coolers Costs | Zip Code | Units | |
| Basic | Better | Best | |
| Swamp Coolers – Material Prices | $375.00 - $650.00 | $755.00 - $980.00 | $1000.00 - $1200.00 |
| Swamp Coolers – Installation Cost | $150.25 - $175.35 | $190.50 - $220.05 | $250.00 - $390.00 |
| Swamp Coolers – Total | $525.25 - $825.35 | $945.50 - $1200.05 | $1250.00 - $1590.00 |
How much does it cost to install a swamp cooler?
When it comes to cooling down homes and buildings, many people decide between swamp coolers and traditional air conditioners. On average, the price of installing a swamp cooler is around $2,500. On the other hand, the average cost of installing a classic air conditioning unit is around $5,377.
How much does it cost to repair a swamp cooler?
Swamp Cooler Repair Average Costs. Hiring a professional to service or repair a swamp cooler might cost as little as $50 and as much as $500 or more depending on what the issue is. In most cases, costs fall in the $150 to $300 range. Repairs that don't require replacement parts, including winterization, usually cost $100 to $150.
How much is a new swamp cooler?
Swamp coolers themselves range from $40 to $2,300, depending on the cubic square feet the unit covers. A larger space means you’ll need a more powerful swamp cooler. An HVAC professional charges between $50 and $70 an hour on average. Total labor costs depend on the difficulty of the install and how long it takes.
How much does a swamp cooler cost?
On average, ground-mounted swamp coolers cost between $1,500 to $5,500. Ground-mounted evaporative coolers are set up outside the home low to the ground, making them more accessible for maintenance and repairs. They are also simpler to install than roof-mounted units.
How much does it cost to run a swamp cooler all day?
This also depends on the size and scope of your model. Some coolers cost less than $0.50 for an entire 24-hour period, while others might cost over...
How much water does a swamp cooler use?
This varies based on the size of the unit. Some use less than a gallon per hour, while others use over 10 gallons an hour.
Can you leave a swamp cooler on all night?
Yes, this is possible, but the effectiveness varies depending on the outside temperature and humidity levels.
How often should swamp cooler pads be replaced?
This depends on the type of pads. See the instruction manual for your model for exact details. In general, you need to replace pads every 1-5 years.
How much does it cost to run a swamp cooler per month?
This depends on the cooler’s size and the amount you use it, but costs generally range from $10 to $25 per month.
Do whole-house evaporative coolers work in all climates?
No, these coolers are only effective in dry locations with low humidity levels. They do not work well or at all in very humid places.
Where are swamp coolers used?
Swamp coolers are more often used in states where the weather is drier such as Arizona, Utah and Nevada.
How does a swamp cooler work?
Swamp coolers use a process called evaporative cooling, meaning that it uses moisture to cool the air. It takes warm air, puts it through wet evaporative cooler pads to produce cool air . This air is then circulated through the home by a blower motor and vents. The swamp cooling unit is made up of several main parts: water supply valve, float, pump, evaporative pads and blower. The water supply valve brings water into the unit. When the unit is filled with water, the float comes to the top to cut off the water supply. The pump is responsible for sending the water through the water distribution lines that keep the evaporative pads wet. The evaporative pads clean and cool the air. The blower motor pushes the cooled air throughout the house. Each of these elements play an important role in the operation of a swamp unit. The unit may not function if any part doesn’t work.
How Much Does It Cost to Run an Evaporative Cooler?
While swamp coolers can be used anywhere, they are most often used in dry climates. They are also less expensive than their counterparts. The cost of installing and running a compressor and air handler is significantly more expensive than a swamp cooler.
What are the parts of a swamp cooling system?
The swamp cooling unit is made up of several main parts: water supply valve, float, pump, evaporative pads and blower. The water supply valve brings water into the unit. When the unit is filled with water, the float comes to the top to cut off the water supply. The pump is responsible for sending the water through the water distribution lines ...
What happens if a cooler is not wet?
If they aren’t wet, it will blow warm air. Provide regular maintenance: Regularly cleaning the unit of any contaminants will help to operate smoothly. At Premier Industries in the Phoenix, Arizona area, we work with homeowners and companies to provide evaporative coolers for their homes and businesses.
Why switch between swamp and central air?
This saves money because the central air system is there when needed but when the humid air passes, they can switch back to the swamp unit.
When to use a cooler?
Use it during periods of lower humidity: Coolers are not effective when the humidity is about 75%. It can actually make the air feel damp. For some people, this means only using the cooler for part of the year.
How much does it cost to install a swamp cooler?
Evaporative cooling installation cost for swamp coolers ranges from $150 to $2,000. A whole-home, ground-mounted swamp cooler can be installed for around $500 . Simple portable units can be DIY, without help from a professional. More complicated and larger models like roof and ground-mounted units may need to be installed professionally. This involves mounting and securing the units in place and connecting any necessary ducting or even installing new ducting. The process varies in length, from an hour for a window unit to three or four hours for ground and roof-mounted coolers.
How efficient is a swamp cooler?
Efficiency is one of the main selling points of a swamp cooler over something like an air conditioner. A swamp cooler uses about 25% of the electrical energy needed to power an air conditioner of the same size. Plus, they do not require chemicals to run only a steady supply of water, and most units are only effective in dry areas. This means their efficiency rating varies depending on where you use them. Using a swamp cooler in a humid place is not very efficient because the cooler struggles to have any impact, but it is much more efficient than an A/C unit in a dry zone.
How Does a Swamp Cooler Work?
When hot, dry air passed over those cloths, it cooled the area down. The same basic idea is used in swamp coolers, which usually feature a fan that draws hot air from outside. That air then passes over a set of damp pads inside the cooler, where the evaporation occurs as the water absorbs the heat. The cooler, moister air is then blown out of the unit’s front into the room or space you are attempting to cool down. Swamp coolers can be used indoors, if they have access to a window or opening to suck in hot, dry air from outdoors, and semi-outdoor locations like garages with the doors open.
How much does a Bonaire evaporative cooler cost?
Bonaire’s average prices for evaporative coolers range from $500 to $3,000. Bonaire is an Australian company, testing its products in some of the hottest and driest places on the planet before sending them to the U.S. From small portable models to window coolers and roof coolers, this company offers a wide range of options. Bonaire provides a seven-year parts, labor, and workmanship warranty on evaporative coolers for customers’ complete satisfaction.
What is the warranty on Aerocool?
Aerocool produces a wide selection of high-end, high-powered models and more affordable portable coolers. Aerocool offers a complimentary two-year warranty for repairs and exchanges caused by defects in material or workmanship. Aerocool’s warranty does not apply to evaporative coolers installed or operated outside of the continental United States.
Why do evaporative coolers need open doors?
Evaporative coolers need open doors and windows to function properly because they aim to replace the warm air in your home with cooler air, and the warm air needs a way to flow out of the house. In each room you want to cool, open a window or door slightly. Decreased efficiency.
How much does an indirect swamp cooler cost?
Indirect evaporative coolers are a little more expensive on average, costing between $1,500 and $6,000. In recent years, we have started to see more indirect swamp coolers on the market. These models are a little more advanced than direct units, featuring heat exchangers inside, which work to cool down the air without adding humidity. Indirect units can be used in a wider range of locations and are not limited to dry, low-humidity places.
Why is evaporative cooling less expensive?
Evaporative cooling can eliminate many of the costs associated with conventional central air conditioning simply because there are fewer moving parts to use up energy. Refrigerated air systems rely on refrigerant to transfer heat from one part of the air conditioner to the other.
What is the difference between an evaporative cooler and a refrigerant cooler?
This requires a compressor, pumps, and a blower motor. An evaporative cooler only requires water to pump out to the cooling pad. Then, a blower fan does the work.
Can you use an evaporative cooler as an air conditioner?
Anybody who owns an evaporative cooler knows there are some struggles involved with using this type of system as the primary air conditioner. For one thing, you don’t have precise temperature controls to ensure comfort, and you may not be getting the temperature you need.
Can you run a swamp cooler in a swamp?
Electrical Costs of Running a Swamp Cooler vs. Refrigerated Air. Swamp coolers aren’t found in swamps; it’s quite the opposite. A swamp cooler can really only function in a place where the air is dry, which is why most people in our area of the country are somewhat familiar with them.
Do central air conditioners use refrigeration?
Often, central air conditioners that use refrigeration for cooling are preferred due to the control and consistency you get—knowing you air conditioner will be reliable at keeping you as cool as you need it. But from a cost perspective, evaporative coolers certainly save the most overall.
Do window air conditioners work better than central air?
In this instance, many people install window air conditioners, just to use for some temporary relief. But window air units are far less efficient and effective than central air conditioners, and they don’t pair well with evaporative coolers (which require more ventilation).
Do swamp coolers cost more to run?
In most cases, it costs less to use a swamp cooler (evaporative cooler) than to use a central air conditioner. In general, swamp coolers do cost less to run that conventional central AC.
How much does a swamp cooler cost?
Swamp cooler prices can range from small, portable units around $40 each, to permanent, roof-mounted units at $1,600 or more. Unit cost will be determined mostly by size, location, and amount of duct work needed.
How much does it cost to install a swamp cooler?
An evaporative or swamp cooler will cost an average of $2,000 to install. This total includes an average of $700 in labor, or 10 hours at $70 per hour. This also includes the unit price and other materials such as tools, fittings, fasteners, and mounting hardware.
What is a swamp cooler?
Swamp coolers are an affordable, energy-efficient and humidifying method for cooling your home when compared with central air conditioners.
How much does it cost to replace a swamp cooler with a central AC?
Replacing a swamp cooler with central AC will cost about $5,500. The cost to install central AC may be worth it if the cost of the water used to run the evaporative unit is expensive in your area.
How many cubic feet per minute does a swamp cooler cool?
For a 1,000 square foot home with 8-foot ceilings, you would need a swamp cooler that cools 4,000 cubic feet per minute. Use this number to purchase your swamp cooler.
How much does it cost to install ductwork?
The cost to install ducting is between $400 and $900. This total includes vents, duct work and labor, but not the roof-mounted or ground unit itself. The amount of duct work can impact both the cost of materials and labor.
How much does a roof mounted unit cost?
Roof-mounted units will cost about $350 to $1,600 for materials alone. Labor can be pricey for this type because of access complications. Expect to pay more if there is not already a hole in the roof for the unit to sit in. You'll also need to pay more if you dont have a duct system installed in your home.