Some Common error codes caused by installation errors are as follows:
- E which indicates a kinked or bent drain hose.
- E which indicates that the water supply valve is closed or not fully open.
- LE which indicates a leak.
What does Samsung dishwasher error code Le mean?
The Samsung dishwasher error code LE indicates a leak has occurred. But it is difficult to identify the problem visually. The self-diagnosis system responds in time, so puddles do not form around the dishwasher.
What does LC mean on a Samsung dishwasher?
If the error code is ‘LC’ in a Samsung dishwasher it means that there is a leakage issue in your machine. This is either due to a faulty error system or if your machine is facing an actual leakage because of a drain pump and/or if there is some moisture stuck in the bottom pan.
What do the error codes LE LC E9 and LE1 mean?
The error codes LE, LC, E9, LE1 mean the same thing – a leak or water drain from the tank. If the pressure switch records the water level drop in the drum 4 times in a row within a few minutes – it will light up the error LE, E9, etc..
How to fix the Le error on the washing machine?
If the clog is a reason, LE error will appear on the display during washing. At the same time, water will flow out through the gaps. Unscrew the filter, wash and replace it. It is possible that after the last cleaning you did not fix it well. Screw the part tightly, avoiding distortions.
How do I clear the LE error on my Samsung dishwasher?
What is Samsung Dishwasher Error Code LE? [Solved]If the underlying problem is not addressed, restarting the washer may not be sufficient to resolve the error.You could try rebooting the machine: close the shut-off valve, unplug it for 5–10 minutes, and then turn it back on again.More items...
Why does my dishwasher say Le?
LE or CE display message is a motor error. It may indicate an issue with the motor or the wiring harness between the motor and control board. This can usually be corrected by performing the following steps: Press the POWER button to turn the dishwasher off.
What does Le error mean on Samsung washer?
The Samsung washer error code LE represents a sudden leak or water drain from the machine's tank. You will know this happened if the pressure switch records the water level drop in the drum 4 times within a few minutes. If this happens, the machine will show an error code of LE on its display and shut down.
How do I fix the code on my Samsung washing machine?
Here is what to check when you get the LE error code:Be sure the door is closed.Be sure the door seal is clean and free of debris.Be sure the water hose connections are tight.Be sure the O-rings on the water hoses are installed properly and not torn.More items...•
How do you fix a Le error?
An LG washer displaying an LE error code means that the washer's motor is locked. In some cases, the LE error code is caused by a heavy wash load. If a heavy wash load has caused the error code, it can be resolved by adjusting the washing load and performing a washer reset.
Why is my Samsung dishwasher blinking Le?
The LC or LE error code appears when the dishwasher's leak sensor detects moisture or the water reflector is blocked (Waterwall models only). When this code occurs, the dishwasher will turn itself on and will not turn off. During this time, it will attempt to drain the water away.
How do I fix the LE error on my LG washer?
How to reset the washing machine:Press POWER to turn the washer off.Unplug the washer from the power outlet or turn the circuit breaker to the unit off.With the power disabled, press and hold the START/PAUSE button for 5 seconds.Plug the washer back in, or turn the circuit breaker back on.More items...•
Why Samsung washer will not drain?
When your Samsung washer doesn't drain, it can be alarming to find your clothes sitting in water in the wash tub. What causes draining problems? It could be because the washer isn't level or the drain tube is clogged or pinched. Adjust the legs of your washer, as needed, and check the drain tube for kinks or damage.
How do I fix my Samsung Washer error 3E?
How To Fix 3E Samsung Washer Error Code:Unplug The Washing Machine: Unplug the washer for 2-3 minutes. ... Check Wire Connections On Drive Motor: One fairly common issue that causes the 3E error code is connection problems. ... Check Wire Connections On Control Board: ... Check Hall Sensor:
How do I fix the LE error on my LG washer?
An LE error code on the washer's display indicates that the motor is locked, possibly due to a heavy wash load. Large and heavy sized loads will put a strain on the motor, causing the LE code to occur. Performing a reset on the washer will normally resolve this error with a reduced load size.
How do I clear the IE code on my LG dishwasher?
LG Dishwasher - IE errorIE error.Water does not fill the appliance properly.Turn off the appliance.Check the following for the IE error:Check the water supply.Make sure water pressure is 20 - 80 psi.Check the water tap or valve.Make sure the water valve is fully opened.More items...•
What is Le error in LG washing machine?
The LE error code means that the motor in your washing machine is locked. It's usually due to a simple reason, like your washer is overloaded, but sometimes it can be a more serious issue that takes a lot more effort to fix.
How do I reset my LG dishwasher?
How to Reset LG DishwasherDisconnect power from the dishwasher for 10 to 15 seconds. You can do this by turning OFF the circuit breaker or disconnecting the power cord.Now switch ON the LG dishwasher. If you have Turn OFF the circuit breaker, then flip it to ON.Now press Power/Start button.Start an empty cycle.
Error description
The error codes LE, LC, E9, LE1 mean the same thing – a leak or water drain from the tank. If the pressure switch records the water level drop in the drum 4 times in a row within a few minutes – it will light up the error LE, E9, etc..
Error LE, E9 – in which cases you can fix it by yourself
Check the drain hose, you may have forgotten to put its end in a bathtub or toilet bowl if the drain is arranged in this way. The leaks in the place of connection of a hose with the sewerage might represent another cause.
What does LC code mean on Samsung washer?
If your Samsung washer has the LC Error code on its control panel, it means that there is a leak or your device is self-draining the water from the tank. This error is reflected by LC, LE or LE1 codes on the modern devices and E9 on the older ones. On the models without a display, this error will be indicated by the blinking of Bio, 60°C and cold washing light along with all the mode bulbs.
Where is the leak sensor on a washing machine?
In the models equipped with an Aquastop system, the leak sensor (float), which is located in the tray under the washing machine, also responds to the leak. If water gets into the tray, the float pops up, the appliance stops operating and displays the code for this error on the screen.
What Does LC Error Code Mean In A Samsung Machine?
An ‘LC’ error code indicates a leakage issue in your machine. It is important to make sure what the issue is exactly before you do anything to address it.
What Are Some Of The Other Less Common Reasons For The Leakage To Occur?
Some of the rarer reasons for a leakage can be if there is an issue with the door of the washer. If the door is not being sealed properly then some water may get splashed near the leakage sensor.
How Do I Fix My Samsung Dishwasher With LC Error Code?
If you were successful in figuring out what the problem was, then you have one less thing to worry about as you can specifically try to address that issue.
How Do I Reset The Code On My Samsung Dishwasher?
If you don’t think that there was any leakage in the first place you can try to disconnect the appliance from its power source and wait for about 15-20 minutes before plugging it back in. This can reset the error code appearing on the machine.
How Do I Fix The Leak Sensor On My Samsung Dishwasher?
If there was no visible reason for the LC code to appear on the washer, there might be a problem with the sensor itself. Luckily there is an easy way to replace it.
Is There A Reset Button On a Samsung Dishwasher?
There is no dedicated button provide by Samsung to reset the entire machine, but doing so is pretty easy by itself.