To summarize, the title block should generally contain the following information:
- Name of the consultant, company, or organization with address and phone number.
- Title of the drawing. ...
- Drawing number. ...
- Scale. ...
- The signature or initials of the drafter, checker, approving officer, and issuing officer, with the respective dates, should be shown.
- Drawing or sheet identification. ...
- Other information as required.
What information should be included in a title block?
The title block should show the name of the project and the drawing and sheet numbers as well as the drawing title (e.g., "site plan"). The drawing number is especially important, both for purposes of filing the blueprint and for locating the correct drawing when it is specified on another blueprint.
What does the drawing number mean in the title block?
On of the areas normally found within the title block are the drawing title, the drawing number, and lists the location, the site, or the vendor. The drawing title and the drawing number are used for identification and filing purposes. Usually the number is unique to the drawing and is comprised of a code that contains information about...
What are the areas normally found in the title block?
On of the areas normally found within the title block are the drawing title, the drawing number, and lists the location, the site, or the vendor.
What is blue print title block in engineering drawing?
engineering drawing blue print title block - The title block of a drawing, usually located on the bottom or lower right hand corner, contains all the information necessary to identify the drawing and to verify its validity. A title block is divided into several areas.
What is a title block?
A title block is divided into several areas. On of the areas normally found within the title block are the drawing title, the drawing number, and lists the location, the site, or the vendor. The drawing title and the drawing number are used for identification and filing purposes. Usually the number is unique to the drawing and is comprised ...
Why do drawings have a number?
Drawings are usually filed by their drawing number because the drawing title may be common to several prints or series of prints.
What is a reference block in engineering?
Most mechanical engineering drawing will have a reference block, which lists other drawings that are related to the system/component, or it can list all the other drawings that are cross-referenced on the drawing, depending on the site's or vendor's conventions. The reference block can be extremely helpful in tracing down additional information on ...
What should be included and written in an architectural title block?
We cannot just put that in any way deemed fit, there is a more schematic and orderly way in which these drawings are read.
What is title block?
Thus, a title block gives you an overview of the project you are working on and data available on the sheet, which makes reading, identifying, and verifying it easier.
Where can a title block be Positioned?
After understanding the hierarchy of placing different blocks of information in an architectural title block, let’s discuss where to locate the title block.
What is the correct title block size?
How much of the sheet should be allotted to the title block? Firstly, starting with the border which can also be considered a part of the title block should be a minimum of 10mm to 20mm.
What is the information in a drawing box?
This box contains various information such as the title of the drawing, scale, the logo or information about the company and people associated, the project which includes name, address, and date.
What are the benefits of title block?
Another benefit of the title block is that you will have all the standard information. You can just change the variable information in the title block suitable to your current project. This will standardize your and your team’s work and leave less room for human errors.
What is the remainder of the box?
The remainder of the box is left to record the progress and make construction notes. This title block plays with the hierarchy of different information boxes.
What should the title block show?
The title block should normally show the date the drawing was made and the initials of who made it. This information is important because using an outdated set of drawings can cause serious problems. Any revisions should be noted within the title block.
Where is the title block on a blueprint?
It is standard practice to include a title block on each page of a set of blueprints. It is typically located in the bottom right-hand corner of the drawing frame. Many firms, however, are using customized sheets that extend the title block from the lower right to the upper right-hand side of the sheet (Figure 2.13).
What is Figure 2.9A in AutoCAD?
Figure 2.9A AutoCAD drawing showing a typical foundation/wall section detail for a new residence.
Where is zoning located in a drawing?
For large projects, a drawing may sometimes be divided into a grid using letters and numbers. When zoning is used, it is typically located inside the drawing frame. Zoning allows easy reference to various parts of the drawing by referencing a coordinate such as B4.
What is figure 2.11A?
Figure 2.11A An AutoCAD drawing of a residential bay window showing an elevation.
What are break lines in blueprints?
Break lines are drawn to show that a part has been shortened to reduce its size on the drawing. The two variations of break lines common to blueprints are the long break line and the short break line (Figure 11). Long break lines are thin solid lines that have zigzags to indicate a break. Short break lines are thick, wavy solid lines that are drawn freehand. When either of these break lines is used to shorten an object, you can assume that the section removed from the part is identical to the portions shown on either side of the break.
What is dimension line?
Dimension and extension lines (Figure 6) are thin, solid lines that show the direction, length, and limits of the dimensions of a part. Dimension lines are drawn with an arrowhead at both ends.
What is a leader line?
These lines are normally drawn as thin, solid lines with an arrowhead at one end. They are bent or angled at the start, but should always end horizontal at the notation. When leader lines reference a surface, a dot is used instead of an arrowhead.
