The term has been extended to include similarly shaped pieces such as the panels of a hot-air balloon or parachute, or the triangular insert that allows extra movement in a garment (see Gore (fabrics)). Examples [ edit] Red Hot air balloon
What are gores used for?
In clothing and similar applications, a gore is a triangular or trapezoidal piece of a textile as might be used in shaping a garment to fit contours of the body.
What is a gore in sheet metal?
A gore is a sector of a curved surface or the curved surface that lies between two close lines of longitude on a globe and may be flattened to a plane surface with little distortion.
What is a gore pattern?
Gore is a triangular or tapered segment (narrow at the top and wider at the base) that is subtly inserted to extend the width from the waistline to the hem of a skirt. Imagine the triangular sections of an umbrella or a ship's sail; flared skirts can be made with two or more of these gores.
What is gore in geography?
gore. A map, shaped like the area between a pair of parentheses, of an area that lies between two lines of longitude. A gore can be fitted to the surface of a globe with little distortion.
How many gores does Vermont have?
The nine cities in Vermont are independent of MCDs and serve as county subdivisions. The three gores and one grant are nonfunctioning nongovernmental geographic subdivisions of the county.
What is the throat radius for elbow?
According to this rule an elbow for 12-inch pipe would have a throat radius of 18 in. and a center line radius of 24 in....PROBLEMS ON THE "CUTS OF AN ELBOW"Gage U. S. S. StandardGalvanized Steel Wt. per sq. ft. in lb.Black Steel Wt. per sq. ft. in lb.280.78120.6375260.90620.765241.1561.02221.4061.2755 more rows•Aug 9, 2015
What is the difference between a gore and a gusset?
Gore: A typically trapezoid shaped piece sewn to other similarly shaped pieces to create a garment, either a skirt or dress. For instance the many gored gowns from the Herjolfsnes find. Gusset: A triangle or diamond shaped piece inset between two or more seams to add room to the seam, especially in a sleeve.
How do you insert a gore?
7:3123:49Not THAT Kind of Gore: How to Sew an Inset Gore || A CosTutorialYouTubeStart of suggested clipEnd of suggested clipThis will be the sharp point of our inset gore I will take a couple of extra tiny stitches to secureMoreThis will be the sharp point of our inset gore I will take a couple of extra tiny stitches to secure these two pieces of fabric together before attempting to manipulate the gore down into the slit.
What is a four gore skirt?
The gored skirt is a type of A-line skirt with many different triangular panels sewn together. Unlike traditional A-line skirts, which are made from only a front and back panel, gored skirts have a softer fit around the hips and create a loose, flowing bell shape at the hem.
Why is it called a gore?
Wikipedia says the word is derived from gar, meaning spear. "The gore line is the solid white line that splits the on-off ramps from the freeway lanes," said Sheriff's Department spokesman Scott Stiff.
What is gore level?
Mild gore: a bit of blood, open but not deep wounds, insides not exposed, violent but not too violent. Moderate gore: more blood, deep open wounds, violent. Heavy Gore: lots of blood, deep open wounds, dismemberment, insides exposed, very violent.
Where did the word gore come from?
From Middle English gore, gor, gorre (“mud, muck”), from Old English gor (“dirt, dung, filth, muck”), from Proto-Germanic *gurą (“half-digested stomach contents; feces; manure”), from Proto-Indo-European *gʷʰer- (“hot; warm”).
What is a gore in Maine?
A gore, by definition, is an unincorporated area of land that is not part of any town and has limited to no self-government. Many are uninhabited.
What is gusset in sheet metal?
A sheet metal gusset is an indented feature that forms a gusset to stiffen a bend in sheet metal part.
What is flange length in sheet metal?
Flange length must be at least 4 times the material thickness. It is recommended to use the same radii across all bends, and flange length must be at least 4 times the material thickness.
What is bend relief in sheet metal?
What is a Bend Relief? A bend relief is nothing more than two small incisions cut into a piece of sheet metal to free the metal between the two. It separates the material you want to be able to fold from the rest of the part. You only need it when there is material on either side of a bend.
What is a godet pattern?
A godet is a separate piece of fabric inserted into the body of the skirt. The pattern resembles a mini A-line wedge with a circular top. The outline of the godet pattern is usually drawn onto the skirt fabric. Once this area of the skirt is cut out, the wedge-like shape is inserted. This inseam godet produces fullness around the hemline bottom. The more godet pieces you add to your skirt sweep, the fuller your flared hemline becomes. Since skirt patterns differ, you choose the area of the skirt for the desired inseam godet.
What is the difference between a godet and a gored skirt?
Gored and godet skirts are identifiable by their silhouettes. Gored skirts generally have a sectional, A-line shape, and godet skirts have fabric inserts that create a flared style around the hemline.
What are the measurements for a gored skirt?
Beginners and sewing enthusiasts can create the gored skirt pattern with three measurements: waist circumference, hip circumference and the desired skirt length. Since the skirt is made of a series of stitched sectional panels, these measurements are divided according to the amount of panels in your skirt design.
What fabrics go well with gored skirts?
Heavyweight fabrics -- wool, tweed or velvet -- fair well with gored skirt patterns. These thick textiles generally create unwanted bulk when you add skirt details, such as gathering at the waist. The series of stitched panels produces a smooth, form-fitting waist and hip line and the bottom area appears full.
Why does my bra have gore?
No matter what, a well-fitting bra will have a center gore that lies against your sternum. If it’s not, the problem comes down to one of two causes: the bra size is wrong, or the bra style doesn’t suit you. So, which is it? Read on to find out.
Why is gore floating away from my chest?
If the center gore is floating away from your chest, either the cups may be too small, or the band too big. If the cups are too small, you’ll know because they won’t contain your breast tissue, which might spill out of the top, sides, or bottom (take a peek near your underarms, a common place for spillage). And if you suspect that’s the case, ...
