A pencil torch is a brilliant way to repair confined or small spaces that would otherwise be hard to get to by hand. It’s also useful when traditional soldering tools, such as working with copper pipes, wires, and joints, are impractical. Pencil torches are easily refilled with propane
Propane
Propane is a three-carbon alkane with the molecular formula C₃H₈. It is a gas at standard temperature and pressure, but compressible to a transportable liquid. A by-product of natural gas processing and petroleum refining, it is commonly used as a fuel. Propane is one of a group of lique…
How do I light the pencil torch?
To light the Pencil Torch: Turn the Gas Control Dial to “ON”. Listen for the sound of flowing gas. Be careful to keep fingers away from the path of the flame. Move a lit match flame to the tip of the Pencil Torch to ignite the Torch. Once lit, the size of the flame can be adjusted by rotating the Gas Control Dial.
How do you fill a pencil torch with butane?
Fill the Pencil Torch with butane through the pressure fitting on the bottom of the Torch. Only use butane fuel with this product! Make certain that the Gas Control Dial is in the “OFF” position when filling the Torch.
What is an oxy/acetylene torch used for?
It had been primarily used for welding until jewelers adapted oxy/acetylene’s 6300°F flame to fuse, cut, solder, melt, and cast metal. Acetylene produces such an intense flame that it will burn a hole in most metal unless the oxy/acetylene torch is kept in constant motion. although it doesn’t burn as hot as oxy/acetylene, there are no tanks to buy.
Can a torch be used as a solder?
A basic torch using kerosene, a blowpipe, and lung power will solder, but today’s multi-metal jewelers expect their torches to match their own versatility. With so many torches on the market, a first-time buyer can be quickly overwhelmed by the sheer number of decisions that have to be made.
How long does a pencil torch last?
It operates on standard butane and will burn for up to 15 minutes on one filling. Use for soldering, brazing, or heating pipes and rusty bolts.
How do you solder with a pencil torch?
0:244:03How to Solder Wire Using a Mini Torch - YouTubeYouTubeStart of suggested clipEnd of suggested clipArea wear safety glasses when soldering strip the wires accordingly. Close to about an inch back toMoreArea wear safety glasses when soldering strip the wires accordingly. Close to about an inch back to expose the conductor. And you do not risk burning the insulator considering.
How do you fill a pencil torch lighter?
0:182:39Pencil Torch Instructions - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis one does not come with fuel in it. So you have to use a can of butane. And right there is theMoreThis one does not come with fuel in it. So you have to use a can of butane. And right there is the filling spout. You just hold it level like this put the bottle on and fill it until gas.
What kind of torch do you use to solder copper pipe?
MAPP gasThe torch needed for soldering copper can be propane or MAPP gas (methylacetylene-propadiene propane). MAPP gas comes in a yellow tank and propane comes in a blue tank. MAPP gas, usually a bit more expensive, gets much hotter than propane, so heats the pipe faster.
How do you use a small torch?
0:192:54How to Use the Jeweller's Micro-Flame Butane Torch - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd we're going to press down. And you're going to hear a little bit of a hissing sound. And that isMoreAnd we're going to press down. And you're going to hear a little bit of a hissing sound. And that is the butane going into the torch. And when it squirts out like that that means it's full.
Can pencil lead be used for soldering?
1:123:02KMS 25 ~ How To Burp Your Torch! - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's a little nozzle underneath and it's right where the filling is is down in there what youMoreThere's a little nozzle underneath and it's right where the filling is is down in there what you want to do is press on the little nozzle in there until you hear at sea.KMS 25 ~ How To Burp Your Torch! - YouTubehttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you burp a torch lighter?
How do you use a soldering pencil?
Make sure that there is no debris, dirt or lint clogging or blocking the lighter's operation. Even a small amount of debris can stop a lighter from functioning correctly. Exercise care when checking for blockages and keep your fingers well away from the igniter.My Lighter Hisses But Won't Light - CheapHumidorshttps://www.cheaphumidors.com › blogs › my-lighter-hiss...https://www.cheaphumidors.com › blogs › my-lighter-hiss...Search for: Why do torch lighters stop working?
How do you add butane to a pencil torch?
0:412:37How to light an Oxy-Acetylene Torch - Design at Loughborough UniversityYouTubeStart of suggested clipEnd of suggested clipLight. When the torch is lifted from the cradle the gas supply is turned on to light the torch pullMoreLight. When the torch is lifted from the cradle the gas supply is turned on to light the torch pull the nozzle backwards through the flame it's important that the nozzle is pulled backwards.How to light an Oxy-Acetylene Torch - Design at Loughborough Universityhttps://www.youtube.com › watchhttps://www.youtube.com › watchSearch for: How do you light a torch?
Can you solder to graphite?
Here you will find how to make an easy diy soldering iron by using graphite pencil lead and a pen. A 12v adapter is used as the power source.Easy DIY Soldering Iron Using Graphite Pencil Lead and Penhttps://www.pinterest.com › pinhttps://www.pinterest.com › pinSearch for: Can pencil lead be used for soldering?
What is a pencil torch?
A pencil torch is portable propane or butane flame. The thin cylindrical shape of the pen allows you to easily direct the flame towards your work while keeping any sideburns to a minimum.
How many pieces of lead do you need to replace on a pencil?
Replace both ends onto a pencil with only one piece of lead on each side (it does not matter which end has the most lead on).
How to make a pencil eraser red?
Light the lead with a match, allow it to burn for 1 minute or so until it has turned red. At this point, remove the flame and allow the pencil to cool down. Then, repeat for another end of the eraser (you may find some pieces have already broken off, in which case you should use those).
Can you touch the tip of a pencil torch?
Though you can touch the tip of the torch to get it going, it’s not very handy when your hands are wet or covered in grime. A switch makes things easier for the user and is an inexpensive way to modify a pencil torch.
Can you fill a pencil torch with propane?
It’s also useful when traditional soldering tools are impractical, such as working with copper pipes, wires, and joints. Pencil torches are easily refilled with propane or butane gas using the same methods for refill tanks.
Can you use a pencil torch to thaw food?
If you’re going to be using the pencil torch in the kitchen or for smaller jobs, it may be not easy to hold while trying to thaw food or melt ice. Attaching a clip makes it easier if you want to attach it somewhere else, like on your belt loop. If not clipped, the modified torch is still easy to hold as well.
Is a modified pencil torch comfortable?
The modified pencil torch would be more comfortable to use if it has a handle for the user to hold as it’s easier and less tiring than holding it at the end. If you don’t want to risk damaging the plastic or extending its life, consider adding some padding to the top of the handle.
What is a pencil torch?
The Pencil Torch is ideal for soldering, brazing and heating pipes. It allows you to control a flame
How to adjust the size of a flame in a pencil torch?
Move a lit match flame to the tip of the Pencil Torch to ignite the Torch. Once lit, the size of the flame can be adjusted by rotating the Gas Control Di al.
Can you ship a pencil torch without butane?
1. For safety, the Pencil Torch is shipped without butane fuel. You will need to purchase butane fuel.
Why do jewelers use torches?
Jewelers and bead makers fire up their torches to join, alter, and melt metal and glass. Heat is the catalyst and gas is the fuel that boosts the torch to perform this alchemy. A basic torch using kerosene, a blowpipe, and lung power will solder, but today’s multi-metal jewelers expect their torches to match their own versatility.
How many microtips does a little torch have?
It has 21 curved, straight, and twin flame microtips, (including one with a synthetic sapphire to control gas flow), and two melting tips. Its 6300°F solders the tiniest elements, yet produces enough heat to weld steel up to 1/8″ thick and melt three ounces of silver. (The complete oxy/propane outfit with five tips costs $635)
How many open ends do torches have?
To make decision-making tougher, all torches look pretty much alike. They have two open-ended tubes for the attachment of two color-coded rubber hoses, conducting air to one and fuel to the other.
How many tubes does a torch have?
They have two open-ended tubes for the attachment of two color-coded rubber hoses, conducting air to one and fuel to the other. They are either single-fuel or a combination of oxygen and fuel, which tend to be hotter. Some torches accommodate different fuels simply by changing the tip.
What temperature does a torch burn?
When acetylene, hydrogen, propane, MAPP®, and natural gas are combined with oxygen, they achieve temperatures ranging from 3500°F to 6300°F, hot enough for most jewelry applications.
When was Pyrex invented?
In 1924, when scientists at the Corning glass factories in New York invented a new glass called Pyrex, they had no idea they would revolutionize lampworking. Resilient to thermal and physical shock, this new borosilicate glass had a melting temperature so high that the forced-air lamps then in use could not melt it. Borrowing from the welding trade and combining oxygen and natural gas, new burners were designed that produced a flame hot enough to melt Pyrex.
Step 1: Unscrew Tip
Blow lightly both ways inside the torch tip but be careful when you are blowing the opposite direction of the way that the fuel comes out because there is A valve stem thing that can be blown out of place. if thats the case just poke it back into place and it will be fine. As I did so myself lol
Step 2: Screw On, Fill Up, Fire Up!
A torch fill should take no longer than 10-15 seconds. The fill action depends on differential pressure between torch & fuel can, & this is highly dependant on temperature. To get a maximum fill, put the torch in the fridge for 10 minutes before filling. Warm the fuel can with your hands, or by putting it in your pocket for a while.
