Standard Door Sizes
- Height. Most interior and exterior door panels are 80 inches tall (or 6′ 8″) – this is the standard height called for by many building codes.
- Width. Doors may be custom-made in any width from 1 foot wide to 3 feet wide. However, most interior doors found in hardware stores measure 32 inches.
- Depth. There is not as much variation in door thicknesses. ...
What is the height of a standard entry door?
While a door width of 36 inches is oversized for an interior door, it’s the standard size for front doors. The standard height remains the same, however, at 80 inches. Most entry doors are slightly thicker than interior doors as well, with a standard thickness is 1¾ inches.
What is the size of a standard entrance door?
Standard entry door measurements: Height: 80 inches (6 feet 8 inches) Thickness: 1 3/4 inches Width: 36 inches standard (30 and 32inches also available) Door measurements available by special order: 7 and 8-foot tall doors; Double entry doors Custom-made doors (made to your specifications; extra charge applies).
What is the minimum required size for an entry door?
That said, the hardware and direction (handles, latches and which way the door opens) can get a bit confusing. In general, the requirements are a minimum of 32” in width and a maximum of 48” and the door must open to 90 degrees. “Door openings shall provide a clear width of 32 inches (815 mm) minimum.
How wide should you make a door entry?
The rough opening for the door must include space for the completed jamb and clearance for the door. Common door heights are 80 inches tall with widths running 28, 30, 32, 34 and 36 inches. A basic rule of thumb is to make the rough opening 2 inches wider and 2 1/2 inches taller than the door.
How big is a door?
One of the most common front door sizes in American houses is 36 inches wide by 80 inches tall, and almost 2 inches thick. 1 However, not all doors will have these measurements.
Why measure your door?
Measuring your door will give you an idea of the rough opening, so that you can begin your shopping process. It also helps you determine how much room you have within your entry if you are considering changing the size, style, or configuration of your door. Before placing an order, consult with a professional to make sure your measurement is ...
How tall is a Pella door?
Doors can be as narrow as 30 inches and as tall as 96 inches, and thickness can depend on the door material. Entry doors are available in single- and double-door configurations with additional options like matching sidelights and transoms. These options can impact the overall size of your entry door. Pella entry doors are available in ...
What are the elements that add visual interest to a door?
Elements like sidelights, transoms or decorative inlays on front doors can add visual interest as well as additional light. Pick a front door that matches your budget, style and preferences. The front door is what gives your guests their first impression of your home and also has a large impact on curb appeal, so don't underestimate how important ...
Is Pella door a standard door?
Pella entry doors are available in a wide range of standard and custom sizes designed to fit your needs. Your entry door may not be considered a standard front door size, especially if the home is older or has custom finishes. The only way to know for sure is to measure the door.
How tall is a door?
Height. Most interior and exterior door panels are 80 inches tall (or 6′ 8″) – this is the standard height called for by many building codes. Other common heights are 84 inches (7′) and 96 inches (8′). While custom doors vary in height, these are the ones you’ll see most often.
Why is it important to understand standard door sizes?
It’s critical to understand standard door sizes in order to not waste time or money when replacing yours. Read on to learn these dimensions, things to consider, and why you should leave installation to a pro.
What is rough door opening?
The rough door opening is the rectangular gap in the wall’s framing where the door will be. It is larger than the door panel to give room for the door frame.
How tall are closet doors?
Different types of doors also have different measurements. For instance, most interior passages will have doors 80 inches tall. But closets may have doors 78 inches tall. The same goes for widths.
How wide is a garage door?
Some main entrance doors may be as wide as 42 inches. Other entrances may be narrower. Back doors and doors into garages may be 32 inches or 30 inches wide. It’s also worth noting the 36-inch width is the smallest recommended to give access for a person with a disability.
How to measure for replacement door panel?
If you are replacing only your panel, simply measure from top to bottom and side to side. If your door is an average size, you can drop by any hardware store to find a replacement. However, if you are replacing both the panels and frame, you’ll need to do a little more work.
What is the only tool you need to measure a door?
The only tool you need to measure a door is a tape measure. But before you measure, let us explain the different parts from which your door is made. Panel. This is the part of the door that swings open and shut. It’s also called the slab. Frame. This is the rectangle-shaped structure that holds the panel.
How wide is an entry door?
Entry doors are usually 36 inches wide. While a door width of 36 inches is oversized for an interior door, it’s the standard size for front doors. The standard height remains the same, however, at 80 inches. Most entry doors are slightly thicker than interior doors as well, with a standard thickness is 1¾ inches.
What is the standard interior door size?
Interior doors come in standard heights, widths, and thicknesses, as follows: Standard interior door height is 80 inches. This is the most common height for passage doors that lead from one room to another. An 80-inch door is called a 6/8 door (pronounced “six-eight”) ...
How thick is a door?
Some stores may stock doors with alternate thicknesses of 1½ inches and 1¾ inches. These are slightly thicker than standard and are often insulated or made from hardwood.
What is an 80 inch door called?
An 80-inch door is called a 6/8 door (pronounced “six-eight”) because it’s 6’ 8” tall. In stock, you will also find a slightly shorter 78-inch door. Called a 6/6 door, it’s reserved for closet and utility doors. Standard interior door width is 32 inches. This is the minimum width required for a passage door.
What is a prehung door?
Most of the time when you buy a door, you’ll want a pre-hung door, which means it comes with the frame (jamb) included. The other type of door, called a “slab door,” features only the door, no jamb.
Can you replace a door with a jamb?
If you’re only replacing the door, not the jamb, if you buy a smaller door, you’ll end up with gaps between the door and the jamb. Instead, buy a slab door that’s slightly larger and then shave it down to the exact size of the existing door.
Can you fit a door frame to an old door?
Choose a pre-hung door with slightly smaller measurements. This way, you or a professional carpenter (you’ll need basic carpentry skills to hang a door) can fit the new door frame within the rough opening for the old door. It’s common to have to add some shims for a tight fit.
How wide is a standard exterior door?
So the best standard exterior door sizes are in width from 36 inches to 42 inches and for double doors they are from 72 inches to 84 inches. The height of these entryways are typically 80 inches but can be as much as 84 inches to even 96 inches.
What is the standard door opening size?
As you can see, the standard exterior door size rough opening is a full 2 ¼ inches wider than 36 inches and 2 1/8 inches higher than 80 inches. Keep this in mind. If you are using brick mold openings the dimensions would be 40 inches by 82 7/8 inches.
How wide is a 36 inch door with two 14 inch sidelights?
Sidelights typically come in 12 inches or 14 inches in width. So a single 36-inch door with two 14 inch sidelights is a nominal 64-inch width. The height is the same as with a single door.
What is the width of a prehung door?
The proper exterior pre-hung door is based on even more factors. The standard jamb width is 4 5/8 inches. However, there are times when the jamb is wider and you will need to order a jamb extension for your standard pre-hung door.
What does it mean when a door swings left or right?
In addition, you will need to know the swing and handing. This means is the door going to be a left or right in-swing and this determines where the door handles should be placed. Then there is the insulation factor of the material used for the door. This means is it wood or vinyl or composite or even steel clad.
How Doors are Measured
To check the measurement of any door, measure inside the frame. An accurate assessment is needed to properly fit a door. For width, measure three times inside the frame at the top, middle, and bottom. This will determine the width and reveal any discrepancies due to shifting from age. Measure the height from both sides of the inside of the frame.
Standard Door Heights
For the most part, exterior doors come in standard sizes. Most available on the market conform to strict measurements, so the chances of getting something wildly off are slim. For the most there are only four sizes to choose from when it comes to height.
Standard Door Widths
The next measurement to understand is width. As with height, most doors are manufactured to standard. This makes choosing one for your home much easier. Width options are a little simpler, with only three standard sizes. Variations tend more towards utilitarian goals, such as accessibility for people with disabilities.
Unusual Measurements
Aside from basic doors, there are a few common but more expressive types of door sizes. Besides just single doors, Nick’s Building Supplies also offers a wide assortment of options to make any entryway impressive and beautiful.
How wide is an egress door?
An egress door must have a clear width of no less than 32 inches and a clear height of no less than 78 inches. The clear width dimension is measured between the face of the door to the door stop when the door is open to 90 degrees. To achieve a 32 inch opening, you will need at least a 36 inch door. There is no minimum dimension required ...
How many inches does a 36 inch door need to be?
You must install at least a 36 inch door to achieve a 32 inch opening. Once you take the thickness of the door, the thickness of the door stop, and the allowance for the hinges, you are left with the clear opening. This is why you need a 36 inch door to achieve a minimum 32 inch clear width opening.
How many egress doors are required for a duplex?
Section R311.2 states that at least one egress door must be provided for each dwelling unit. For example, a single family home requires at least one egress door and for a duplex, each unit must provide at least one egress door. This egress door leading to the exterior is typically used as the front door. You can have more than one egress door, such ...
What is the IRC for front door?
When it comes to the standard size of a front door for a residential dwelling, we must understand that the International Residential Code (IRC) outlines the requirements for the minimum door size of a home used for exiting.
Does a sliding patio door count as an egress door?
First off in order to be considered an Egress Door, the door must be side hinged. So for example if you look back at the floor plan above, the sliding patio door off the back does not count as a required egress door. This is because it is not side hinged and instead opens by sliding.
Can you have more than one egress door?
You can have more than one egress door, such as a back door to provide an extra level of safety, however the code only requires a minimum of one door for each dwelling. See the example below….
Is there a minimum dimension for interior doors?
Meaning that there is no minimum dimension for other doors within a residential dwelling unit. Even though there is not a minimum requirement for interior doors within this section or anywhere else in the residential code, common sense and best practices should be used when selecting an interior door of any size.
