How to install an electric strike or electric lock?
install, and service electric strikes is extremely important to the future success of his/her business. This guide is divided into the five following sections: 1. Specify the appropriate electric strike to meet your customer’s needs. 2. Identify the basic tools used in the installation of an electric strike. 3. Properly install an electric strike. 4.
What is an electric strike door lock?
To install the electric strike:
- Install the power supply/transformer, release mechanism, and if necessary, the rectifier.
- Cut out the opening for the electric strike. Check to be certain the electric strike will fit in the opening.
- Attach the mounting clips onto the top and bottom of the electric strike cut-out. ...
- Make the necessary electrical connections.
Is there an electric strike with latch bolt monitoring?
Monitoring capabilities have been added to electric strikes. Adams Rite offers two types of monitoring for their electric strikes; latch bolt monitoring and jaw monitoring. The latch bolt monitoring is accomplished by have a sensor switch in the base of the jaw.
How to lock strike Valtryek V3?
Strike Valtryek V3 is an Energy Layer released by Hasbro as part of the Burst System as well as the SwitchStrike System. It debuted in western countries with the release of the Battle Tower . Unlike Takara Tomy's Strike God Valkyrie, Hasbro's Strike Valtryek V3 is purely a cosmetic change with the Bound Attack gimmick still in place.
Are electric strike locks secure?
Maglocks are fail-safe, while electric strikes are generally fail-secure. In other words: Magnetic locks require power to lock the door, whereas electric locks require power to unlock the door.
What is a striker in a lock?
A strike plate is a piece of hardware that works with a lock to keep a door secure. Strike plates are installed on the door frame and contains a hole which receives the spring loaded latch or bolt which comes out of the latch or lock.
Do electric strikes work with deadbolts?
Using an electric strike with an electric strike is not a common application for either a cylindrical or a mortise deadbolt. We usually use a deadbolt to override an access control system so that if the deadbolt is extended, access will not be granted.
Do you need an electric strike with a card reader?
An electric strike and keypad are also useful because no key is necessary. To allow access, you simply share the code to the person entering your premises. Or electric strikes can be used with card readers (i.e. HID readers) and allow access via fob or card swipe.
Are strike plates necessary?
Strike Plate This is the plate the latch-tongue, or deadbolt-tongue will connect with. It should sit flush with the door jamb. Any passage or privacy set needs to have a strike plate for the door to latch. Additionally, deadbolts need a strike plate to properly lock.
Why do you need a strike plate on a door?
The main function of this simple plate is to secure the door and protect you, your loved ones and your possessions against intruders. It functions as an anchor point, a way to reinforce the door frame by engaging the deadbolt and keeping the door locked tight.
Can an electric strike be fail-safe?
Summary. Fail safe locks should be used on stairwell doors requiring re-entry and any other doors which must allow free access upon fire alarm or power failure. Fail safe electric strikes can't be used for stairwell re-entry because fire doors require fail secure electric strikes for positive latching.
Does an electric strike need a power supply?
Electric strikes require a power supply to function. Electric strikes have some type of keeper, or gate, for the latching mechanism on the lock. When a credential is presented and the strike is disengaged, the gate on the strike will allow the latch to be pulled through the gate.
Is a door strike normally open or normally closed?
Normally Closed - This is when there is a constant current of electricity in its normal state. Energizing or changing the state will open the contact and disrupt the current. Normally Open - This is when there is no current of electricity in its normal state.
Do you need an electric hinge with an electric strike?
Your hinges must be compatible with other devices such as electrified mortise locks, electrified cylindrical locks, delayed egress exit devices, electric trim, and electric strikes for door pairs. Additionally, you'll want to ensure hinge compatibility of power control inputs for electric locks.
Can you use an electric strike on a double door?
6100 Series Electric Strike They are ideal for drop-in replacement or new construction with five models providing coverage for many single or double door applications, including fire-rated doors.
Can you put an electric strike on a double door?
Cylindrical locksets, mortise locksets and deadbolts typically require an electric strike that's recessed into the frame, which most times requires cutting into the frame or the second door of a double-door set. There also are electric strikes designed for use with exit bars and even vertically mounted Pullman latches.
Why are electric strikes and electric locks the same?
Because electric strikes and electric locks operate in the same manner (opening a door from a remote location with special access equipment), they are often confused with each other. Many people even use both terms interchangeably. However, electric strikes are very different from electric locks.
What is an electric strike?
Electric strikes replace a standard door strike and is connected to a power supply. When an electric strike is activated, it releases the latch, unlocking the door. Electric strike locks remain locked from the outside at all times. When the door closes behind you, it automatically returns to a locked position.
What are the common mistakes when installing an electric strike?
Two Common Mistakes When Installing an Electric Strike. The most common (and expensive) mistake is to use electric strikes on interior stairwell doors. This presents a problem because in most jurisdictions, stairwell doors must be unlocked and positively latched when during a fire alarm or power outage.
Why do locksets stay locked?
Lockset can stay locked but the strike releases to allow the power operator to freely swing the door open. Offers a cleaner look than an electric strike. It can be argued that electrified locks are more secure, since electric strikes are more visible and accessible for tampering.
Why are electric locks so expensive?
Cost is a factor since electric locks are more expensive than electric strikes and installation charges are usually higher because installation is more involved, such as prepping the door for a raceway and accounting for the added power transfer device connecting the frame to the door.
What happens if a door is struck and is not latched?
If the strike is fail safe, the door will not be positively latched, meaning it will be stuck in a latched/locked position. Your AHJ (authority having jurisdiction), such as OSHA would be fully within their rights to have you replace all the electric strikes.
What is a fail safe strike?
Fail-secure Electric strike: A fail-safe electric strike will unlock in the event of a power loss, allowing everyone free access. Magnetic locks, in comparison, are all fail-safe. Therefore, in a power outage, a magnetic lock will remain unlocked and not function.
What is magnetic lock?
Magnetic locks and electric strikes are electrical hardware devices used to maintain the security of a door opening. Both of these devices can be activated by a range of tools, including passcodes, biometric readers, keycards or buzzers.
What is a maglock?
MAGNETIC LOCKS. An electromagnetic lock (magnetic lock, maglock) is a locking device that consists of an electromagnet and an armature plate. By attaching the electromagnet to door frame and the armature plate to the door, a current passing through the electromagnet attracts the armature plate holding the door shut.
What door do maglocks work on?
They usually are installed along with a keypad, as well as a key card or key fob access control reader. Most maglocks are installed on glass doors, though they work well with wooden or metal doors too.
Do magnetic locks work?
Magnetic door locks require a constantly available source of power. If power is lost, the magnet will not work. A magnetic lock is always fail-safe, and unlocks automatically if power is cut. Magnetic locks are almost always installed with an access control system, which requires some form of authentication for users to enter.
What is an electric strike?
The electric strike provides remote electrical control to unlock a door. The electric strike was originally patented in the late 1880s so New York City high rises could have a locked common entry door, while residents could grant access and physically unlock the door from inside their apartments. Today, there are a number of different styles ...
What determines the operation of an electric strike?
The voltage and duty of the solenoid determine the operation of the electric strike. A solenoid is the housing that surrounds a coil of wire around a metal rod. When the solenoid is powered, the rod moves in one direction. When power is removed, the rod moves back to the original position.
What is the strike lip made of?
The faceplate will be made of stainless steel and the strike lip will be made of either stainless steel or high temperature steel. The faceplate will be held on with tamper-resistant screws. Monitoring capabilities have been added to electric strikes.
What happens if power fails on electric strike?
If power should fail, the electric strike unlocks and remains in the unlocked condition. For this reason, if a fail-safe electric strike is used for the locking mechanism in a building, there must be a back-up battery system installed in case of power failure.
What is a continuous duty electric strike?
A continuous duty electric strike can be operated as either fail-secure or fail-safe. A fail-secure electric strike unlocks when powered. If power should fail, the electric strike remains in the locked condition. A fail-safe electric strike locks when powered.
What is the label on an Adams Rite electric strike?
The Adams Rite electric strikes have two adhesive labels attached to each electric strike. The larger label indicates the model, voltage, amperage, date of manufacture, the duty rating, and UL listing (if applicable). The smaller label indicates the model of the electric strike, the static strength, the dynamic strength, and the endurance.
How thick is a recessed electric strike?
Most recessed electric strikes are designed for a 1-3/4" thick door in a standard jamb. When installed, the edge of the electric strike lip is flush with the edge of the jamb. This enables the lock's latch to use the lip as a ramp to slide into the electric strike without contacting or damaging the jamb material.
What is an electric strike lock?
Electric strike locks are electromechanical door locking mechanisms. These locks enable you to release the locked latch or bolt on a given door from the outside (using a key card, key pad, or other electronic access key). Electricc strike locks also open from the inside by pressing a panic bar or other manual release device.
Is it easier to install commercial locks?
While a high-tech system might be tempting, it’s a lot easier to install the right kind of locks for your business instead. Equipping your property with high quality doors and commercial locking systems can provide both added security and control over the access points in your commercial building .
Can you install electric strike locks on your own?
Electric strike locks aren’t the type of locks that you can or should install on your own. When installing an electric strike lock, choose a licensed professional with experience in installing electric strike systems.
Why use electric strikes?
Electric strikes offer lower price and easier installation, and unlike most electric locks they can be used with automatic door openers for accessibility to comply with the American Disabilities Act.
What is the advantage of electric locks?
Electric Locks – The Security Advantage. Electric locks also have a slight security edge over electric strikes, particularly with cylindrical locks on doors that swing out of the secured space. With an electric strike the latch is much more exposed than with an electric lock, making it a tempting target for tampering.
Why do you need an electric lock for stairwells?
For stairwell openings that must be unlocked in the event of a fire yet positively latched, the answer is simple: one must use an electric lock (or exit device trim) because there is no fail safe, fire-rated electric strike.
Can electric locks be field installed in fire rated doors?
Technically, neither electric locks nor electric strikes can be field installed in fire-rated openings because fire-rated doors and frames are only supposed to be modified in a fire-rated shop.
Is mortise lock more robust than rim lock?
This is also true of mortise locks, but since mortise locks have a much more robust deadlocking feature it is not as much of an issue. On doors with rim exit devices, the latch is protected by the stop on the door frame, so the electric strike is much less vulnerable than with cylindrical or mortise lock applications.
What is electric strike lock?
Electric strikes and magnetic locks are easy-to-use, install, and cost-effective solutions to keep your premises safe. With so many products and brands available in the market, it can be a challenging task to decide the right security solution for your home or building. The best thing you can do is contact Stebilex Systems today. And our highly qualified product experts and awesome sales team will be more than happy to help you decide the right security solution.
How does a magnetic lock work?
The working of magnetic locks is based on the core principles of electromagnetism where a presence of electric current between the armature decides and the metal plate decides the operation of the door. On the other side, the working of the electric strike is an electromechanical process where the latch is released electronically for unlocking the door.
What is an electric strike lock?
Electric strikes are similar to regular strike locks in that they are comprised of a strike that blocks the door latch. It’s installed at the level of a door handle, and is by far the most common electric lock you’ll find on metal or wooden doors. The main difference between it and a traditional strike door is that, as the name suggests, ...
What is strike lock?
Electric strike locks are a basic and reliable piece of hardware for anybody looking to get their feet wet with modern electronic access control. With a configurable fail-safe or fail-secure mechanism, they’re suitable for many different scenarios, and can easily be wired to any modern readers or controllers for a fully future-proof access solution.
Why use an electric strike lock instead of an analog strike lock?
The only reason you’d have an electric strike lock instead of an analog strike lock is if you have smart access control, so you’ll want to make sure everything is functioning properly in that area as well.
Does an electric strike lock or unlock?
The electric strike will either lock or unlock when prompted with an electrical impulse, and the access reader will govern these electrical impulses. In this diagram, you can see the basic wiring for Kisi’s access control system with an electric lock. The one in the diagram is a magnetic lock, but the premise is the same for an electric strike.
Can you install strike locks on a wall?
As mentioned, electric strike locks are relatively easy to install, as they generally just take the place of an existing strike lock. If not, though, you will need to cut out the mold in the wall, and drill it in. In terms of actual installation instructions, Kisi has a helpful video here of a standard electric strike install.
Do electric strike locks have wireless capabilities?
On top of wiring your electric strike lock to a power supply, you will need to wire it to the access control controller or reader — most basic electric strikes don’t have wireless capabilities (by design!) The electric strike will either lock or unlock when prompted with an electrical impulse, and the access reader will govern these electrical impulses.
What is an electric strike?
Electric Strikes. Electric strikes are generally used with metal or wood doors. They can also be used in conjunction with a deadbolt, which is good because if you are not currently using something electronic, odds are you are using a deadbolt and will need something that is compatible.
What is fail secure with an electric strike?
If the power goes out, the fail-secure with an electric strike is that the doors remain locked, but can be opened manually either by turning the door latch or using a physical key. 2. Electric Push Bars or Exit Bars. These are generally used in order to comply with fire code.
What is fail safe lock?
Fail-safe locks are mostly used for main entry points like office doors or lobby access doors. A popular use for this application is maglocks which, by design, require power to operate. With fail-secure locks, if the power is interrupted or fails, the door stays locked.
Why do you need to use fail secure locks?
The reason is that in the case of a fire, those doors should remain closed to seal off a portion of the space and help reduce the fire from spreading.
What is magnetic lock?
Magnetic locks are a workaround for those designs and the amount of force necessary to operate the door’s opening and closing usually varies based on how large the door is in each scenario. As a result, magnetic locks can be a very classy option.
Why are push bars used in fire doors?
The doors are locked by default, but the push bars make a fast exit from a building possible in the event of a fire.
What is a push bar?
A push bar allows a building to have a modern access control system operating its doors while also complying with safety and fire code regulations, making it a suitable option in many cases. 3. Magnetic Locks.
