What is blue foam?
What is pink and blue insulation?
Who makes pink foam board?
About this website
What is blue foam board used for?
DuPont Styrofoam™ Insulation (Blue Board) is a nonstructural, rigid board insulation manufactured of Extruded Polystyrene Foam (XPS). Blue Board can be used both on exterior and interior walls to give you a continuous insulation barrier that can increase effective R-value of the wall by up to 20%.
What is the difference between blue and pink foam?
Main Difference Between Pink And Blue Foam Boards The two products also have the same insulating power. However, blue foam boards are manufactured by Dow Chemical Co. whereas the pink foam boards are manufactured by Owens Corning company. The boards are marketed under different brand names.
Is blue foam waterproof?
Styrofoam, as well as all kinds of rigid expanded and extruded polystyrene foam, resist water for a short period of time. However, they're not entirely waterproof, so you have to waterproof them with sealants before exposing them to continuous moisture.
How do you dissolve blue foam?
Acetone is a solvent that dissolves uncured polyurethane foam and can be used to clean up foam before it cures. Acetone-based nail polish remover will also work to remove uncured foam.
What is blue foam made of?
Pink and blue foam are similar, both made from expanded polystyrene—in fact this is how they are most often referred. Best known as Styrofoam (created by Dow Chemical), they are by far the most widely used.
Which insulation board is best?
Polyurethane (PUR) is one of the most efficient insulation materials on the market. PUR is available in the shape of insulation boards or foam. However, the boards have a better insulation value than the foam variant. Moreover, these boards guarantee a certain thickness in advance and nothing has to be taped over.
What happens if foam insulation gets wet?
Does spray foam absorb water? Yes, there are open cell spray foams on the market that will absorb water, but that doesn't mean they all do. The spray foam used here at RetroFoam of Michigan does get wet and water even moves through it, but it doesn't trap moisture indefinitely. This means it will dry out.
What is the best insulation to prevent mold?
Fiberglass insulationFiberglass insulation without backing may be the best choice. Cellulose insulation is constructed of ground paper, which is an ideal food source for the growth of mold if it becomes wet.
What's the best insulation for basement walls?
Closed-cell spray foam is the best way to insulate concrete basement walls. This is because it can achieve a higher R-value, along with excellent moisture resistance, with less thickness required. It can fill in all the gaps and spaces thoroughly, giving you the best protection against moisture and air infiltration.
Where should you not use expanding foam?
When NOT to Use Spray Foam InsulationFor areas that are too close to electrical boxes:For areas too close to ceiling light boxes:Open-cell spray foam on your roof:For closed-cavity spaces:If you have a history of skin, respiratory, or asthma problems:
What happens when you mix styrofoam and gasoline?
What Does Mixing Styrofoam And Gas Make? Styrofoam and gas mixture forms napalm. This is a strategy used in producing homemade napalms. Usually, when the styrofoam is released into gasoline, the material breaks down and forms a sticky and gelatinous substance.
What happens if you mix acetone and styrofoam?
Styrofoam is made of polystyrene, which in itself means a chain of styrene. Styrene is a relatively simple organic molecule that can easily bind with itself. When it comes in contact with acetone, the polystyrene chains fall apart.
What is pink foam insulation used for?
EPS is used under roofing, over foundation walls and beneath siding. Extruded Polystyrene. This foam board insulation is the rigid pink or blue panels that can be found at home centers in many different thicknesses. It is denser than EPS and provides more R-Value with a rating of 5 per inch of thickness.
Is pink foam safe?
Pink anti static foams have a shelf life. Once that shelf life is gone the foam can become extremely dangerous to the manufacturing environment and sensitive components. When walking through an EPA (ESD Protected Area) the most common violation of standard ESD practices is the use, or misuse of these foams.
Is pink insulation foam waterproof?
Foam board insulation products are generally considered water and mold resistant but expanded polystyrene foam boards (EPS) have air bubbles that can collect moisture and become wet. Moisture makes it hard to prevent mold from growing, making the foam board also prone to mildew growth.
What is the R-value of 2 inch blue styrofoam?
STYROFOAM extruded polystyrene insulation is rated at an R-value of 5.0 per inch at 75°F.
The Difference Between Blue And Pink Foam Board Products
Learn more about the difference between blue and pink polystyrene board. Contact us at 1-866-518-7804 for your insulation supplies needs in Toronto.
What Is Blue Board And How Is It Used In Construction?
Blue Boards Dry Faster Than Other Drywall. Blue board dries faster due to the paper that is around the plaster. You need to be aware of this fact since you will need to move faster when building with this kind of drywall.
What is blue foam?
Blue foam products intended to be used as sheathing on exterior walls are faced with thin plastic films that protect the board's extruded polystyrene core and add extra strength to the board. Boards intended for interior walls are unfaced, but some of them include convenience features such as notches at the edges to accommodate wood nailing strips. Other blue foam products are designed for roofing or cavity wall applications. High-density blue foam products are designed to resist compression under heavy loads when they're used beneath concrete slabs.
What is pink and blue insulation?
Pink and blue rigid foam insulation boards are made from polystyrene resin that is melted and then forced through a die to form it into the desired shape. As insulators, pink and blue boards perform virtually identically, with an insulating value of R-5 per inch of thickness. The two colors of board are sold under different brand names, however, and the two brands are differentiated mainly by the specialized variants within their product lines.
Who makes pink foam board?
Pink foam board is manufactured by Owens Corning, and it's marketed under several different brand-specific product names, including Foamular, ...
What is foamcore paper?
Foamcore, aka foamboard, is lightweight, easily cut, and surprisingly strong . In it's most basic form you'll find three layers: An inner layer of polystyrene foam, bookended by two sheets of clavcoated paper or simply kraft paper. The surface paper is slightly acidic but you can find acid-free versions for archival photography.
When was foamcore invented?
The original foamcore was created and marketed in 1957 by the Monsanto Company. (Yes, that Monsanto, the leader in the genetically modified seed industry.) Their original brand name for the material was: Fome-Cor. Foamcore, aka foamboard, is lightweight, easily cut, and surprisingly strong.
What glue is best for foam board?
Best foam board glue is Loctite's Power Grab. (FYI) It makes a great transition to many other materials also.
What type of glue do you use for modeling?
Some might try using hot glue but do so with caution, as the heat can warp the board. Foam, without the -core, is another very common design material. There are three basic types that can be used for modeling: Pink, blue and yellow (or Balsa foam.)
Can you paint styrofoam with acrylic?
(Just make sure if you are doing a lot of cutting or sanding, to wear a fume-mask, because the fumes are toxic.) You can paint Styrofoam with acrylic or water-based paint, but avoid any solvent-based paint, as it will damage the foam.
Can you use glue to glue foamcore?
Junior and Senior ID majors already know this, but for you sophomores or first-year grads: One must be careful if using glue or paint with foamcore. Because glues, especially superglues, and paint cannot adhere to foam, it will actually melt and dissolve it. What you need to use are spray adhesives like 3M's Super77 or Loctite. Some might try using hot glue but do so with caution, as the heat can warp the board.
What is blue foam?
When To Use Blue Foam Products. Blue foam boards come with thin plastic films which protect the polystyrene core and also enhance the strength of the board. It’s no wonder they are commonly used for insulation on the exterior walls. There are blue foam boards that are designed for interior walls.
What is the difference between pink and blue foam insulation?
If you are looking for an insulation panel that offers adequate protection and energy savings, you can choose the pink or blue foam boards. Both are manufactured using the same process and contain similar chemical components. The two products also have the same insulating power. However, blue foam boards are manufactured by Dow Chemical Co. whereas the pink foam boards are manufactured by Owens Corning company. The boards are marketed under different brand names. You’ve probably heard of the Styrofoam SM insulation products, this is simply a brand name for the blue foam boards. The pink foam boards are available in the market using different brand names including Propink, Insulpink and Thermapink which are all products from Owens Corning.
What is the R value of pink foam board?
They are both manufactured using polystyrene resin and perform virtually in a similar manner. They have an insulating R value of 5 per inch of thickness.
Can pink foam board be used on concrete?
There are those designed for interior walls whereas others work best on exterior walls. Pink foam boards can also be used beneath concrete slabs, roofs or foundation walls. When used for foundation wall insulation, the pink boards usually have drainage channels on the surface and a simple filtration system that prevents soil from clogging ...
Who makes pink foam boards?
However, blue foam boards are manufactured by Dow Chemical Co. whereas the pink foam boards are manufactured by Owens Corning company. The boards are marketed under different brand names. You’ve probably heard of the Styrofoam SM insulation products, this is simply a brand name for ...
Is expanded polystyrene insulation cheaper than pink and blue foam insulation?
There are also expanded polystyrene insulation products which are far less costly than the pink and blue foam boards. The major drawback to these expanded foam boards is that they are very fragile and have a lower insulating power. If you are looking for an effective insulator, opt for the pink and blue extruded foam boards.
What is blue board insulation?
Dupont Styrofoam™ Insulation (Blue Board) is a nonstructural, rigid board insulation manufactured of Extruded Polystyrene Foam (XPS). Blue Board can be used both on exterior and interior walls to give you a continuous insulation barrier that can increase effective R-value of the wall by up to 20%. First manufactured by Dow in 1941, Dow/Dupont's blue colored extruded polystyrene has been an industry leader ever since. Extruded Polystyrene Foam offers high, long-term R-value and excellent compressive strength. Blue Board's closed cell structure and lack of voids resists moisture penetration thus increasing its thermal efficiency and protecting underlying materials from water damage. When used with Weathermate construction tape to cover seams and Great Stuff sealants to seal gaps, Dupont Styrofoam™ insulation board provides a barrier against air leakage and infiltration.
What is weathermate tape used for?
WEATHERMATE Construction Tape WEATHERMATE™ Construction Tape from Dow is recommended to seal the joints and seams of WEATHERMATE™ housewraps and STYROFOAM™ insulated sheathings . In these applications,WEATHERMATE Construction Tape...
What is DermaBlue made of?
DermaBlue™+ Foam Wound Dressing is made of polyurethane/polyether foam, methylene blue (up to 0.25mg/g), gentian violet (up to 0.25mg/g) and silver sodium zirconium phosphate (up to 7mg/g). The three ingredients provide broad-spectrum antimicrobial protection within the dressing.
What is the concentration of methylene blue?
Methylene blue ( up to 0.25mg/g), gentian violet (up to 0.25mg/g) and silver sodium zirconium phosphate (up to 7mg/g)
What is Hydrofera Blue?
Hydrofera Blue: A powerful antibacterial wound dressing that utilizes a proprietary polyvinyl alcohol (PVA) and polyurethane foam technology in combination with two naturally occurring, organic pigments.
How much weight can Hydrofera Blue hold?
The sponge-like features of Hydrofera Blue’s PVA foam boast impressive absorptive capabilities, showing it can hold 12 times its weight in wound exudate.
Is Hydrofera Blue safe?
This same action helps draw the body’s natural healing agents to the wound, resulting in a balanced healing environment. Safe, effective, and versatile, Hydrofera Blue restores balance and efficiently heals a broad range of patients.
Can hydrofera blue be absorbed?
Hydrofera Blue cannot be absorbed by the tissues in the wound bed, supporting uninhibited re-epithelialization, while reducing the burden of biofilm.
What Is Blue Board?
As mentioned above, the blue board is a type of plaster that is more durable than drywall alone ( source ). You can find many uses for it, so long as you use it correctly.
How Are Blue Boards Used?
You have an assortment of options on how to use blue board in various settings.
Why does blue board dry faster?
Blue board dries faster due to the paper that is around the plaster. You need to be aware of this fact since you will need to move faster when building with this kind of drywall. If the gypsum dries too quickly, you won’t have much luck adhering other drywall or paint to the surface.
Why do you coat blue board with plaster?
You also want to coat your blue board panels with a plaster skim to make it less water absorbent.
What are the benefits of using blue boards?
These tips can help promote your success with your construction project. It can also save you time and wasted materials since you would need to replace any boards that you used incorrectly.
Why do we need blue boards?
Blue Board Can Help Reduce Noise. Due to its thickness, blue boards can provide noise-canceling effects. This feature can be useful for music rooms or recording studios. It is also great for bedrooms when you don’t want noise traveling all over the house. Blue boards aren’t only for the walls, either.
Why is blue board important?
Blue board can be significant assets to a project, so long as they are used correctly. Learning about the uses of a blue board can help promote the durability of any project. As well as the seamless finish when all is said and done. A successful project can promote your enjoyment of the finished product or your client’s happiness.
What is blue foam?
Blue foam products intended to be used as sheathing on exterior walls are faced with thin plastic films that protect the board's extruded polystyrene core and add extra strength to the board. Boards intended for interior walls are unfaced, but some of them include convenience features such as notches at the edges to accommodate wood nailing strips. Other blue foam products are designed for roofing or cavity wall applications. High-density blue foam products are designed to resist compression under heavy loads when they're used beneath concrete slabs.
What is pink and blue insulation?
Pink and blue rigid foam insulation boards are made from polystyrene resin that is melted and then forced through a die to form it into the desired shape. As insulators, pink and blue boards perform virtually identically, with an insulating value of R-5 per inch of thickness. The two colors of board are sold under different brand names, however, and the two brands are differentiated mainly by the specialized variants within their product lines.
Who makes pink foam board?
Pink foam board is manufactured by Owens Corning, and it's marketed under several different brand-specific product names, including Foamular, ...
