CUSTOM ORB®
- A lightweight yet strong roofing and walling material
- Versatile - Can be laid flat or sprung curved
- Nominal cover width: 762mm
- Minimum roof slope: 5°
What is a classic orb®?
CUSTOM ORB® is a timeless classic Can be sprung curved to minimum 9 metre radius Can be roll curved to minimum 400 mm radius Minimum pitch 8°
What is the price of Lysaght custom orb?
Custom Orb 0.42 COLORBOND $ 21.40 LYSAGHT CUSTOM ORB® is the famous BlueScope Lysaght corrugated profile, equally at home with traditional and contemporary design. It is long, wide, strong, lightweight and economical profile which can be quickly and easily aligned.
What is an orb® roof?
CUSTOM ORB® 1 A lightweight yet strong roofing and walling material 2 Versatile - Can be laid flat or sprung curved 3 Nominal cover width: 762mm 4 Minimum roof slope: 5°
What is the minimum coating mass for custom orb?
Minimum coating mass is AM150 (150 g/m²). Minimum yield strength for CUSTOM ORB is G550 (550 MPa). Minimum coating mass is AM150 (150 g/m²). COLORBOND® Stainless steel is pre-painted steel and is used for severe and coastal environments.
How do you install custom orb wall cladding?
0:363:24Using LYSAGHT CUSTOM ORB® as a wall cladding - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd doors are installed into the rough openings in the wall panel by using a tech extended pointMoreAnd doors are installed into the rough openings in the wall panel by using a tech extended point screw through the timber reveal into the jamb stud locate the window or door centrally in the opening.
What is the width of a custom orb sheet?
With the same 762mm cover width as traditional corrugated steel roofing CUSTOM ORB ACCENT® 21 can be easily utilised on existing and new roofs without the need for changes to supporting structures.
What is Colorbond Ultra steel?
Colorbond Ultra is a type of higher grade Colorbond steel sheets that are more suitable for extreme environments. They are designed to withstand harsh environments created by salt water and marine exposure.
How many colorbond sheets do I need?
Divide the length of your roof area by 0.760 to determine the number of sheets you need. For example, a structure that's 6.0m long is 6000 / 760 = 7.89 sheets. The next step is to round up to the nearest whole number for this example would be 8.
What is custom orb made of?
CUSTOM ORB is made from: ZINCALUME® steel complying with AS 1397—2001 G550, AZ150 (550 MPa minimum yield stress, 150 g/m2 minimum coating mass); or • Stainless steel standard grade designation is AISI/ASTM Type 430; UNS No. S43000 The base metal thickness is 0.42 or 0.48 mm.
What is Orb roofing?
Description. The original Australian corrugated roof sheeting and wall cladding ideal for modern and traditional architecture in residential and commercial applications. A lightweight yet strong roofing and walling material. Versatile - Can be laid flat or sprung curved.
What is the difference between COLORBOND and COLORBOND Ultra?
Colorbond Ultra has all the benefits of standard Colorbond but provides extra coverage in extreme environments. Colorbond Ultra is specifically designed for homes located within 100-200 metres of breaking surf or industrial emissions.
What is the most popular COLORBOND roof colour?
What are the Most Popular Colorbond® Roof Colours?Basalt.Cove.Dune.Evening Haze.Gully.Ironstone.Jasper.Mangrove.More items...•
How much more is COLORBOND Ultra?
Cost of Colorbond Roof Per Square Metre The cost of a powder-coated Colorbond is around $22 per square metre and a double-sided Colorbond is around $24 per square metre. Colorbond ultra costs around $37 per square metre.
How tight should metal roof screws be?
0:392:01Fastener Over-Tightening On A Metal Roof. EASY VIDEO ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou want to tighten the washer. So that it spreads to the edge of the metal cap. And not past theMoreYou want to tighten the washer. So that it spreads to the edge of the metal cap. And not past the metal cap when you tighten the screw it's critical that you don't drive it too far.
Where do you screw metal roofing?
6:036:54Screwing Metal Roofing. Correct & Incorrect Way Of ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you are installing the metal roofing over metal purlins it will ensure that you fasten the screwMoreIf you are installing the metal roofing over metal purlins it will ensure that you fasten the screw in the center of the purlins.
How do you walk on a COLORBOND roof?
General advice is: Walk closest to the areas around the decking, avoiding laps and ribs. Wear soft-soled shoes. If it feels like you've got debris underfoot, then be careful not to grind it in or you could damage the metal surface.
How far can custom orb span?
Span TableTypes of SpanBMT (mm)0.420.48End Span25002700Internal Span27002700Overhang2002508 more rows
How far apart are roof battens?
Each product has different requirements, for example, batten spacing for (0.42BMT) corrugated metal roofing needs to be no more than 1100 mm apart, but batten spacing for 0.48BMT metal roofing can be up to 1600 mm apart.
What is the minimum pitch for TrIMdEk roofing?
2-degreesMinimum roof pitch Long lengths and a special anti-capillary groove in the side lap allows you to use LySAGhT TrIMdEk on roof pitches as low as 2-degrees (1 in 30).
What is Klip Lok roofing?
Description. Strong, versatile long-length roofing or walling. The concealed fastening method enables its use on many applications from low pitched roofs to vertical or horizontal ribbed walling. Fixing clips secure sheets without puncturing. No exposed fasteners for clean, smooth lines.
Technical Specifications
Sheets are supplied custom cut to length. Minimum and maximum lengths apply. Please contact your nearest Lysaght office for your region for more information.
NCC of Australia Compliance
LYSAGHT® products comply with the National Construction Code of Australia (NCC).
Downloads
LYSAGHT® Build On Inspiration - Design in Steel PDF (10.16 MB). Last updated 27 Jul 2021
Pricing
Pricing for all our products varies based on availability and quantity.
What is Custom Orb Roofing?
Custom Orb is corrugated roof sheeting which is incredibly versatile and can be fastened to both long, straight stretches of roof or curved areas.
Glegg Manufacturing are Custom Orb Roofing Specialists
When the team at Glegg Manufacturing carries out custom sheet metal fabrication, we aim to support Queensland businesses, so we source all Australian steel locally.
What is a custom orb?
LYSAGHT CUSTOM ORB® is the famous Lysaght corrugated profile, equally at home with traditional and contemporary design. It is long, wide, strong, lightweight and economical profile which can be quickly and easily aligned. Add up these features and you have a steel roof or wall cladding that simply offers outstanding value.
Who makes Vent-A-Roof?
A guide to the design and installation of the VENT-A-ROOF® system for steel roofing and walling manufactured by Lysaght. Suitable for all trades and professions involved with specifying and applying the VENT-A-ROOF® range of products.
Is Bluescope Steel Limited liable for content?
The statements, information, and opinions quoted are provided by the featured supplier. BlueScope Steel Limited does not warrant the accuracy or currency of the content and is not responsible or liable for content provided by third parties.
What is custom orb?
CUSTOM ORB® is the famous corrugated profile, equally at home with traditional and contemporary design. It is a wide, strong and lightweight profile that can be quickly and easily installed. Add up these features and you have a steel roof or wall cladding that simply offers outstanding value.
What pitch is a custom blue orb?
special anti-capillary forming in the side-lap allow you to use ConcaveCUSTOM ORB® (or CUSTOM BLUE ORB® used on curved surfaces) for roof pitches as low as 5° (1 in 12).
How many corrugations are in a custom blue orb?
CUSTOM ORB® (and CUSTOM BLUE ORB®) is overlapped at the sides not less than 1.5 corrugations. It is generally considered good practice to use fasteners along side-laps however, when cladding is supported as indicated in maximum support spacings, side-lap fasteners are not usually needed for strength.
Can you use custom blue orb for machine curving?
CUSTOM ORB® is not intended for machine curving. For bullnosing use CUSTOM BLUE ORB®. Long, curved lengths of CUSTOM BLUE ORB® can be easily placed and aligned. From the traditional bullnosed verandah, to the double curves and complex shapes of modern homes and offices, we offer a full range of curving styles to suit almost any building.
What is a custom orb?
It is long, wide, strong, lightweight and economical profile which can be quickly and easily aligned. Add up these features and you have a steel roof or wall cladding that simply offers outstanding value.
What is a Lysaght custom orb?
LYSAGHT CUSTOM ORB® is the famous BlueScope Lysaght corrugated profile, equally at home with traditional and contemporary design. It is long, wide, strong, lightweight and economical profile which can be quickly and easily aligned. Add up these features and you have a steel roof or wall cladding that simply offers outstanding value.#N#Can be used for both roofing and walling applications. Available in a wide variety of COLORBOND® steel colours.#N#Roof sheet lengths of up to 24m can be used before an expansion joint is required. Can be laid flat or sprung curved for increased versatility.
Why use an orb?
Orbs are reusable snippets of code that help automate repeated processes, speed up project setup, and make it easy to integrate with third-party tools.
Explore orb use cases
Save time on project configuration and easily set up third-party integrations.
Reusable commands, executors, and jobs
Orbs define reusable commands, executors, and jobs so that commonly used pieces of configuration can be condensed into a single line of code.
