What is red Kote used for?
Red-Kote is a solvent-based polymer coating forlining gasoline tanks on motorcycles, cars andtrucks. It has limited applications with aviationgasoline, diesel fuel, and some racing fuels. Bio-diesel, racing fuels and methanol-containingfuels/fuel additives should be tested prior to useas they may attack Red-Kote.
What is the active ingredient in red Kote?
Active Ingredient (s): Phenol, biebrich scarlet red, isopropyl alcohol 6.2% by volume. In a soothing, softening vegetable oil base. Dr. Naylor Red-Kote Indications For use as an aid in the treatment of superficial wounds, surface and wire cuts, lacerations, slow healing ulcers, abrasions, rope burns and chafes in horses and dogs.
Where can I buy Red-Kote?
If you are in the Lower 48 United States you may order direct using the links shown. You may also buy Red-Kote by visiting an O'Reilly Auto Parts Store. Scroll down for links to Canadian and Australian inporters. For Alaska, Hawaii and other countries, please e-mail [email protected] or call 1-800-362-9850.
Can you leave Red Kote can open?
Do not leave the can open to the air as it will thickenor form a skin on top. When Red-Kote is reused afterpouring it back out of a gas tank it may need thinningbefore reuse. Red-Kote may be thinned with MEK(Methyl Ethyl Ketone) or Acetone. Do not use lacquerthinner to dilute Red-Kote.
Is red-Kote good?
As a sealant, Red-Kote excels at sealing the often hundreds of pin-hole leaks that occur along seams or where straps wrap around the tank. Once in place, Red-Kote forms a very tough, flexible membrane that will never crack or flake as many competitive products do.
How does red-Kote work?
You fix the obvious leaks and Red-Kote seals the rest. Contrary to what some people will tell you, rust does form inside gas tanks. The causes are condensation in the tank and water in the gas. Red-Kote seals light rust under the coating so it cannot flake off to plug fuel-line filters or cause engine damage.
How long does it take for red-Kote to cure?
It is very important that you DO NOT leave puddles of Red-Kote® in the tank. Open all tank openings to allow the best air flow. Air dry for 8 to 24 hours. When cured there will be almost no solvent smell left in the tank.
How do you use red coat?
7:3015:57How To Seal A Gas Tank With Red Kote Sealer - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo open the red coat and pour it in now make sure to use this stuff in a well-ventilated area. AndMoreSo open the red coat and pour it in now make sure to use this stuff in a well-ventilated area. And they don't recommend shaking it because you'll get air bubbles in it.
What is the difference between blue Kote and red-Kote?
Red-Kote's formula is advertised as speeding the recovery time for scratches and burns, stimulating the growth of new skin and discouraging scar tissue formation. Blu-Kote is purported to be highly effective against pus-producing bacteria and common fungus infections.
How do I protect my gas tank from rusting?
Apply a paint coating to tanks Using a corrosion-resistant finish such as Hammerite Direct to Rust Metal Paint will protect the tank for much longer by repelling water and preventing rust from forming underneath.
What do you coat a new fuel tank with?
Gold Standard Tank Sealer will stop rust and form a tough, fuel impervious coating while sealing small pinholes and weld seams. Your fuel will never touch the inside walls of your tank again.
What can I coat my gas tank with?
POR-15 Fuel Tank Sealer is a high-tech sealer impervious to all fuels, including the new Stage II fuels which have a higher alcohol content, and additives. It has superior strength and fuel resistance. POR-15 Fuel Tank Sealer stops rust, corrosion, and fuel leaks.
What can I use to seal a motorcycle gas tank?
0:0713:42How to Seal a Motorcycle Fuel Tank with KBS Coatings Tank Sealer Kit ...YouTubeStart of suggested clipEnd of suggested clipSo today we're going to show you a new product that we're carrying called KBS tank sealer. It comesMoreSo today we're going to show you a new product that we're carrying called KBS tank sealer. It comes in a kit. It's got a three-part process to it basically three different chemicals. One is a cleaner.
Does red Kote stain?
Although it's a bit messy and definitely will stain anything you get it on, it has worked wonders for some nasty abrasions and other small wounds on our horses over the years. Just keep the tissue liberally coated with red oil and it will deter infection and keep skin moist while healing.
Does fuel tank sealer work?
The fuel tank sealer does much of the work for you, working its way into seams and sealing pin holes. If the tank is suffering from more significant holes or cracks, either welding or sealing them externally with an epoxy repair filler may be required before applying the sealer.
How do you seal a petrol tank?
Put on some gloves Pouring all of the tank seal into the tank move the tank from side to side and upside down to fully coat the interior of the tank when you have coated the tank put it down for 10 minutes, and then repeat the process.
Dr. Naylor Red-Kote
Active Ingredient (s): Phenol, biebrich scarlet red, isopropyl alcohol 6.2% by volume. In a soothing, softening vegetable oil base.
Dr. Naylor Red-Kote Indications
For use as an aid in the treatment of superficial wounds, surface and wire cuts, lacerations, slow healing ulcers, abrasions, rope burns and chafes in horses and dogs.
Dosage and Administration
Clean and dry the affected area thoroughly before spraying. Keep the wound clean and dry.
Detailed Description
Fuel Tank Liner; 1 Quart; Red-Kote is a polymer coating for sealing gasoline tanks on motorcycles, cars and trucks. It is used to seal small leaks caused by rusting and to prevent future internal rusting from occurring. For application the tank must be removed from the vehicle, properly cleaned and thoroughly dried.
Brand Information
Damon Industries is a leading manufacturer of specialty automotive, cleaning and sanitation chemicals for a variety of markets. Damon has been located in Alliance, Ohio since 1938.
FLYER15015
You can buy a reproduction (new) tank from "Chassis Engineering" for $250.00.
JamesR
You can buy a reproduction (new) tank from "Chassis Engineering" for $250.00.
Mark Shaw
If you had used it without thinning, it probably would have worked as expected.
Matt Harwood
I've been very satisfied many times with Gas Tank Renu. They cut open the tank, sandblast it inside and out, re-coat it, and give you a lifetime guarantee. Drop it off, pick it up three days later, ready to install. $400. If the tank is out of sight, it's the only way I'll try to use an old tank.
Matt Harwood
Thanks Matt. You are right on so many levels but I'm invested in this process now. It's me against the tank and I can't give up. Its a man thing. I'm sure you can understand. It is really foolish on my part but isn't that what it means to be a man?
wayne sheldon
If it weren't for the garbage-for-gas we have today, fixing old gasoline tanks in marginal condition would be a piece of cake! I did several of them years ago and got many good years of service from them. In those days, minor pin holes and seam weepages could be remedied by any of several very good gasoline tank sealers.
