What is the depth of a typical Vanity?
The average range for a typical vanity’s depth will be from 17 to 24 inches. The most common depth for vanities, across the board, tends to be 21 inches. This is just under two feet and is just enough space to comfortably sit a sink and all the fixings it needs. Larger-sized depths tend to be more common in two sink vanities.
What is the size of a standard vanity?
What size is a standard vanity unit? Standard widths for vanity cabinets are 24, 30, 36, 48, 60 and 72 inches, however, you may find some in-between sizes out there. The standard depth of a vanity, from front to back, is typically between 20 to 21 inches. However, there are narrow depth options available which are usually 18 inches.
What is "standard" height of bathroom vanity?
Traditionally, the standard height of a bathroom vanity is between 30-32 inches (76-81 cm) tall. As new designs and styles take over, though, that range has widened and you can now get vanities built to whatever height you need. Before you order a custom vanity, though, take time to consider how high it should really be.
What are standard vanity dimensions?
Standard vanity dimensions are typically between 18″ – 72″ wide. For a single vanity, the most popular widths are 24″, 30″, 36″, 48″, and for double vanities the most popular widths are 60″ and 72″, but start at 48″. The standard depth of a vanity is typically around 20″, but narrower options are available.
What is the minimum depth for a bathroom vanity?
21”According to the National Kitchen & Bath Association, “The standard depth is 21” to the front of the box plus the thickness of doors and drawers. Some vanity cabinets used in small baths will be as little as 18” or 16”.” Always confirm that the vanity you choose is deep or shallow enough to work for your bathroom.
How deep should a vanity cabinet be?
The standard size depth for most bathroom vanity and cabinets is somewhere between 21-22 inches deep. Whether you're getting a custom bank of cabinets that attach to the wall, an elegant floating cabinet, or an all-in-one vanity and countertop, this will be the depth.
What is the standard height and depth of a bathroom vanity?
A bathroom vanity has a standard height of 30-36 inches, a depth of 20-21 inches and a wide variety of widths depending on the size of your bathroom.
Are all bathroom vanities the same depth?
Standard widths for vanity cabinets are 24, 30, 36, 48, 60 and 72 inches, however, you may find some in-between sizes out there. The standard depth of a vanity, from front to back, is typically between 20 to 21 inches. However, there are narrow depth options available which are usually 18 inches.
What is the average size of a bathroom vanity?
Pro Tip: The standard bathroom vanity is around 32 inches tall, but sizes range from 30 to 36 inches. If you're choosing a design for a kid's bathroom, opt for a vanity that stands around 30 to 32 inches high.
What is a comfort height vanity?
Comfort Height: In recent years, taller, comfort height vanities have grown in popularity. Comfort height bathroom vanities measure to be about 36 inches in height, compared to the standard 30-inch or 32-inch. The extra inches have become more common as the human population is taller than they were 100 years ago.
What is the average depth of a bathroom sink?
Common Bathroom Sink Sizes Small: From 15 to 20 inches long and nine to 12 inches wide, with a depth between 5-3/4-in. and seven inches. Medium: From 20 to 30 inches long, 19 to 24 inches wide and about seven inches deep. Large: From 30 to 50 inches long, 19 to 24 inches wide and about five inches deep.
What is the most popular bathroom vanity?
The Most Popular Bathroom Vanity ColorsGray Bathroom Vanities. Although gray may not be the first color that comes to mind when researching vanities, it has proven to be an ongoing bestseller. ... Blue Bathroom Vanities. ... Wood Bathroom Vanities. ... Earth-Toned Bathroom Vanities.
How can I make my vanity deeper?
Place wood planks across the back, as needed, to prevent items from falling out the back, and to support the stability of the cabinet. Brace as needed (in corners and on the sides). Once the vanity is taller and deeper, caulk all of the wood joints. Fill nail holes, screw holes, and wood blemishes with wood filler.
How deep is a typical bathroom countertop?
between 19 ½ to 22 ½ inches deepStandard bathroom countertops are between 19 ½ to 22 ½ inches deep. This can also change based on different factors, but as with kitchen countertops, the standard depth of bathroom countertops will help you maximize space.
How is vanity depth measured?
Take a measurement at the widest part of the variety in contact with the the floor, which is your base width. Then, measure across the countertop, which is your top width. Next, to get the depth dimensions of your vanity, take base and top measurements.
What is the average depth of a bathroom sink?
Common Bathroom Sink Sizes Small: From 15 to 20 inches long and nine to 12 inches wide, with a depth between 5-3/4-in. and seven inches. Medium: From 20 to 30 inches long, 19 to 24 inches wide and about seven inches deep. Large: From 30 to 50 inches long, 19 to 24 inches wide and about five inches deep.
How deep is a vanity?
According to the National Kitchen & Bath Association, the standard vanity depth of 21 inches is measured from the back to the front of the box plus the thickness of doors and drawers.
How deep should a vanity be in a small bathroom?
The most common depth of narrow bathroom vanities ranges from 18 and 16 inches. These sizes don’t provide as much countertop or storage space as standard bathroom ...
What is a 20 inch bathroom vanity called?
Bathroom vanities with depths below 20 inches are called narrow depth bathroom vanities or shallow depth bathroom vanities. These vanities are useful when you got a narrow bathroom or space constrained bathroom. In such situations, you can gain floor space by trimming at least part of vanity depth and opting for an 18 or 16 inches deep bathroom vanity.
What does "21" mean in vanity?
Basically, it means the depth of the bathroom vanity’s cabinet box is stated as the depth of the vanity. This standard depth measurement does not include the countertop, so you don’t need to subtract the countertop overhang. That’s why you find vanities for sale with statements like, “21” depth and 22″ countertop”.
What is the best height for a bathroom vanity?
A household with kids and short height people prefer the 32-inch standard height vanities as it’s easy for them to reach and use. Taller and elderly people prefer to go for the 36-inch tall comfort height bathroom vanity because with it they don’t have to bend too much.
How much space does a 21 inch bathroom sink take?
The standard 21-inch depth vanities fit snugly against a bathroom wall and take up less than two feet space from the wall. So even with a countertop overhang of one or two inches in the front it still looks very lean.
How deep should a vanity be?
If your bathroom is tiny, or you want to mount the bathroom vanity in your powder room, you should pick out the 16 or 18 inches (40.5 – 46 cm) deep model. It will visually make the space larger.
How tall is a bathroom vanity?
When it comes to height, standard bathroom vanity dimensions vary from 30 to 32 inches (76 – 81 cm). Several decades ago, when there was only one bathroom in the house, the height of this piece was adjusted so that the children were able to use it.
How wide is a single sink vanity?
Most of the single sink vanities are 30 to 48 inches (76 cm – 1.2 m) wide . The most expansive bathroom vanity dimensions usually come with the double sink vanities. In the US, the standard for double sink vanity is from 60 to 72 inches (1.5 – 1.8 m). Of course, you can purchase a double sink vanity if your bathroom is spacious.
How high should a kitchen cabinet be for a vanity?
It is possible if you have a higher model since most of the standard kitchen cabinets are 36 inches (91.5 cm) high.
Why do you have a closed bottom vanity?
The closed bottom will give you more space for storage and less space to clean. On the other hand, it will be easier to wipe the excess water from the floor when you have the open bottom vanity. In that case, water won’t go underneath and cause damage. It’s up to you to choose the model you like more. 2.
Do you have to remove the old vanity before installing a new vanity?
Be careful and take care not to damage the walls and floor. After removing it, you should clean the area thoroughly, and do the minor wall and floor fixing if needed.
How deep should a vanity be in a corner bathroom?
But as per your preference, you can go for an 8-inch vanity too. For a typical corner bathroom, vanity depth ranges from 24 inches to 18 inches. To get a clear idea you have to measure the vanity depth. It should be measured from the back to the front of the box and the thickness of doors and drawers.
What is the average bathroom vanity size?
So, the depth of most of the bathroom vanities in the market nowadays varies around the standard size. (from 20 to 23 inches.) But you can select a perfect vanity that goes with your preferred bathroom layout.
How wide is a vanity sink?
If we mention the dimensions of various types of vanity sinks, undermount rectangular sinks and countertop sinks might vary from 16 to 24 inches in width and from 12” to 18” in depth. Actual interior bowl dimensions can be 1 1/2 – 2 1/2 inches smaller around the whole sink perimeter.
How tall is a bathroom vanity?
The standard bathroom vanity height is 32 inches. Depending on how tall the user is, this height puts the surface of the countertop at waist high. Or it can even a bit lower than that.
How deep is a standard bathroom sink?
Standard oval and round bathroom sinks have a diameter of 16 to 20 inches and an average water depth of 5 to 8 inches. Standard rectangular sinks measure 19 to 24 inches wide (side to side) and 16 to 23 inches length (front to back). The standard water depth of 5 to 8 inches.
How deep is a vessel sink?
The dimensions of a rounded vessel sink run between 14 to 20 inches in diameter and 4” – 7” in depth. You have to keep in mind that the depth of the vessel should be added to the overall height of the vanity. When I was looking for a vanity sink, I categorized my requirement under a few main areas.
Is it easy to choose the right size vanity?
You soon realize that choosing the right sized vanity is certainly not as easy as you thought in the beginning. Hopefully, this guide will provide you with enough information to make your shopping experience easier with regard to choosing your bathroom vanity size.
How deep is a vanity?
The average range for a typical vanity’s depth will be from 17 to 24 inches. The most common depth for vanities, across the board, tends to be 21 inches. This is just under two feet and is just enough space to comfortably sit a sink and all the fixings it needs.
How much space do you need for a bathroom vanity?
Standard building code says that you need to have at least 18 inches of space from the vanity to the toilet. This helps reduce the chances of gross stuff from the toilet hitting your vanity. Don’t stray too far from your current bathroom’s layout, if you can.
How deep should a corner sink be?
Ultra-small vanities or “corner sinks” tend to be closer to 17 inches deep. With that said, these vanities are starting to vanish from the markets.
How wide is a single sink vanity?
Single sink vanities are going to be between 24 to 40 inches wide. This is enough space for you to have a sink, several drawers, and a little counter space so that you can set your stuff down while you get prepped. Double sink vanities will be between 48 to 72 inches wide in most cases.
What is the best vanity for people who don't want to pull up a chair?
If you tend to like standing, go for a comfort vanity. These are better for people who don’t want to pull up a chair. Most vanities that have sinks tend to be traditional sizes. If you have a vanity with a sink, then there’s no room for a chair.
How tall are bathroom vanities?
There is a traditional height they’re made in, and a more modern height. Here’s what you need to know: Traditional vanities had a height between 30 to 32 inches, maximum. This is considered to be the standard height, even today.
Do people have sit down vanities?
Nowadays, most people don’t have sit-down vanities. Instead, the typical vanity involves people standing up as they sort through all their accessories and do their hair. This means that a traditional height would make most of us crouch down to pick stuff up.
Comfort Vanity Sizes
Comfort vanities—or comfort height vanities—are built for taller people who struggle to comfortably use standard-sized countertops. These bathroom vanities are slightly taller and larger to accommodate more height. You may have to custom order a comfort vanity.
Floating Bathroom Vanity Sizes
Floating vanities are a relatively new style and create the illusion that your sink is floating in mid-air. By mounting the vanity to a wall, you can theoretically place it as high off the ground as you like. Some floating vanities come with a built-in cabinet, while others simply consist of a floating countertop and sink.
How Do Double Vanities Compare?
Click to go to Etsy.com and read more about this White Double Vanity with Sliding Barn Doors from Southern Sap Woodworks.
How to Position a Mirror and Lights Over Vanity
Although you could theoretically pick any sized mirror to hang above your vanity, the size of your vanity and bathroom will largely dictate how large of a mirror you need.
Sizing Your Vanity and Sink
The last thing you should consider as you’re sizing your bathroom for a new vanity is the sink and faucet.
How to Protect Your Vanity from Water Damage
Generally speaking, unless you have a pedestal sink, you should install a backsplash to protect the wall behind your sink. Align the top of the backsplash slightly above the mouth of your faucet to catch any stray water droplets.
How tall is a standard bathroom vanity?
Standard bath vanity height is 32″ . Generally speaking bathroom vanity countertop height can range anywhere from 30″ -36″. Standard height vanities work well in homes that have young children who may be at a disadvantage while using taller vanities.
How tall is a vessel sink vanity?
You can see that the vanity height is 29″ + 6.5″ for the vessel sink for a total height of 35.5″. Generally speaking, a bathroom vanity will be lowered in order to accommodate for the extra height added by a vessel sink. Vessel sinks typically add 5-6″ to the height of the vanity countertop. For example, if you want the rim ...
Why are bathroom vanities taller than vanity height?
Comfort height vanities are taller than standard vanity height in order to reduce the pains of bending over to wash up.
Can you use a vessel sink without children?
If you need an accessible bathroom, sticking with a standard height bath vanity will make day-to-day tasks easier. Vessel sinks are artistic creations that are more suitable for homes without children as they are harder to clean, taller , and can be more fragile. –Click here to Shop for Vanities by Size–.
