What are the standard sizes of plywood?
Plywood proves indispensable in the building and cabinetry trades, so carpenters, cabinetmakers and home hobbyists alike must be familiar with the standard sizes in which it is available. A standard sheet measures 4 by 8 feet and comes in a range of thicknesses, with specialty sizes also available. A cloesup of plywood.
What is the thickness of lauan plywood?
It comes in 5- by 5-foot sheets, and its nominal thicknesses, which are usually expressed in metric units, are 3, 6, 9, 12 and 18 mm, corresponding to 1/8, 1/4, 3/8, 1/2 and 3/4 inches. Plywood manufacturers use lauan -- sometimes called Philippine mahogany -- to make a utility-grade plywood for cabinetry and interior woodwork.
What kind of plywood do we offer for the furniture industry?
We offer special quality plywood for the furniture industry such as Birch plywood, particle boards, and veneer panels. We represent a number of brands and special quality plywood for the furniture industry. Our Russian Birch plywood is offered from 6 to 24mm thickness in 5×6 and 8×4′ panel sizes.
What size plywood does Home Depot sell?
In addition to these standard sizes, home improvement stores like Home Depot carry pre-cut panels in various other sizes including 2 by 2, 2 by 4, and 4 by 4 feet. Softwood plywood is commonly found in sheets 4 feet wide, 8 feet long, and 3/4 inch thick. Some stores even sell oversized sheets up to 6 feet wide.
What is the standard size of plywood?
4' x 8'A standard sheet of plywood is 4' x 8' and will cover 32 square feet. The 4' x 8' size correlates to the spacing on floor joists, roof trusses or wall studs for easy installation. The next common size down is 5' x 5' and will cover 25 square feet.
What are the actual dimensions of 4x8 plywood?
x 8 ft.; Actual: 0.438 in. x 48 in. x 96 in.)
What does 4x8 for plywood mean?
As described, the most common size for a sheet of plywood is 4 x 8 feet. Hardwood plywood is also available in sizes 2 x 2 feet, 2 x 4 feet, and 4 x 4 feet. Utility plywood is available in sheets that are longer, measuring 4 x 10 feet.
What size is an 8x4 sheet?
Size ConversionsMetric (mm)FeetInches2440 x 12208 x 496 x 482440 x 18308 x 696 x 722745 x 12209 x 4108 x 482745 x 18309 x 6108 x 7222 more rows
What is the standard size of plywood?
Common Plywood Sheet Sizes. Hardwood Plywood comes in many lengths and widths, but the two most common sizes are 4 x 8 and 5 x 5 feet. Standard sheets are 1/2 inch thick, while non-standard thicknesses range from 1/8 inch to 3/4 inches.
How much does plywood weigh?
In addition to being sturdy, plywood is also heavy. It weighs about 2.5 lbs per square foot, meaning a standard 4×8 sheet weighs 80 lbs. Of course, it’s also highly absorbent, so this weight will increase if the board gets saturated. Read on to learn about the standard plywood sheet sizes and types you can buy.
What is hardwood plywood?
Hardwood Plywood. This is made from Alder, Ash, Beech, Birch, Bamboo, Cherry, Mahogany, Maple, and other hardwood trees. Hardwood is used for carpentry projects like cabinetry, making furniture, and other decorative applications. Sheets are usually sanded to make a smooth surface and can be stained or painted.
How thick is plywood?
Plywood’s Actual Thickness. Although standard plywood sheet sizes range from 1/4 to 3/4 inch thicknesses, it’s actually slightly thinner. This is because after it’s manufactured, plywood shrinks as it dries. So, when you are buying a standard utility-grade sheet, the actual size will be as follows:
What is plywood made of?
Plywood is not a specific type of wood, but rather a category of material made from thin layers of wood glued together to form long sheets. The grain of each layer is rotated 90 degrees to improve strength, reduce shrinkage, and prevent the wood from splitting. Sub-categories include MDF, OSB, and particle board.
What is the tolerance of utility grade plywood?
While this varies by type, utility-grade sheets have a tolerance of 1/32 inches and cabinet-grade sheets have a tolerance of 1/64 inches. This means that higher-grade plywood is held to a higher standard than lower-grade material.
Does plywood shrink when wet?
In fact, all wood expands as it gets wet and shrinks as it dries. Remember, plywood is made from many layers of thin wooden sheets. And the top layer needs to be sanded after the sheet is made. During this process, 1/32 inches is typically removed from each sheet.
How long is plywood?
Hardwood plywood comes also in abbreviated sheets measuring 2 by 2, 2 by 4, and 4 by 4 feet, while utility-grade plywood comes in longer 4-by-10-foot sheets. You can also buy oversized 5-foot-wide utility-grade plywood with lengths of 6, 8 and 10 feet. All but the oversized sheets are available in metric equivalents. Advertisement.
What is plywood measured in?
The widths and lengths of plywood sheets manufactured for use in the U.S. are measured in English units, while those manufactured for use in Europe, Canada, Japan and other countries that use the metric system are measured in metric units.
What is the thickness of lauan plywood?
It comes in standard 4- by 8-foot sheets with thicknesses of 1/8, 1/4, 5/16 and 3/4 inches. Advertisement. references.
What is top grade plywood?
Top grade -- or sanded -- plywood has an outer skin of quality hardwood or softwood, which is free of knots and defects. This is the preferred material of cabinetmakers and interior woodworkers. Its size tolerances -- especially for thickness -- are smaller that those for the utility-grade plywood used in the building trades for roof ...
What is Baltic Birch plywood?
Baltic birch plywood is a particularly fine grade of plywood that is manufactured primarily for the European market. It comes in 5- by 5-foot sheets, and its nominal thicknesses, which are usually expressed in metric units, are 3, 6, 9, 12 and 18 mm, corresponding to 1/8, 1/4, 3/8, 1/2 and 3/4 inches. Plywood manufacturers use lauan -- sometimes called Philippine mahogany -- to make a utility-grade plywood for cabinetry and interior woodwork. It comes in standard 4- by 8-foot sheets with thicknesses of 1/8, 1/4, 5/16 and 3/4 inches.
How big is a sheet of plywood?
A standard sheet is 4 by 8 feet and can be found in a series of thicknesses, with specialized sizes likewise offered for crafting projects or large construction ...
How thick is 3/8 plywood?
Therefore, a sheet of plywood with a stated thickness of 3/8 inch is, in fact, 11/32 inches thick.
What is plywood tolerance?
Size Tolerances. Plywood is made of thin sheets of softwood glued together in layers, with the wood grain of each layer perpendicular to the next. Its size tolerances– particularly for thickness– are smaller than those for the utility-grade plywood utilized in the construction trades. The tolerance for utility plywood is 1/32 inch, ...
How big are Baltic birch panels?
Baltic birch panels (a kind of plywood including birch veneer) often come in 5 x 5-feet panel s.
Is it easier to cut plywood or framing?
Dealing with big sheets of plywood will be a lot easier utilizing these standard techniques for precise design, cuts, and assembly. Keep in mind that if you are using the larger, utility-grade plywood, you’ll need more framing to keep it sturdy.
BIRCH PLYWOOD
Our Russian Birch plywood is offered from 6 to 24mm thickness in 5×6 and 8×4′ panel sizes. Our Birch plywood is Carb2 compliant, which is important for furniture producers who are exporting the production. Comes in different qualities, both from stocks and for direct import.
PLYWOOD
We carry our own two brands of imported plywood: NEPTUNE which is our Marine plywood with WBP glue, and SAN MATEO which is a good quality ordinary plywood. 4x8ft in various thicknesses.
VENEERED PANELS
We carry one of the best international brand KD Panels from Taiwan www.twkd.com which is available pre-finished for interors or un-finished for furniture production.
How big is plywood?
Plywood price are based on the average cost of a sheet or board. The standard dimension of plywood is 4 feet x 8 feet. Price currency is in Philippine Peso (Php).
What is plywood made of?
It is widely used by builders on craft, repairs and construction since it easily and readily available. Plywood boards are made of thin slices of natural wood stacked together at several layers. It has high strength, dimensional stability, lightweight, and flexible. It can be seen on applications such as sheathing, roof deck, hoardings, crates, internal structures, boxes and furniture. Plywood price are based on the average cost of a sheet or board. The standard dimension of plywood is 4 feet x 8 feet. Price currency is in Philippine Peso (Php). Value added tax is already included on the listed cost.
