What is the Thompson technique in chiropractic?
"The Thompson Technique is a full-spine adjusting technique that emphasizes high-velocity, low amplitude, and some low-force procedures, using a drop table as an indispensable adjunct. At the heart of the analytic component of the Thompson Technique is the Derifield leg check, adapted from the original work of Dr.
What is the most effective chiropractic technique?
There are many chiropractic methods doctors use, but the Gonstead procedure is the most effective. It helps to detect where the pain comes from before the chiropractor administers treatment.
What is a Thompson table?
This is a technique that was originated in the 1950's by Dr. Clay Thompson. The technique uses an adjusting table with segmented drops. These drops lower various parts of the patient's spine quickly, either in the dorsal, lumbar, or pelvic areas, depending on which area is being treated.
What is the Gonstead technique?
A Gonstead chiropractor looks at the whole person and searches for the source of a patient's pain or discomfort by examining spinal misalignments, nerve dysfunction, foundational imbalance, and motion disturbances. Adjustments are then made to help restore natural spinal alignment and optimal movement.
What are three methods chiropractors use?
Three Methods Chiropractors Use to Treat Back PainManual Therapy. Manual therapy is what the layperson most often associates with chiropractic care. ... Soft Tissue Therapy. ... Exercise Therapy and Self-Management.
Why do chiropractors put wedges under your hips?
To adjust the bottom of the spine (sacrum/pelvis area), chiropractic physicians use pelvic blocks. These blocks are wedge shape and are placed under the patient's hips. The blocks serve as a fulcrum to allow the body to do the adjustment, rather than a thrust from the chiropractic physician.
Why do chiropractors use drop table?
A drop table enables chiropractors to get both hands on the patient during a full spinal examination. If a chiropractor notices rotation in the cervical spine, for example, they can quickly apply adjustments via the drop table before resuming their analysis of the spine.
What is an activator used by chiropractors?
The activator method used in spinal adjustment can be described as follows: It is a hand-held, spring-loaded instrument that provides low force-impulses to targeted areas. The instrument releases rapid pulses that the muscles aren't able to tense. Thus the muscles cannot resist the treatment.
What is the Sacro Occipital technique?
The Sacro Occipital Technique sees your Chiropractor use precise, light adjustments to stimulate healthy nerve function. This particular technique uses custom wedge-shaped blocks that allow your body to maintain complete balance, while the procedure is performed.
What are the two methods of chiropractic?
8 Types of Chiropractic Adjustments and How They WorkThe Diversified Technique. ... Spinal Manipulation. ... Thompson Drop-Table Technique. ... The Gonstead Adjustment. ... The Activator Method. ... Flexion Distraction. ... Spinal Decompression. ... Extremity Manipulation.
Why do chiropractors use clickers?
The Activator device is designed to mimic the effects of a manual spinal adjustment. Some chiropractors use the device because they find it is a more precise way of manipulating the spine. Due to the speed of the instrument, muscles are less likely to tense during treatment.
What do chiropractors use to relax muscles?
Chiropractors also use TENS machines, which stimulate your body's nerves and muscles through an electric current. The TENS machine allows you to relax, which lets your doctor better manipulate your body with greater ease to relieve your pain.
How do I get the most out of my chiropractic adjustment?
8 Proven Tips to Get the Most Out of Chiropractic CareBe Consistent. ... Stay Hydrated. ... Get Plenty of Rest. ... Maintain Good Posture. ... Stick To A Healthy Diet. ... Maintain an Active Lifestyle. ... Take an Epsom Salt Bath After Every Adjustment. ... Ice Your Muscles.
How many chiropractic adjustments does it take to feel better?
Multiple studies have shown that about 12 total treatment sessions with a chiropractor over a 6-week period is commonly enough to complete a treatment program for back pain relief,1 especially when combined with other treatments.
How many chiropractic sessions does it take to feel better?
Common Chiropractic Adjustment Frequencies To achieve maximum benefits, most injury and pain types will need somewhere between four and twelve sessions. Ongoing maintenance is used to prevent pain from coming back and to prevent additional injuries from forming due to a misalignment of the spine.
Do chiropractic adjustments work permanently?
The long-term effects of chiropractic care bring about real restoration to your body functions and true correction of any issues or problems. It will provide relief from multiple ailments and most pains, but it is a long-term and permanent solution rather than a quick fix and short, temporary relief.
What is Thompson technique?
The Thompson Technique offers both an analysis and adjusting protocol. The technique allows for a gentle and effective adjustment for both the doctor and the patient.#N#The leg check analysis provides a systematic approach to the location and correction of Vertebral Subluxation.
When was the first drop head piece invented?
J. Clay Thompson when he developed the first “drop” head piece in 1952.
Time-Tested & Effective
Thank you for visiting the J. Clay Thompson Technique Foundation website. The JCTTF is a non-profit organization dedicated to promoting the Thompson Technique —and this is the official site to find certified instructors. Dr. Thompson often stated Chiropractic is the greatest profession in the world—and we agree!
About
The Thompson Technique utilizes a uniquely designed segmental drop table that allows for a high-speed, low-force adjustment. The analysis is based on performing accurate leg checks and relating the results to five specific findings.
About
Dr. J. Clay Thompson was a pioneer in both the development of Chiropractic equipment and the neurological approach to analyzing the human frame. His patented drop mechanism and spinal analysis are some of the most widely utilized approaches in Chiropractic care.
Join Today
Become a part of a bigger community of like-minded Chiropractors who prefer the Thompson Technique. We greatly appreciate your support in our common mission to spread the word, provide support, and ultimately give the gift of better health to the world!
Find A Doctor
We’d like to help you find the support you need, whether you’re in need of Chiropractic care from a certified practitioner, or you’d like to find a certified instructor.
Helpful Resources
Our board is working hard to make sure we can provide you with all the information you need on technique manuals and adjusting tables. If the information you are looking for isn’t here, please reach out to us.
How is instrumentation/Thermography used in the Thompson Technique?
Glenn Stillwagon and Dr. Vern Pierce when they developed the DTG. He was very excited about the Visitherm II that Drs., Glenn and Kevin Stillwagon developed and thought every DC should read the book Segmental Neuropathy. In the early days, Dr. Thompson used the NCM and pattern work. With the DTG, doctors were also able to look at segmentally hot and cold areas. The science has shown that the goal in thermography scans should be reaching thermal symmetry within .5 degrees C as well as eliminating segmental hot and cold bands greater than 1 degree Celsius.
How is the Thompson Technique different from other Chiropractic techniques?
The Thompson Technique includes both a leg check analysis and adjusting procedures. The technique is performed on a Thompson Table (drop table) that was developed by Dr. Clay Thompson.
Can pregnant patients be adjusted prone on the Thompson Table?
Yes, the pelvis piece raises so that the patient can lay prone very comfortably and be adjusted according to Thompson Technique procedures or Logan Basic Technique.
Does the Thompson Technique use X-Ray as part of its analysis?
Dr. Thompson took X-Rays on all of his patients. He did not use the X-Rays as part of his analysis, however, felt it was important to know “what not to adjust.” Dr. Thompson expected to see positive changes on post X-ray. For the upper cervical area, Dr. Thompson adjusted patients using Toggle Recoil and used X-Ray analysis for getting listings. He even invented an X-Ray head clamp so doctors could get more accurate films.
Can other Chiropractic techniques be used on the Thompson Table?
Yes, when Dr. Thompson developed the full spine drop table, both he and Dr. BJ Palmer believed this new principle of the drop mechanism would allow for techniques that have not yet been imagined. Many of Dr. Thompson’s students have gone on to develop their own techniques on the drop table. Some of these include Dr. Vern Pierce and Glenn Stillwagon, Dr. Joe Stucky, Dr. Alan Brady, and Dr. Terry Brady. Dr. Clarence Gonstead’s brother Mert utilized the Thompson Table and created an adjusting technique on the table as well. As a foundation, we believe many great techniques are yet to be developed on the Thompson Table.
Can Thompson Technique be used on children and elderly patients?
Yes the table has a “weighing” system where the drop pieces are set just slightly heavier than the patient’s body weight. This allows for a gentle, yet effective adjustment for patients of all ages.
Where does the Apple Logo come from in the Thompson Technique?
The drop mechanism is based on Newton’s First Law of Motion. If an object is motionless, it will stay motionless unless acted upon by some force. If an object is moving at a constant velocity, it will continue at that velocity unless an opposing force is met. When a Chiropractor provides an adjustive thrust, that force moves through the patient and through the drop piece. When the drop piece hits bottom, Innate makes the correction. Sir Isaac Newton was said to have been sitting under an apple tree when an apple fell on his head. This lead to his publicizing his Theory of Universal Gravitation in the 1680s. Dr. Thompson chose Newton’s apple as the logo for the technique for this reason.
Why is Thompson Technique so widely used?
Why is the Thompson technique so widely used? Patients treated with this time-tested technique can see welcome improvements in their posture, flexibility, strength, and function. Many also report experiencing less pain and discomfort and enjoying better sleep.
How effective is Thompson's technique?
It's clear that the Thompson chiropractic technique's use of carefully coordinated drops is highly effective. However, the idea of dropping a patient strikes many people as decidedly unconventional, so it's easy to understand why some might wonder what inspired Dr. Thompson to develop his technique. Apparently, Dr. Thompson began his chiropractic career with an office furnished with a used table and a somewhat shaky headpiece that was prone to dropping slightly. When he eventually replaced it with a new table, his patients complained and he noticed a change in the results of his treatment efforts. These observations would lead him to evaluate the usefulness of intentional drops and paved the way for the development of the Thompson technique.
When was the Thompson Chiropractic Technique invented?
The Thompson chiropractic technique was developed by Dr. J. Clay Thompson and patented in 1955 . It has been used to reduce discomfort and support wellness for more than 60 years and remains one of the most popular techniques in the repertoire of modern chiropractors.
Who invented the drop headpiece?
The Thompson technique was introduced by Dr. Clay Thompson who was granted the patent of the drop headpiece in 1955. This then led to the creation of the table with drop pieces for adjusting the lumbar, dorsal, and pelvic area in 1957. Today, there are many manufacturers of drop tables used across the globe. According to the National Board of Chiropractic Examiners, 55.9% of chiropractors utilize the Thompson technique, and could possibly be more as this job analysis of chiropractic has not been performed since 2000.
Should I Use the Thompson Technique?
Many chiropractors already utilize the Thompson technique along with others in their practice depending on the patient needs. The unique characteristics of the Thompson technique allow you as the provider to make yourself more readily available to all walks of life that may need a gentler technique such as Thompson. As a chiropractor, it is important to always be open to learn and grow with new techniques to make you and your practice more versatile. There may just be a patient out there who needs exactly what you have to offer if you implement this technique.
What are the benefits of Thompson Technique?
The primary benefits of the Thompson Technique are improved posture, strength, flexibility, and performance as well as greater resistance to injury in the adjusted area . Patients also report improved ability to sleep and relax, reduced aches and pains and increased tolerance to stress.
Why do chiropractors use Thompson technique?
This helps the chiropractor to determine the exact nature of the adjustment that needs to be performed.
What is the name of the technique used to manipulate the spinal cord?
One of the most popular of these methods of spinal manipulation is the Thompson Technique, first introduced by Dr. J. Clay Thompson and patented in 1955.
