Vulkem® 116 is a textured, single-component, moisture-curing, gun-grade polyurethane sealant. Basic Uses Vulkem 116 is an excellent general-purpose sealant designed for use on poured and precast concrete, masonry work, window and door perimeters, and similar types of construction joints. Vulkem 116 is approved for exterior use only.
What is a vulkem 116 sealant?
Vulkem® 116 is a textured, single-component, moisture-curing, gun-grade polyurethane sealant. Vulkem 116 is an excellent general-purpose sealant designed for use on poured and precast concrete, masonry work, window and door perimeters, and similar types of construction joints. Vulkem 116 is approved for exterior use only.
What kind of sealant do you use on an Airstream?
Vulkem 116 is perfect for sealing the seams between Airstream body panel segments. It works well with riveted areas creating a water tight seam. Vulkem 116 is an excellent general-purpose sealant designed for use on poured and precast concrete, masonry work, window and door perimeters, and similar types of construction joints.
Do I need a primer for my vulkem 116?
Vulkem 116 typically adheres to common construction substrates without primers; however, Tremco always recommends that mock-up or field adhesion test be performed on the actual materials being used on the job to verify the need for a primer, proper cleaning and prep requirements.
What are the safety requirements for the use of a uvvulkem 116?
Vulkem 116 is designed for exterior and interior use. • Do not apply over damp or contaminated surfaces. • Use with adequate ventilation. Conforms to U.S. Federal Specification TT-S-00230C, Type II, Class A and ASTM C920, Type S, Grade NS, Class 25, Use NT, M, T, A, I, O, and CAN/CGSD-19.13, MCG-2-25-B-N. Conforms to USDA approval standards.
What can polyurethane sealant be used for?
Polyurethane sealers are flexible and versatile construction sealants appropriate for a number of surfaces like wood, metal, plastic, masonry, aluminum, stucco and much more. They're water tight and flexible under any weather condition, making them perfect for sealing gaps and joints on the exterior of structures.
Is Vulkem 116 waterproof?
One-part, moisture-curing, gun-grade, waterproof, polyurethane sealant. SKU: VULKEM-116.
How long does Vulkem caulk last?
What is the shelf life for polyurethane sealants? The shelf life for Tremco polyurethanes is 6 to 24 months depending on type of sealant and/or packaging. Please contact Technical Service for specific shelf life of a product at 866-209-2404.
How long before Vulkem can get wet?
Vulkem 116 generally cures at a rate of 1/16" per day at 75°F (24°C) and 50% relative humidity. It will skin in 5 hours and be tack free in 30 hours. The cure time will increase as temperatures and/or humidity decrease.
How long does it take for Vulkem 116 to cure?
5 hrVulkem 116 generally cures at a rate of 1/16" (2 mm) per day at 75 °F (24 °C) and 50% RH. It will skin in 5 hr and be tack free in 30 hr. The cure time will increase as temperatures and/or humidity decrease. A good rule of thumb is one additional day for every 10 °F decrease in temperature.
Is polyurethane better than silicone?
Silicone caulk is far superior to polyurethane for certain applications. It adheres very well to almost any material but it does not adhere well to wood surfaces. Also, silicone caulk is not paintable, so be careful about where you use it. The silicone in the caulk prevents the paint from bonding with the caulk.
What is the difference between urethane and polyurethane sealant?
There is really no difference between the terms "urethane" and "polyurethane. " When it comes down to it, describing something as polyurethane vs. urethane really just refers to the basic chemical structure of the material. Many people refer to polyurethane and urethane products interchangeably.
What kind of caulk is completely waterproof?
silicone caulkIn general, silicone caulk is usually ideal for waterproofing because it is 100% waterproof, however some types of specialty caulk may use waterproofing technology that is superior to that of silicone.
Will polyurethane caulk stick to itself?
Sikaflex+ Self Leveling Sealant and all of Sika's polyurethane sealants will bond to themselves. The surface of the sealant must be clean.
How do you use Vulkem?
5:508:35How to Apply Vulkem® 350NF/346/346 - YouTubeYouTubeStart of suggested clipEnd of suggested clipApply Volcom 350 nm at 25 mils or 0.64 millimetres thick with a roller or notched trowel. IncludingMoreApply Volcom 350 nm at 25 mils or 0.64 millimetres thick with a roller or notched trowel. Including overall detail coats but excluding expansion joints the Volcom 350 nm needs 4 to 6 hours to cure at
How do you remove Vulkem caulk?
I use a heat gun on a lower setting to soften the Vulkem, then a wooden or plastic scraper. I use sharpened popsicle sticks, tongue depressors or orange sticks (used for manicures). Mineral spirits will also help soften it and get the final residue off.
How long before you can use shower after sealing?
It is recommended to wait an absolute minimum of three hours, and up to 12 in some cases, before allowing water to come into contact with fresh shower sealant or caulk.
How do you remove Vulkem caulk?
I use a heat gun on a lower setting to soften the Vulkem, then a wooden or plastic scraper. I use sharpened popsicle sticks, tongue depressors or orange sticks (used for manicures). Mineral spirits will also help soften it and get the final residue off.
How do you remove Vulkem from skin?
I found a "paintbrush cleaner", for example, that contained both, and it did a great job of removing fresh Vulkem without damaging my trailer's aluminum skin.
Is polyurethane sealant paintable?
Polyurethane sealant is organic and after curing time it can be painted over and even sanded successfully to the same finish as other surfaces.
Can Vulkem be used indoors?
Vulkem 116 is approved for exterior use only. Do not use this product inside an occupied building even if there are no occupants present during use.
What is Vulkem 116?
Vulkem 116 is an excellent general-purpose sealant designed for use on poured and precast concrete, masonry work, window and door perimeters, and similar types of construction joints. Vulkem 116 is approved for exterior use only.
How long does it take for Vulkem 116 to cure?
Vulkem 116 generally cures at a rate of 1/16" (2 mm) per day at 75 °F (24 °C) and 50% RH. It will skin in 5 hr and be tack free in 30 hr. The cure time will increase as temperatures and/or humidity decrease. A good rule of thumb is one additional day for every 10 °F decrease in temperature.
Does Tremco make warranties?
Tremco warrants its Products to be free of defects in materials, but makes no warranty as to appearance or color. Since methods of application and on-site conditions are beyond our control and can affect performance, Tremco makes no other warranty, expressed or implied including warranties of
Documentation
The Chas E. Phipps Tech / SDS Documents system is a search service to product information for the Concrete, Finishes, Masonry and Thermal and Moisture Protection Divisions. All documents are in pdf format and have been compiled from manufacturer websites.
Product Description
Vulkem 116 is an excellent general-purpose sealant designed for use on poured and precast concrete, masonry work, window and door perimeters, and similar types of construction joints. Vulkem 116 is approved for exterior use only.
What is Vulkem 116?
Vulkem 116 is an excellent general-purpose sealant designed for use on poured and precast concrete, masonry work, window and door perimeters, and similar types of construction joints. Vulkem 116 is approved for exterior use only. Application.
How to apply Vulkem 116?
Vulkem 116 is easy to apply with conventional caulking equipment. Ensure that the backer rod is friction-fitted properly and any primers have been applied. Fill the joint completely with a proper width-to-depth ratio, and then tool to ensure intimate contact of sealant with joint walls.