What is Foamular® insulation?
FOAMULAR ® insulation weighs considerably less than plywood, OSB or other non-insulation material so it's easier, faster and safer to install. Plus, the product's built-in rigidity means it can be scored and snapped, cut, or sawed with common tools.
Why choose Foamular ® 150 rigid foam XPS insulation for exterior walls?
FOAMULAR ® 150 rigid foam XPS insulation for exterior walls contains hundreds of millions of densely packed air cells to provide excellent thermal performance. It’s also virtually impervious to moisture, preventing loss of R-value due to moisture penetration.
What is the R value of Foamular?
With its R-value of 5 per inch of thickness, FOAMULAR® helps you chase away the chill for a home that is cozy and comfortable. Owens Corning FOAMULAR® 250 Extruded Polystyrene (XPS) Insulation is a closed cell, moisture-resistant rigid foam board well suited to meet the needs for a wide of building applications.
What is Foamular tape used for?
Product Description. Owens Corning Foamular JointSealR Tape is a tape for insulation seams and is used to seal the joints of FOAMULAR extruded polystyrene (XPS) board in vertical wall applications as continuous insulation over steel or wood wall framing, or as masonry cavity wall insulation.
See more
What type of foam is FOAMULAR?
extruded polystyreneFOAMULAR is a rigid insulation board made of extruded polystyrene. XPS for short. Compared to EPS products, FOAMULAR XPS has 25% more insulating power and is 10 times more water resistant.
What is FOAMULAR insulation made of?
Foam board insulation are rigid panels of insulation that are made of either polystyrene, polyisocyanurate, and polyurethane, according to the U.S. Department of Energy.
What kind of foam is pink insulation?
Extruded PolystyreneExtruded Polystyrene. This foam board insulation is the rigid pink or blue panels that can be found at home centers in many different thicknesses. It is denser than EPS and provides more R-Value with a rating of 5 per inch of thickness.
Is Foamular XPS or EPS?
0:163:44XPS vs. EPS: Science Doesn't Lie - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith the XPS continuous extrusion process a homogeneous closed cell matrix is produced through theMoreWith the XPS continuous extrusion process a homogeneous closed cell matrix is produced through the entire cross section of the foam. This matrix of closed cells resists water penetration.
Does FOAMULAR need a vapor barrier?
The answer is, no. Walls must be assessed for vapor performance. The perception is, 1) liquid water runs off of foam plastic insulation, therefore, 2) it must be water impermeable, and, the misconception, 3) therefore it must be a vapor barrier.
Can FOAMULAR get wet?
Unlike other rigid foam insulations, testing proves FOAMULAR® insulation maintains its R-Value even when exposed to standing water, wet soil and more.
What is pink insulation made of?
Pink® Batts® glass wool insulation is made from over 80% recycled glass along with ingredients - sand, soda ash, borax and limestone. These raw materials are weighed and mixed to the required formula. The other important component is resin, which is used to bind the glass wool together.
What is the difference between pink and blue foam board?
Foam Board Construction As far as their insulating abilities are concerned, pink and blue are identical, with an R-value of 5 per inch of thickness on a piece of new rigid foam board. R-value means resistance to heat flow, which could also be seen as resistance to allow heat to flow through the material.
Which foam board insulation is best?
PolyisocyanuratePolyisocyanurate: Known as polyiso for short, polyisocyanurate foam has the highest R-value per inch (R-6.5 to R-6.8) of any rigid insulation.
Which is better XPS or EPS?
In general, when comparing EPS and XPS board densities, the compressive strength of XPS is greater than that of EPS. For EPS to achieve the same compressive strength as XPS, the density of the foam would need to be increased, often resulting in a greater thickness of board being required.
Are EPS and XPS the same?
XPS is manufactured in a continuous extrusion process that produces a closed cell form of foam insulation. EPS, on the other hand, is manufactured by expanding spherical beads in a mold and then using heat and pressure to fuse the beads together. Each product has proponents claiming one out performs the other.
Is XPS foam the same as Styrofoam?
Styrofoam is a trademarked brand of closed-cell extruded polystyrene foam, or XPS. This foam is also referred to as “Blue Board” and is used for building insulation, thermal insulation and water barriers.
Is FOAMULAR toxic?
Acute Toxicity: Dusts may cause mechanical irritation to eyes and skin. Ingestion may cause transient irritation of throat, stomach and gastrointestinal tract. Inhalation may cause coughing, nose and throat irritation, and sneezing.
What is FOAMULAR insulation used for?
FOAMULAR® Insulation is used in many residential and commercial construction applications. Its uses range from below grade in foundations, to under concrete slabs, to all types of wall construction (steel and wood stud, masonry and concrete), and in commercial roofing systems.
What is InsulFoam made of?
InsulFoam FL (Flute-Filler) is a custom-made, engineered insulation consisting of a superior closed-cell, lightweight expanded polystyrene (EPS).
What is XPS foam insulation?
What is XPS? Expanded Polystyrene, referred to as XPS, is a closed cell insulation product commonly used in remodeling and new construction applications. Due to the manufacturing process, XPS insulation is typically available only in standard dimension square or rectangular boards.
What insulation is best for ice fishing?
For ice fishing enthusiasts looking for an insulation solution for your structure, we recommend FOAMULAR® XPS. Whether you are building a habitat from scratch or converting an existing structure, these boards can be cut to any size and attached to any surface. This is a more precise and less messy approach than using a spray foam technique.
Can you cut foam boards?
The foam boards can be easily cut and sanded to virtually any shape or design. They come in a range of widths and thicknesses so be sure to check out the product page to find the best size for your project.
Can foam insulation be used under concrete?
For use under slabs, in a variety of compre ssive strengths suitable for the lightest residential to the heaviest industrial floor loads, FOAMULAR® insulation is durable enough to be walked on while placing slab reinforcing and concrete.
Is foam insulation waterproof?
FOAMULAR® sheathing and masonry wall insulation products are highly water resistant for cavity applications. They maintain their R-value over the life of the building and provide a “continuous insulation” layer prescribed by ASHRAE 90.1
Does foam insulation protect against backu001flling?
On foundations, moisture-resistant FOAMULAR® insulation insulates while at the same time its durability protects waterproofing membranes from backu001flling damage, putting one more obstacle in water’s path (soil to foundation).
What is Owens Corning foam insulation tape?
Owens Corning Foamular JointSealR Tape is a tape for insulation seams and is used to seal the joints of FOAMULAR extruded polystyrene (XPS) board in vertical wall applications as continuous insulation over steel or wood wall framing, or as masonry cavity wall insulation. The durable backing, coated with an aggressive acrylic adhesive offers excellent adhesion, strength, handleability, and flexibility. JointSealR Foam Joint Tape will move along with building materials as they flex and adjust to the change in seasons, allowing it to stay in place and not create gaps in the weather barrier.
Do flashing tapes stick to foam?
Jobs go better with the correct products. Couldnt find anything local that was appropriate, flashing tapes do not stick to foam well. This was the right product, and it was at my door less than 24 hours after ordering. Exceptional service, would order again.
Does tape stick to foam?
Tape is very sticky and adheres well to the foam panel, and everything else. I wanted tape specifically designed to stick to foam, not some general purpose tape. I used the tape to seal my new addition from water and air penetration into the house. Finish the job right with this tape.
