The head size of the plug can be 13/16”, 7 /8” or 15/16” so you might get confused while buying. Well, the correct size for the RV water heater is 15/16”. So, if you find that anywhere make sure to put it on your shopping list.
How to drain water heater tank in RV?
How to Drain an RV Water Heater Tank?
- Disconnect the Drain Plug. The first step is to turn the pressure relief valve off. ...
- Open the Drain Valve. ...
- Attach a Hose to the Drain Valve. ...
- Flush with Clean Water. ...
- Allow The Water to Cool Off. ...
- Disconnect the Hose and Close Up All Openings. ...
- Turn the Water Pump Back On. ...
- Check for Leaks. ...
- Reconnect All Components. ...
- Call a Professional if Needed. ...
How to fix a RV water heater?
Troubleshooting Water A Water Heater Signal System
- Ensure that the sensors have been replaced to boost efficiency with all the RV systems
- Check whether the burner tube is obstructed
- Call in the experts to check the thermocouple
How to use your RV water heater?
- Use a clean hose to bring fresh water into your RV, otherwise you could contaminate the water.
- If you have a tankless water heater, then just connect a hose to the intake and a water source. You don’t have to fill a tank.
- Your RV may have particular instructions on filling the tank, so always check with the manual first.
How to replace RV water heater anode rod?
Steps to Change an RV Water Heater Anode Rod
- Turn off the Propane, Electricity, and Water to the RV Water Heater. ...
- Empty the RV Water Heater. After turning off the power and water to your RV, you can now drain out the water from the water heater tank so ...
- Remove the RV Water Heater Anode Rod. ...
- Inspect the RV Water Heater Anode Rod. ...
- Replace the RV Water Heater Anode Rod. ...
What size is my RV water heater drain plug?
Specially designed wrench with 7/8" and 15/16" openings fits most RV drain plugs.
What size socket do I need for RV hot water heater?
The specially designed socket wrench has a 1-1/16” hex socket on one end for anode rod and 1-1/2" hex socket on other ends for a water heater element with an 8mm hole for turning. Save Money by Buying Bundle and keep a few spare in your RV just in case while you are camping.
What size is the drain plug on a Dometic water heater?
1/2"Dometic™ Atwood 91857 RV Water Heater Drain Plug - 1/2" MPT.
What size is Atwood RV water heater drain plug?
1/2 inchProduct Description. Atwood Water Heater Drain Plug Kit. 1/2 inch. Plastic.
What size socket do I need for an anode rod?
1 1/16-inch4 Use a ratchet wrench and 1 1/16-inch deep socket to unscrew the anode rod from the heater.
What size socket does a water heater element take?
1-1/2 inchNearly all hot water heater element wrenches have a 1-1/2 inch hex to fit the standard 1-1/2 inch residential heating element head. In addition, they're generally at least 5-inches long with cross holes drilled into the opposite end of the pipe so a screwdriver can be inserted for added torque.
How do you drain a Dometic water heater?
CommentMake sure it's off and cool. ... Place a note in a visible location that reminds you to refill the tank before turning the breaker and water heater back on.Slowly open the pressure relief valve to remove any residual pressure.Remove the plastic drain plug and allow the water heater to drain.
How do you drain a jayco hot water heater?
2:564:42Jayco JayCares - RV Water Heater Basics - YouTubeYouTubeStart of suggested clipEnd of suggested clipBefore you open the actual valve. You would want to release your pressure valve to let out a littleMoreBefore you open the actual valve. You would want to release your pressure valve to let out a little bit of that pressure. And you can leave that open during the actual removal.
What size is a suburban water heater drain plug?
If its a Suburban water heater it's 1-1/16" (it's actually the anode rod as much as it is a drain), on mine it requires a socket with a short extension to reach it. If you have a Suburban heater with an Anode Rod it is 1 1/16". If it's an Atwood it should be 7/8 and needs a short extension as well.
Product description
Camco's drain plug wrench is specifically designed for use with RV water heater drain plugs. The angled design conveniently fits in tight spaces and includes prongs for rusted drain valves and petcock drains. Fits both 7/8" and 15/16"Drain plugs. Includes two 1/2" NPT replacement drain plugs and Teflon tape.
Compare with similar items
There was a problem filtering reviews right now. Please try again later.
What is a hot water heater in an RV?
Your RV hot water heater is a pretty important piece of equipment. It’s the gadget that allows you to utilize your RV’s plumbing system as you do at home, complete with comfortable showers, hot water for doing the dishes, and nice warm suds to wash your hands with.
How do I start my RV water heater?
Wondering how to start the hot water in your RV? In most cases, turning it on is easy: you simply locate your RV electric water heater switch and toggle it to “on.” If your camper water heater is in gas mode, the igniter will have to click on the pilot light — or the pilot light may even need to be lit manually. Refer to your RV owner’s manual for full details.
How long do RV water heaters last?
If you care for your RV water heater properly, it may last as long as a decade. Utilizing an anode rod and being sure to drain the tank during winterization will help to preserve your RV water heater and extend its lifespan.
How to prevent hard water corrosion in RV water heater?
To avoid hard-water corrosion inside the tank, install an anode rod. This way, the corrosion will eat away at the rod instead of your tank. They’re easy to install, and you’ll want to check them from time to time. When the rod looks really corroded, remove it and install a new one. Anode rods are relatively inexpensive — generally under 20 bucks — but using one could significantly extend the life of your hot water tank. (And RV hot water heaters, on the other hand, are not so affordable to replace — which we’ll get to in just a moment!)
How to heat water in RV?
There are three main ways to heat the water in a hot water tank for an RV: propane, electricity, or heat from the engine. Electricity (or fuel with an electric ignition) is usually the most convenient because you don’t have to worry about a pilot light going out; just switch on the heater from inside your RV, and in a short time, you’ll have hot water. However, using the heat from your engine for hot water is most economical. The engine’s going to get hot anyway when you’re driving, so it’s nice to be able to put that energy to good use. The downside is that if the engine is off for a while, you may find yourself with a tank of tepid water.
How many gallons of water do you need for a camper?
Most common are 6-gallon or 10-gallon RV water heaters, though you’ll find small 4-gallon ones as well as much larger 16-gallon versions. Generally, the more people who are camping, the bigger the tank you’ll need. Otherwise, you run the risk of depleting your supply before everyone’s had a chance to shower. The main manufacturers of tank-based RV ...
Can you leave a water heater on while camping?
Chances are you don’t constantly turn your water heater at home on and off. Similarly, you can leave your RV hot water heater on for the duration of your camping trip — though there may be some energy-saving benefit to turning it off between uses. (Just make sure you give it ample time to heat up the water before you step into the shower in that case!)
