What size thread do you use for beer taps?
Precision drilled at 3/8"-16, standard beer tap thread for a universal fit on any American kegerator, bar tap or faucet. Replaces a broken or old looking tap handle ferrule to make your expensive beer tap handle look like new. New (5) from $14.59 FREE Shipping on orders over $25.00 shipped by Amazon.
What size should a tap handle be?
Let’s talk guidelines: Standard tap handles typically measure between 9-13” tall and no more than 3” wide and/or deep. Short tap handles, also known as shotgun tap handles, range between 4-6” tall and no more than 3” wide. Always keep the width at 3” or under. A ferrule can be internal or external. Sizing & material affect weight.
What is a threaded fitting tap handle insert?
This threaded fitting tap handle insert is a necessary component as you build your own custom tap handles. Made as a replacement part, this practical piece can also restore your damaged or stripped tap handle thread, so they connect like new. Tap handles and beer knobs require specific threading to attach to the faucet and this fitting has it.
What parts do I need to build my own beer tap handle?
This tap handle thread is perhaps the most necessary of the beer tap handle parts you'll need. Need Help? Chat Now This threaded fitting tap handle insert is a necessary component as you build your own custom tap handles.
Are all beer tap handles the same size?
Standard tap handles typically measure between 9-13” tall and no more than 3” wide and/or deep. Short tap handles, also known as shotgun tap handles, range between 4-6” tall and no more than 3” wide. Always keep the width at 3” or under. A ferrule can be internal or external.
Whats the thread on a beer tap?
Thanks to a miracle of modern standardization, virtually all beer faucets feature either a 3/8"-16 UNC (United States) or M10×1.5mm (everywhere else) external threaded post for mounting a faucet, which means that the only things you need for making your own handle are: Something you can drill a hole into.
What is the handle on a beer tap called?
A tap handle (or faucet handle) is the lever that screws into your draft beer faucet to make it easier to open and close your faucet when pouring. When you want to dispense, pull it forward to pour your beer.
Are all tap handles the same?
No, tap handles are not universal. However, handles made in the United states will be the same nationwide. Any handle created for the US will have a ⅜”-16 UNC thread. This means that the thread will measure ⅜” with 16 threads per inch.
How do you make a keg tap handle?
How-To Make A Wooden Beer Tap HandleStep 1: Cut the wood to size. ... Step 2: Drill space for the threaded insert. ... Step 3: Glue and let dry. ... Step 4: Rough turn it on the lathe. ... Step 5: Sand to perfection. ... Step 6: Coat in walnut oil and let drip dry. ... Step 7: Cure the finish with friction polish.
How do you make your own tap handles?
1:074:5310 Easy DIY Tap Handles for $15 - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe brass insert in there and those are my tap handles for an extra dollar. Buy. These brass insertsMoreThe brass insert in there and those are my tap handles for an extra dollar. Buy. These brass inserts the bit and a piece of wood from your local hardware store and make ten tap panels.
Are there different size taps for kegs?
Many people dont know that there are different beer tap couplers for the different styles of beers for. This is because not all kegs are the same, and are brewed and come from different parts of the world. Below is a list of beer brands and which keg tap (coupler) that will fit each keg.
What is a tap handle?
When you head into a bar or brewery you'll most likely see a metal fixture with a bunch of handles sticking up. Those are what you'd call a tap handle, while you'll traditionally you'll have beer tap handles it's also common to have cider tap handles.
Do taps fit all kegs?
Not all brands of draft beer use the same type of valve in the keg. Each distinct "system" requires matching the appropriate keg coupler to the keg valve. In the U.S., there are eight different "systems" in use: "D" System (American Sankey): Most North American beers.
Are beer taps interchangeable?
Standard Faucets Typically rear-sealing, this beer faucet are widely available in a variety of shapes, sizes and finishes. The standard beer faucet is designed for easy installation and can be swapped out with ease.
What are the best beer taps?
Best Beer TapsPerlick 630SS. A favorite of beer lovers everywhere, the Perlick 630SS Forward Sealing Beer Faucet is constructed of 304 stainless steel. ... NukaTap. The NukaTap is over 20% lighter than its Intertap predecessor, and even lighter still compared to other brands of faucets. ... Stainless Steel Nitro Tap Stout Faucet.
What is a keg coupler?
Keg couplers, also known as keg taps or keg keys, attach to the top of your keg, connecting it to the gas line and the beer line and allowing CO2 to flow into the keg and delicious beer to flow out of it.
What is a keg Shank?
The Beer Shank also called a Faucet Shank is a key component of any draft beer despensing system. It's what connects your beer line to your faucet. Most all shanks will come with a nipple for your beer line to connect to, those without a nipple are referred to as a Pass Through.
How do you attach a shank to a beer faucet?
1:473:41Beginning Brewers Blog #6 - Beer Faucet Installation - Mikes InventionsYouTubeStart of suggested clipEnd of suggested clipAnd then I might just turn the shank here I can actually get that a little bit tighter. Now theMoreAnd then I might just turn the shank here I can actually get that a little bit tighter. Now the faucet simply screws on like this hold it vertical and spin this little collar. You get it hand tight.
How Do You Attach a Beer Tap Handle?
You can easily attach a beer tap handle by screwing it onto the beer faucet lever and turning clockwise.
How to make beer tap handles look sleek?
If you want your simple beer tap handles to look sleek without putting in too much work, an easy way to achieve this is to sand the wood. For decorative purposes, consider buying some chalkboard paint to easily write your beer label (or anything else) on your finished piece. The beauty of DIY projects is that you can adapt them and make them your own, so feel free to get creative here with how you choose to paint the handles.
What Materials Can a Tap Handle Be?
The truth is you can use any material for tap handles: they can be made out of metal, acrylic, wood, resin, or a combination of materials. The easiest to work with at home, however, are wood and resin.
What size threads are used for UNC threads?
In the US, the standard size is ⅜”-16 UNC threads.
Can you make tap handles DIY?
level of perfectionism), you can either take a bare-basic rustic approach or go all out with extreme detail. We won’t judge you either way, so let’s explore both.
Can I Change the Brew Name Without Changing the Tap Handles?
Yes! Changing out the label and using the same handles is becoming increasingly popular. To do this, you’ll need either laminated water-proof decals or metal plates that snap into position. Another easy option is simply to use magnets that stick to the tap itself.
How tall is a standard tap handle?
Standard tap handles typically measure between 9-13” tall and no more than 3” wide and/or deep.
Where are custom beer handles made?
Headquartered in Denver, Custom Beer Handles is now a leading designer and manufacturer of custom tap handles for craft breweries, wineries, coffee, and kombucha companies.
Who makes custom beer handles?
Jessica Pezzotti founded Custom Beer Handles with a mission to change the way craft breweries & beverage companies present their brand to the world. Her desire to disrupt the industry was rooted in a passion for branding and its relation to consumerism. Headquartered in Denver, Custom Beer Handles is now a leading designer and manufacturer of custom tap handles for craft breweries, wineries, coffee, and kombucha companies. The Taps Give Back Program that launched in 2018 donates a portion of the proceeds to charities and non-profit organizations on behalf of their clients. The on-tap phenomenon is just getting started and they are revolutionizing marketing for the craft beer and beverage industry. Last but not least, The Tory Burch Foundation selected Jessica as a 2018 Fellow, an elite program designed for women entrepreneurs nationwide. Cheers to that!
Special offers and product promotions
Create your FREE Amazon Business account to save up to 10% with Business-only prices and free shipping. Register today
Product Description
Sets of individually wrapped (to prevent scratching each other in shipment) polished chrome plated heavy brass ferrules with 1 1/2" long 5/16-18 hanger bolts to make your own custom beer tap handles. Longer hanger bolts are more difficult to work with so we choose harder to find 1 1/2" bolts for your ease in installation.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
How tall is a tap handle?
Location: Greater Chicago. An average tap handle is anywhere from about 9-13" tall, lots of dimensions available online if you're curious, they say how tall they are. A very short tap is in the 4" range, and most taps come with about a 4" delrin handle.
Can you make beer tap handles any size?
beer tap handles can be whatever size you want. Is there unlimited space where this will be installed? What are you going to carve?
What is a tap handle?
What most of us casually call tap handles are more accurately faucet handles. The tap is that coupler thing that you connect to the keg to get the beer out. The faucet is what carries that beer to your glass. Be that as it may, do-it-yourself handles are fun and easy.
How to get beer handle to break?
Instead, simply pull the base of the handle forward using your index and middle fingers and then push it back with your thumb once the glass is full.
How to install knife threads?
Knife thread inserts are most easily installed into wood or plastic by means of a special wide drill bit that attaches to the business end of a power drill or electric screwdriver. First, drill a hole for the insert using a 1/2" Forstner bit. A standard 1/2" bit may work, depending on how hard the surface is that you’re drilling into, but Forstner bits offer a cleaner hole that shouldn’t require sanding or fixing after you drill.
When was Craft Beer and Brewing Magazine issue 9?
When this article appeared in Issue 9 (October/November 2015) of _Craft Beer & Brewing Magazine®, _ we asked that readers submit photos of interesting tap handles they’ve built. In response, one subscriber, Mike from New York, sent us this photo.
Can you turn wood into a tap handle?
As long as you can find a way to get an internal thread of the right pattern into your chosen material, you can turn just about anything into a tap handle. Metal objects will require that you tap the proper thread right into the material itself, but wood and plastic can be converted quite easily using a knife thread insert or a T-nut.
