what tools do i need to trim a tree

3 Must-Have Tools for Trimming Trees

• 1. Pruning shears for simple, clean cuts on bushes or thin tree twigs Also called hand pruners, pruning shears are perfect for cutting small twigs, up to 1 inch in diameter. To touch up small, live branches, look for bypass pruning shears. ...
• 2. Loppers for medium-sized branches on cherry, magnolia and other flower or fruit trees ...
• 3. Pole pruner for the hard-to-reach branches on trees

Full Answer

What is the best tree cutting service?

Tree Trimming Near You

• Home Orchard & Tree Care LLC…. Most work is completed by owner, Andy Asmus and employee, Kirk Huffey. ...
• Top Tree Service LLC…. ...
• MJW Services…. ...
• Bill's Tree Service…. ...
• Blue Mountain Tree Service Brush…. ...
• Elliott's Ttree Care…. ...
• Leland Lawn…
• Hofmeister Tree Service LLC…. ...
• Treewalker, LLC…. ...
• CHIP LOWELL TREE SVC…. ...

What tools do they use to cut down trees?

What Tools Should You Use When Removing a Tree

• Chainsaw. This is the tool most commonly used to cut unwanted trees. ...
• Tree Shear. Another tool that you can use to cut trees with lower branches is a tree shear. ...
• Brush Grubber. You can also make use of brush grubber to uproot small trees, instead of cutting them. ...
• Brush Mower. ...
• Wrapped Up. ...

What should it cost to trim trees?

What Should It Cost To Trim Trees. The average tree trimming cost is $375 to $475 per tree less than 25′ tall.Once you get over 25′ tall the costs will rise given the fact that heavier equipment will be needed, such as: Boom-trucks or a Crane service.

What is the best tool to cut tree branches?

What Is the Best Tool for Cutting Tree Branches?

• Hand Pruners. Hand pruners cut living branches that are less than 3/4 inch in diameter and, compared to larger shears, will allow you better maneuverability among crowded branches.
• Lopping Shears. ...
• Pole Pruners. ...
• Pruning Saws and Chain Saws. ...

How do you easily trim a tree?

0:251:35How To Trim Trees - YouTubeYouTubeStart of suggested clipEnd of suggested clipPut your pruner at a 45 degree angle. And. Make your first undercut eight to twelve inches out onMorePut your pruner at a 45 degree angle. And. Make your first undercut eight to twelve inches out on the limb from the final cut this should be a quarter of the limbs diameter.

What are tree trimmers called?

arboristsTree trimmers and pruners, also called arborists, cut away dead or excess branches from trees or shrubs to clear utility lines, roads, and sidewalks. Many of these workers strive to improve the appearance and health of trees and plants, and some specialize in diagnosing and treating tree diseases.

What are branch cutters called?

Loppers are a type of scissors used for pruning twigs and small branches, like pruning shears with very long handles.

How do you trim tree branches yourself?

3:235:25How to Prune Trees - YouTubeYouTubeStart of suggested clipEnd of suggested clipCut downward and outward close to perpendicular to the limb. The final cut will be made as close toMoreCut downward and outward close to perpendicular to the limb. The final cut will be made as close to the tree as possible without damaging the collar. Air on the side of caution.

What is the difference between trimming and pruning a tree?

Pruning is used to remove unnecessary branches. Trimming, on the other hand, promotes healthy growth. Both services are performed at separate times of the year, using vastly different pieces of equipment, to provide a better aesthetic and healthier landscape.

What are the 4 types of cutting tools?

Different Types of Cutting Tools Materials and Their PropertiesCarbon tool steel.High speed steel tool (HSS)Cemented carbide.Ceramics tool.Cubic boron nitride Tool (CBN)Diamond tool.

Which tree trimmer is best?

Fiskars 9301: Best Economy Choice. ... 3 Best Handle-Operated Pruners. ... Corona Bypass Pruner. ... Zenport 24-Inch Pruner. ... ARS Long-Reach Pruner. ... 2 Best Long-Handled Loppers. ... Fiskars 32-Inch Lopper. ... Power Drive 28-Inch Lopper. Power Drive makes a similar, if slightly shorter, lopper.More items...•

How do you cut a tall tree by yourself?

Use a chainsaw to make the first cut low in the trunk and parallel to the ground. This cut should reach about one-quarter to one-third of the way through the tree trunk. Make a diagonal cut at a 45-degree angle above or below the initial cut, removing a wedge of wood from one side of the tree.

What are forest cutters called?

Loggers cut trees with hand-held power chain saws or mobile felling machines. Logging workers harvest thousands of acres of forests each year. The timber they harvest provides the raw material for countless consumer and industrial products.

What tool cuts bush branches?

Pruning shears for simple, clean cuts on bushes or thin tree twigs. Also called hand pruners, pruning shears are perfect for cutting small twigs, up to 1 inch in diameter. To touch up small, live branches, look for bypass pruning shears.

What tools is used for cutting big branches?

What Garden Tool is Best for Cutting Thick BranchesHand Pruner.Lopper.Pruning Saw.Telescopic Pruner.Rope Saw.Chainsaw.

What chainsaws does Meyer use?

Meyer likes Stihl and Husqvarna chainsaws for professionals and homeowners. Stihl Farm Boss chainsaws come with a cutting bar up to 20 inches long and earn top marks for their power. Stihl chainsaws are only sold through select dealers though, whereas Husqvarnas are available at Lowe’s.

How tall is a pole pruner?

Pole pruners are handy for reaching two- to three-inch-thick branches that are well above your head. The pole averages about eight feet long, but Meyer says you can also buy telescoping pole pruners or connect multiple pole pruners to reach as high as 30 feet.

How does bypass hand shear work?

Meyer says an anvil shears sometimes crushes the branch. Bypass hand shears take the branch off in one clean cut, allowing the tree heal faster.

How long is a chainsaw cutting bar?

Chainsaws can have cutting bars as short as six inches or as long as 20 inches. The smaller chainsaws may also be electric instead of gas-powered. Meyer says electric chainsaws (which use a power cord or a rechargeable battery) are much quieter and vibrate less than gas-powered chainsaws.

How thick can a hand saw be?

Hand saws are helpful for tackling branches up to five inches thick whether you’re standing on the ground or aloft. They come in inexpensive folding versions, or you can spend as much as $150 on one, Meyer says. This Fiskars hand saw is highly rated and a best seller.

What to wear when chainsawing?

Meyer says wearing closed-toe shoes and hearing protection are musts when using a chainsaw, which can register up to 130 decibels. (Anything higher than 80 decibels can cause hearing loss or damage). Foam ear buds or headphones should do the trick.

What is the best tool to cut a tree?

Also known as hand pruners, pruning shears or pruners, these glorified scissors cut through branches between one and two inches thick. Lou Meyer, an arborist for Davey Tree Company in greater Baltimore, calls them the most basic starter tool for tree trimming.

What is the best tool to use for pruning shears?

Sharp tools produce the best cuts and help reduce cutting fatigue. This is why you should use a sharpening device or stone to hone the cutting edges of pruning shears, pole pruners, loppers and other tools. If you have a dull pruning saw, consider having it sharpened professionally or replace the blade for the best results.

How high can a rope saw cut?

A rope saw is an excellent tree pruning tool for cutting limbs up to five inches in diameter. It uses a chain-type cutting blade, and with some effort, you can use it to cut through thicker branches. Most rope saws can help you prune limbs up to 25 feet high while standing on the ground.

What is a pole pruner?

A pole pruner is a perfect tool to trim limbs beyond your reach. They can prune branches up to two inches in diameter . You can choose a bypass pole pruner to make clean cuts to ensure your tree’s health. Opt for a pole pruner that comes with interchangeable cutting tools like a pruning saw and a bypass pruner for versatility when trimming large branches.

What is a pruner saw?

Pruning saws are perfect for cutting limbs with a diameter of three to five inches. With more effort, you can also use them to prune slightly bigger branches. They come with tempered metal blades that remain sharp. Pruning saws cut on both the pull and push stroke, making the process quick, and come in many styles to suit varied needs.

What is the best tool to cut a tree?

A lopper, also called lopping shears, is ideal for cutting branches around two inches in diameter. It comes with a label that specifies the branch size it will cut to help you select the right one. Like hand pruners, loppers come as bypass or anvil. Bypass cutting blades can help you make cleaner cuts without hurting the tree’s tissues, and anvil loppers are ideal for cutting dead limbs. Some loppers are also available with a gear-like feature that helps to improve cutting power. It is best to look for lopping shears with handles of different lengths to increase your reach.

Why is it important to prune trees?

Pruning is an excellent way to promote tree growth and health and keep your landscape beautiful. However, successful tree pruning and trimming require the right tools and equipment. Learning about the tools professional arborists use will help you decide which you need and protect the health of your trees.

How to get rid of sticky sap on pruning tools?

After every use, clean the blades thoroughly. Be sure to remove sticky sap by wiping them with a cloth dipped in some solvent such as turpentine or mineral spirits. Rub the pruning tools with lubricating oil to prevent rust and lubricate the joints and other moving parts to keep them in excellent operating condition.

Why use pruning shears on a tree?

Pruning shears are meant for trimming the branches on smaller trees. Frankly speaking, garden trees wouldn’t be so beautiful if it wasn’t for pruning shears. Because of their size, they are easy to handle and maneuver. This allows for artistic pruning, which is great for decorative purposes.

What is the best machine to decimate a tree stump?

Tree Stump Grind er. The tree stump grinder is a very powerful machine that is used to decimate tree stumps in the fastest possible time. When a grinder is done with a tree stump, it leaves only a heap of sawdust behind. That is how powerful this machine is.

How do grapplers work?

The blades dig into the soil, while the grapplers cling onto the trunk of the tree. The operator then lifts and off comes the tree or stump (along with its roots).

What was the axe used for?

Originally, axes weren’t just meant for the sake of chopping down trees, it was also used fighting and splitting animal bones. As the ax’s popularity grew, it became more of a tree felling tool, rather than a weapon.

How high can a chainsaw cut a tree?

They are smaller in size but they are equally sharp and should be handled with care. An average pole chainsaw is capable of cutting tree branches as wide as 8 inches thick in diameter.

What is the best machine to pull a tree out of the soil?

Tree Spade Machine. These are very expensive heavy-duty machines that are powerful enough to grapple a tree stump and pull it right out of the soil. The good thing about the tree spade is that it can pull a tree out without killing it. It is used mainly for large tree transplants and tree stump removal.

Why did the first humans use firewood?

The earliest humans made use of firewood to keep themselves warm, and also to cook. While their tree felling techniques were primitive, it was still good enough for them to get what they needed out of the trees. Fast forward to the modern-day, and everything has changed.

Why do we prune trees?

Pruning helps trees grow strong and look neat and attractive . One prunes a tree to remove damaged branches, allow for new growth or create a distinctive shape. It's important to do it correctly, so you don't end up damaging the tree. Read on to learn the basics. Steps.

When is the best time to prune a tree?

The best time to prune a tree is during the dormant season, or late winter through early spring. You’ll need pruning shears to cut branches less than 1 inch (2.5 cm) in diameter and a hand saw to remove branches up to 4 inches (10 cm) in diameter. For thicker branches, you can use a small chainsaw.

How to grow a tree that is too thick?

Thin out areas that are thick with branches. Remove branches that cross, then open the plant so that air might circulate and light reach all parts of the plant. In order for trees to grow healthy, they need good air circulation through and around the branches. Branches that are close together foster the growth of fungus and attract more insects.

How does wikihow mark an article as reader approved?

wikiHow marks an article as reader-approved once it receives enough positive feedback. In this case, 93% of readers who voted found the article helpful, earning it our reader-approved status.

Why are branches close together?

Branches that are close together foster the growth of fungus and attract more insects. Eliminate branches that are growing inward, toward the center of the tree. These cause clutter and are not healthy. ...

Why pinch shoots on a sage?

On the plant's growing season, pinch the shoots to encourage thicker growth.

Do you need to disinfect pruning equipment?

Although it is probably not necessary to disinfect your pruning equipment if you avoid cutting into cankers and obviously diseased portions of trees, it probably is better to be safe and disinfect your pruning tools with rubbing alcohol (or any household cleaner) after each cut of a diseased tree.

Why do you have to choose the right time to prune a tree?

You have to select your time or season carefully for pruning. Because the purpose why you are going to prune the tree will be affected greatly by seasons. For example, if you want lighter pruning then you may choose the summer season because the spring is far enough from summer.

Why is it important to prune a tree?

To make a tree look more neat, attractive and to allow them or help them to grow strong, pruning trees are important. One can remove all the unnecessary and awful look from a tree by pruning. By pruning, the damaged branches can be removed which will allow the tree to grow or create a new distinctive shape.

How to cut off a tree branch?

Cut the branches from the underside of them to prevent them from cracking closely to the trunk. Keep several inches distance from the trunk where you are going to cut off the branch. Remove the stub precisely right against the stem collar. After all kind of pruning, wash and clean your pruning equipment.

How to get sunlight to reach all branches?

To make the sunlight reach all the branches and allow uniform air circulation throughout the branches, you should first cut branches that cross. Branches need well air circulation and sunlight as too adjacent branches cause fungus growth rapidly and allow the insects to attack the tree.

How to prune a tree?

2. Analyze The Tree. Secondly, you need to analyze the tree for a few moments. You need to observe the size and shape of the tree and also have to have an imagination about how the tree will look like when you are finished pruning. 3.

Do you need to cut a tree more than you need?

Each cut you are doing to the tree will make the tree more vulnerable to fungus attacks and insect infections. So do not prune the tree more than your absolute need.

Can you cut a tree twice in a season?

Do not prune a tree twice or more in a season. Do not cut its branches or trim it just after a storm attack. Trees need a minimum time to recover on their own.

What is the difference between electric and gas chainsaws?

Although gas-powered chainsaws are easier to use in remote locations , it can be difficult to combine the right amount of gas and oil to power the saw. From an environmental standpoint, gas chainsaws also give off more emissions. Additionally, you need to factor in the ongoing cost of the fuel. Electric chainsaws, on the other hand, eliminate most of these problems. Of course, they come with a whole other set of problems of their own. The primary disadvantage of electric chainsaws is that they require the use of an extension cord. This can significantly limit the range of the saw, making it difficult to reach the base of the tree that you want to cut down. If you’re interested in one, check here https://www.progardentips.com/best-chainsaw-money-ultimate-buying-guide/

What equipment do you need to cut down a tree?

You may also need the following equipment: A Ladder. If you are cutting down a tall tree or if you need it to fall in a certain direction, you may need to attach a rope to it to help direct its fall. This will require the use of a ladder. A Rope.

What is the best way to pull down a tree?

A Rope . A rope can make it easier to pull down parts of the tree or to direct where you want the tree to fall.

How much does a chainsaw cost?

Although you can find inexpensive chainsaws that cost less than $150, they usually are not powerful enough to cut down anything but the smallest trees.

What to wear to protect hearing?

This includes a hard hat and eye protection as well as gloves, boots, and earmuffs to protect your hearing. First Aid Supplies. Be sure to have first aid equipment within easy reach so that you can treat any injuries quickly.

Why do you cut down trees?

A common reason why it may be absolutely necessary is that the tree is dying and could fall and injury people or property . Cutting down a tree can be extremely dangerous.

What are the disadvantages of electric chainsaws?

The primary disadvantage of electric chainsaws is that they require the use of an extension cord. This can significantly limit the range of the saw, making it difficult to reach the base ...