Vitrebond is nice because of the fluoride releasing property. This should help with sensitivity. This can be used as an indirect pulp cap, if deep and not pulp exposure is noted, or as a direct pulp cap if there is a slight exposure of the pulp horn.
What is the working time of vitrebond plus?
Additionally, Vitrebond Plus offers a combination of a 2:30 working time with a short setting time achieved by light curing (20 seconds). Twenty-seven consultants evaluated Vitrebond Plus in over 250 applications.
What instrument should I use to apply vitrebond plus?
A small ball-tipped instrument is perfect for applying the product. Vitrebond Plus should not be used in patients with a known acrylate allergy and is contraindicated for direct pulp capping.
What is vitrebond plus made of?
The liquid contains a modified polyalkenoic acid. Vitrebond Plus provides the major benefits of glass ionomer cements including adhesion to tooth structure and sustained fluoride release. Additionally, Vitrebond Plus offers a combination of a 2:30 working time with a short setting time achieved by light curing (20 seconds).
Should you switch to vitrebond plus for dental restorations?
Seventy-four percent of consultants would switch to Vitrebond Plus, and 96 percent would recommend it to colleagues. Use Vitrebond Plus for the initial cervical portion of Class V restorations. It adheres to dentin without phosphoric acid etching while providing fluoride release for future caries control and a dentin shade for esthetics.
Do you etch after Vitrebond?
Vitrebond Plus liner/base can be used with any type of adhesive (light or self cured; separate etch or self-etch, i.e. - 4th, 5th or 6th generation adhesives) on dentin or enamel.
How long do you cure Vitrebond?
In addition, Vitrebond Plus offers a combination of a working time of just 2 minutes 30 seconds with a short light-cure setting time of 20 seconds. Reduction of the polymerization shrinkage effect. 3M ESPE Filtek™ Z250 Universal Restorative. »An excellent product!
How do you use Dycal and Vitrebond?
Apply the mixed liner/base to the dentin surfaces of the prepared cavity in a thin layer (1/2mm or less) using a dycal applicator. The Vitrebond liner/base has a minimum working time of 2 minutes 40 seconds at room temperature. 4- Cure the Vitrebond liner/base. Then place the restoration.
What would Vitrebond be an example of?
Glass Ionomer This material has been available for more than 30 years. A current version of glass ionomer (GI) is the resin-modified glass ionomer (example: Vitrebond, 3M ESPE).
What is Vitrebond Plus used for?
Vitrebond Plus liner/base offers a strong bond to dentin, sealing the tooth structure to protect against microleakage. This can help reduce postoperative sensitivity. Mixed rightevery time.
Do we cure Vitrebond?
Vitrebond™ is a light-cured, resin-modified glass ionomer (RMGI) liner/base material.
Can you use Dycal and Vitrebond together?
Both studies demonstrated that the pulp–dentin complex response to Vitrebond and Dycal indicated acceptable biocompatibility of these materials and there are no statistically significant difference between calcium hydroxide and Resin-Modified Glass Ionomer.
Do you etch before Dycal?
10 The loss of material from Dycal as a result of acid contact is generally regarded as disadvantageous. Therefore, etching procedure should be done before Dycal application.
Can I use Dycal under composite?
Further studies are necessary to suggest that Dycal can be used without any inhibitions under composite resin restorations, may be in vivo studies with long-term follow-up of the outcome are required.
What can I use instead of Dycal?
Alternatives to Dycal®, such as Fuji Lining, Joy-Cal, and Lime-Lite are much less expensive and produce the same results.
When should desensitizer be placed?
Desensitizer should be placed: after rinsing and lightly drying the tooth.
Is Dycal a liner or base?
Dycal® Calcium Hydroxide Liner is a two-component, rigid-setting, self-curing material designed for use in direct and indirect pulp capping and as a protective liner under dental adhesives, varnishes, filling materials, cements, and other base materials.
Is Vitrebond radiolucent?
The conventional glass ionomer cement, Ketac-Bond, was more radiopaque than the three resin-modified glass ionomer cements. Of the three resin-modified glass ionomer materials, Vitrebond was the most radiopaque and Fuji Lining LC was the least radiopaque.
How do you use light cure liner?
1:355:32TheraCal LC as a liner in a Class II resin based composite restorationYouTubeStart of suggested clipEnd of suggested clipThe layer should not exceed one millimeter in depth to ensure adequate cure manipulate the materialMoreThe layer should not exceed one millimeter in depth to ensure adequate cure manipulate the material into a smooth surface covering all deep dentin. Areas use the tip or ball.
Does Vitrebond contain fluoride?
Vitrebond releases fluoride in similar or higher quantities than other resin modified glass ionomer products and traditional glass ionomer systems.
Can MTA be used for pulp capping?
MTA is a new and biocompatible biomaterial used for dental practice. It has been proved to be an excellent material for repairing of root perforations, apexification, root-end filling, repairing of root resorption and pulp capping.
What is Vitrebond ionomer?
Vitrebond™ light cure glass ionomer liner/base, manufactured by 3M™ ESPE™, is comprised of a powder and a liquid component. The powder component is a light sensitive fluoro-aluminosilicate glass. The liquid component is a light sensitive polyalkenoic acid. The composition is a true glass ionomer exhibiting the major characteristics of glass ionomer products – it bonds to tooth structure, releases fluoride, and is a biocompatible material. Additionally, Vitrebond liner/base offers the unique combination of a prolonged working time with a very short set time achieved by exposure to light from a dental visible light curing unit. Polymerization by light exposure not only eliminates the set time waiting period common to auto set liners, it also provides enhanced mechanical and physical properties. Vitrebond light cure glass ionomer liner/base is indicated for lining and basing applications under composite, amalgam, ceramic, and metal restorations.
Can you use Vitrebond for pulp capping?
Pulp Protection: Vitrebond liner/base is not indicated for direct pulp capping. If a pulp exposure occurs, cover the exposure with a calcium hydroxide material. Place the Vitrebond liner/base over the calcium hydroxide and surrounding dentin to seal and protect the exposure.
Why is vitrebond good?
Vitrebond is nice because of the fluoride releasing property. This should help with sensitivity. This can be used as an indirect pulp cap, if deep and not pulp exposure is noted, or as a direct pulp cap if there is a slight exposure of the pulp horn.
What is Vitrebond 3M?
University of South Florida St. Petersburg. Vitrebond by 3M is a fluoride releasing glass ionomer. This makes a good bas/liner for preparations that are deep, or close to the nerve. Dycal is a calcium hydroxide liner that works as well. Vitrebond is nice because of the fluoride releasing property.
What is the best lining material for pulp exposure?
when there is pulp exposure, the lining material of choice is MTA but it is expensive material. The alternative is to use CaOH lining followed by Vitrobond to ensure a good seal and then good temporary material or even better to place a permanent restoration.
What is the best solution after a localised pulpotomy?
In terms of an exposure, the best solution after a localised pulpotomy is to employ a bio-active material such as MTA or Biodentine. Glass ionomer and calcium hydroxide are irritants to pulpal tissue.
Why do we use liners and bases after cavity preparation?
after cavity preparation liners and bases are applied on the floor and axial wall of the cavity under all definitive direct restorations,This is done to protect the pulp from thermal, chemical and mechanical insults, It will be great if someone gives details of current understanding of pulp protection when the cavity is deep or when it is shallow.
Can you put biodentine over exposed nerves?
If it is very deep, I will place BIODENTINE a product that encourages secondary dentin to grow. I have been successful placing this product over very small exposed nerve.
Is glass ionomer a pulpal irritant?
Glass ionomer and calcium hydroxide are irritants to pulpal tissue. Atraumatic and progressive caries removal is the over arching approach, rather than removing caries to 'almost' the pulp, and then wanting to place a a barrier. Hope this helps!
What is Vitrebond Plus?
3M ESPE Vitrebond Plus is a light-cured, resin-modified glass ionomer base/liner. It is packaged in The Clicker ™ Dispensing System, which provides simultaneous dispensing of the two-components of this liquid-paste system. The composition is based on the original Vitrebond powder/ liquid material. The liquid contains a modified polyalkenoic acid. Vitrebond Plus provides the major benefits of glass ionomer cements including adhesion to tooth structure and sustained fluoride release. Additionally, Vitrebond Plus offers a combination of a 2:30 working time with a short setting time achieved by light curing (20 seconds). Twenty-seven consultants evaluated Vitrebond Plus in over 250 applications. The product received a 96% rating.
Can Vitrebond Plus be used for acrylate allergy?
Vitrebond Plus should not be used in patients with a known acrylate allergy and is contraindicated for direct pulp capping.
Is Vitrebond Plus good?
Overall , consultants found Vitrebond Plus to be an excellent product. The manufacturer’s instructions were found to be clear, and the packaging to be simple and straightforward. The Clicker ™ Dispensing System allows for very easy dispensing followed by hand mixing. Additionally, consultants appreciated the ability to light cure the material and reported the working and setting times to be good. Although all consultants appreciated the even mix of the material, several found the viscosity of the material slightly too flowable. There were no reports of post-operative sensitivity with the use of Vitrebond Plus. Ninety-six percent of consultants found Vitrebond Plus to be equal to or better than their current liner/base. Seventy-four percent of consultants would switch to Vitrebond Plus, and 96 percent would recommend it to colleagues.
