Where is Knaack located?
In 1968, Knaack LLC. moved to its current location at 420 E. Terra Cotta Ave., in Crystal Lake, Illinois, with a new 16,000 sq. ft. facility. In the late 1960s, Mr. Knaack was looking to expand his product offerings to the contractor trade and recognized the need for a high-quality truck tool box.
When was the first Knaack made?
In the fall of 1960, Howard Knaack began building steel KNAACK® jobsite storage tool boxes in a small, one-room shop in Crystal Lake, Illinois.
Where did Howard Knaack start his company?
In the fall of 1960, Howard Knaack began building jobsite storage tool boxes in a small, one-room shop in Crystal Lake, Illinois. Mr. Knaack's main outlet for these boxes was a tool supply distributor owned by his partners named Brock Tool Company.
Why choose Knaack® tool boxes?
In the early 1980s, the entire line of KNAACK® tool boxes was redesigned to offer contractors a more secure, durable and safer-to-use tool box. Gas pistons were added to the KNAACK® Gang Boxes and WEATHER GUARD® Truck Boxes making them easier to open and close, therefore being safer to use than previous versions or competitors' models.
Where is Knaack located?
Where was Howard Knaack's first tool box made?
Who makes WEATHER GUARD tool boxes?
Werner Co.In 2012 Werner Co. announced that it had acquired 100% of the ownership of Knaack LLC. The acquisition brought the industry leading KNAACK® and WEATHER GUARD® brands, which created a product portfolio that can collectively leverage the broader company networks in manufacturing, distribution, sales and marketing.
Where are WEATHER GUARD truck boxes made?
Crystal Lake, IllinoisWEATHER GUARD products are manufactured in Crystal Lake, Illinois. For more information, visit www.weatherguard.com. WernerCo is a privately owned, fully-integrated, international manufacturer and distributor of access products, fall protection equipment, secure storage systems and light duty construction equipment.
Who owns Knaak?
WernerCo acquired 100% ownership of Knaack LLC in 2012. This joining of forces has created a mutually beneficial product portfolio that collectively leverages the broader company networks in manufacturing and distribution, in addition to sales and marketing.
Can you break into a KNAACK box?
This tool storage chest is designed to resist break-in attempts for superior theft protection. It boasts a full-length piano hinge, 16-gauge steel construction with fully arc-welded seams, and a patented WATCHMAN IV Lock System with a 3-point latch and 7-gauge reinforced lock housing.
Who makes Tractor Supply truck tool boxes?
Fuqua IndustriesNational Industries then sold the company to Fuqua Industries in 1978, which answers who makes Tractor Supply tool boxes. Tractor Supply has grown significantly during the past eight decades, stocking multiple product lines and expanding its growth to meet customer demands.
Does Weatherguard have a lifetime warranty?
What is the warranty on WEATHER GUARD® Truck Boxes? WEATHER GUARD® Truck Boxes come with a Limited Lifetime Warranty from manufacturer defects.
How do you lock a Knaack box?
0:472:25KNAACK® - Watchman IV Lock Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipThrough the lock box feeding the carriage bolt through the top hole secure with a lock nut. Be sureMoreThrough the lock box feeding the carriage bolt through the top hole secure with a lock nut. Be sure padlock tab is parallel with a side of lock. Tray.
What size lock do you need for a job box?
What is the recommended padlock for my KNAACK® jobsite boxes? KNAACK® recommends Master Lock #5 or American Lock #50 due to the shackle length and that the U-Bold and Lock Mechanism are developed specifically for that lock.
What size lock do I need for a Jobox?
NOTE: This lock system is designed to be used with a MASTERLOCK®* No. 1, MASTER LOCK No. 5 or AMERICAN LOCK®* No. 50, or an equivalent sized lock.
What is a #1 Master Lock?
The Master Lock No. 1 Laminated Steel Padlock features a 1-3/4in (44mm) reinforced laminated steel lock body providing extra strength and a 15/16in (24mm) tall, 5/16in (8mm) diameter hardened steel shackle for excellent cut resistance.
What size is a number 5 Master Lock?
Product Details. The Master Lock No. 5 Laminated Steel Padlock features a 2in (51mm) wide reinforced laminated steel lock body providing extra strength and a 1in (25mm) tall, 3/8in (10mm) diameter hardened steel shackle for excellent cut resistance.
How do you lock a crescent Jobox?
0:191:41Crescent JOBOX - Lock Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipDown open the chest and insert the eye hook in the lock housing through the top hole on the lockMoreDown open the chest and insert the eye hook in the lock housing through the top hole on the lock retainer. And then fasten the eye hook with the self-tapping.
How do you install a truck job box?
0:132:44How To Install A Truck Box - JOBOX® - Aluminum/Steel Crossover J Bolt ...YouTubeStart of suggested clipEnd of suggested clipEasier position the mounting pad to align with the inside edge of the sidewall. And approximatelyMoreEasier position the mounting pad to align with the inside edge of the sidewall. And approximately four inches from the front bed wall. Press down to ensure firm. Even contact of the adhesive. Repeat.
Where To Buy | KNAACK
KNAACK jobsite storage products are available through leading retailers nationwide. To find local availability, please navigate to a specific product and click "BUY NOW".
Truck Tool Boxes at Tractor Supply Co.
Shop for Truck Tool Boxes at Tractor Supply Co. Buy online, free in-store pickup. Shop today!
Truck Tool Boxes | Buyers Products
Durable truck tool boxes made in the USA. Find underbody, crossover, gullwing, backpack, trailer tongue boxes, and more.
Where was Howard Knaack's toolbox made?
A great American success story! In the fall of 1960, Howard Knaack began building steel KNAACK® jobsite storage tool boxes in a small, one-room shop in Crystal Lake, Illinois. Mr. Knaack's main outlet for these boxes was a tool supply distributor owned by his partners named Brock Tool Company.
Where is Knaack located?
Knaack LLC was the first to offer national distribution of jobsite storage boxes in Chicago, Detroit, Hammond, Cleveland, Denver and Washington D.C. By 1968 Mr. Knaack moved the company to a 16,000 sq. ft. building also located in Crystal Lake, Illinois.
How many sq ft is Knaack?
Over the past 50 years, Knaack LLC’s facility has grown from its modest start in a 2,000 sq. ft. shop to its first 16,000 foot facility at 420 E. Terra Cotta Ave., and now to its current 400,000 + sq. ft. plant. Knaack LLC has achieved strong growth and industry leadership, and has not stopped introducing new products, like the new WEATHER GUARD® Hi-Side Truck Boxes, the new WEATHER GUARD® Low-Profile Steel Boxes, the new WEATHER GUARD® Van Solutions for the Nissan NV and Ford Transit Connect.
Who owns Knaack?
In 2012 Werner Co. announced that it had acquired 100% of the ownership of Knaack LLC. The acquisition brought the industry leading KNAACK® and WEATHER GUARD® brands, which created a product portfolio that can collectively leverage the broader company networks in manufacturing, distribution, sales and marketing.
How does Knaack LLC support the environment?
How does Knaack LLC support the environment? Knaack LLC switched 425 tons of paper printing to Sustainable Forestry Initiative (SFI) Certified paper, recycled over 850 tons of metal scrap, increased recycled content in corrugated packaging to 35%, reduced natural gas consumption 8%, reduced electricity consumption 15% by using light sensors and switching to high-efficiency florescent bulbs, improved the quality of discharge water by reducing chloride levels 30% and total dissolved solids 20%, and reduced air emissions 50% by switching to powder-coat paint process.
Where is Knaack located?
Since the 1960s, Knaack LLC's facility has grown from its modest start in a 2,000-square-foot shop to its current 400,000+-square-foot plant at 420 E. Terra Cotta Ave. The KNAACK® brand name is known in the industry as "The most trusted name in jobsite security.".
Where was Howard Knaack's first tool box made?
Howard Knaack first started making history when he began building jobsite storage tool boxes in a tiny shop in Crystal Lake, Illinois in the fall of 1960. At the time, his main outlet for said boxes was a tool supply distributor owned by his partners, Brock Tool Company.
