What valves are anti-compounding valves?
An Anti-Compounding valve is a relay valve with a double-check valve built into it . To see how anti-compounding works, let's use the example where a truck is stopped on a hill, and while the driver holds the foot brake, the driver also sets the parking brakes.
What type of valve to use?
What Types of Valves are Used In The Oil and Gas Industry?
- Plug Valves. Plug valves are conical or cylindrically-tapered ‘plugs’ that can be rotated inside the valve body to start or stop the flow of medium through the valve or ...
- Bellow-Sealed Valves. Bellow-sealed valves are made of steel and commonly used due to their internal construction and axial movement of the valve stem.
- Ball Valves. ...
- Gate Valves. ...
What is a tricock valve?
The Tricock valve is used to manually check a liquid level in a tank most commonly used on water boilers. Features an aluminum hand wheel. Available in size 1/2".
How does a vacuum petcock work?
The way a vacuum petcock works is the vacuum pulls the diaphragm back, compressing a spring and releasing pressure on a ball or some other sort of valve, this allows fuel to flow around the ball and to the carb. Also, is a Petcock necessary?
Where is the drain petcock located?
What is the valve called that flushes coolant?
How to loosen a worm drive hose?
How does an O-ring valve work?
How much does it cost to replace a valve stem?
Can you open a plastic radiator drain valve?
See 1 more
Where is the petcock valve located on motorcycle?
2:087:21How does a motorcycle petcock work? - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow this is the back of the petcock. It it houses the little diaphragm in here with a little plungerMoreNow this is the back of the petcock. It it houses the little diaphragm in here with a little plunger which moves up and down when vacuum is attached to it when vacuum is applied to it rather vacuum is
Where is the drain petcock on a radiator?
0:201:57Radiator Petcock: 2 Minute Tuesday Shop Tip - YouTubeYouTubeStart of suggested clipEnd of suggested clipWell you climb down underneath here. And you might have a nice little drain underneath here at theMoreWell you climb down underneath here. And you might have a nice little drain underneath here at the bottom of the radiator or petcock. Something that'll make it super easy to drain your radiator.
Where would you find the petcock valve in the cooling system?
Petcock valves may be installed inside a carburetor. Fuel petcocks install in an accessible location of a gravity-fed fuel system.
What does a petcock look like?
0:037:21How does a motorcycle petcock work? - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis one is the the petcock can only draw gas from above. This line right here that's becauseMoreThis one is the the petcock can only draw gas from above. This line right here that's because there's the straw. Inside this filter element. Here just like that.
How do you unclog a radiator petcock?
To unclog a radiator, you have to remove the radiator cap. Open the draining petcock. Get a catch pan and allow the old fluid to flush into the pan. Fill the radiator with distilled water and add a flushing chemical.
How do you open a radiator drain valve?
How To Drain A Radiator:Turn off your heating.Close the thermostatic valve.Close the lockshield valve.Remove the TRV nut.Open the bleed valve.Remove the lockshield valve nut.
What is the purpose of petcock?
0:286:28Petcock Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can think of the petcock is something like a faucet. Between where the fuel is stored and allMoreYou can think of the petcock is something like a faucet. Between where the fuel is stored and all the machinery that uses that fuel to run your bike. It's got three positions that you can switch
How does a petcock drain work?
0:136:27Petcock Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipYes you heard right it's called the petcock the petcock is a valve that turns on and off your mopedsMoreYes you heard right it's called the petcock the petcock is a valve that turns on and off your mopeds gasoline flow specifically it turns on and off the gas flow between the tank and the carburetor.
How does a petcock drain valve work?
A petcock, or sometimes referred to as a fuel tap or fuel valve, is a 2 or 3 way valve on the bottom of your fuel tank. It works by directing fuel from your tank to the carburetors or fuel injectors. Fuel is pulled by either gravity or vacuum from the fuel system.
How do I turn on my fuel petcock?
0:432:54How to use a Fuel Petcock // Fuel Valve // Motorcycle // Yamaha TW200YouTubeStart of suggested clipEnd of suggested clipMake sure that is turned to the on. Position just like that and this will allow fuel to flow fromMoreMake sure that is turned to the on. Position just like that and this will allow fuel to flow from the tank to the carburetor.
How do I turn off the fuel on my petcock?
0:215:08How to use the Motorcycle "Petcock" Fuel Shut Off Valve - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe have three settings to choose from off on or res the reserve tank you simply just switch to theseMoreWe have three settings to choose from off on or res the reserve tank you simply just switch to these you'll notice an arrow. This little piece right here. You can select off on or res.
What happens if you leave the petcock on?
It will have no ill effect on the bike or the engine. The petcock is present to notify the rider that the bike is about to run out of fuel and he needs to refuel soon. So the only negative effect will be that there is a chance that you may actually run out of fuel someday and will be stranded.
Where is the drain on car radiator?
1:382:19How to Replace a Car Radiator : How to Drain Radiator Coolant - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn your petcock you'll see a rubber hose connected to a clear rubber hose. And that's going to goMoreOn your petcock you'll see a rubber hose connected to a clear rubber hose. And that's going to go down through a hole in your lower splash pan.
Where is the drain valve on central heating?
The drainage valve is usually located at the lowest point of your heating system, typically to one side of a downstairs radiator, however, it may also be located outside your property, in which case you won't need to worry as much about any spillages.
How does a petcock drain valve work?
A petcock, or sometimes referred to as a fuel tap or fuel valve, is a 2 or 3 way valve on the bottom of your fuel tank. It works by directing fuel from your tank to the carburetors or fuel injectors. Fuel is pulled by either gravity or vacuum from the fuel system.
Where is the radiator drain on a 2004 Pontiac Grand Am?
Use a 1/4 inch square drive or a 3/16 inch hex drive to open the radiator drain valve. The radiator drain valve is located at the bottom of the radiator tank.
How do you open and close the the radiator drain valve on a…
HelloCustomer I'm not sure what to say except that I have never had much difficulty finding the drain cock. One tidbit I can give you is it is usually on the engine side of the radiator and will turn easily. Here is what GM service information has to say about it.
Radiator drain valves | DIYnot Forums
I disagree with Armo74 in part. The valve the OP linked to will allow you to drain down the system to that level but they will also allow you to drain the radiator only if that's what you want e.g. to allow radiator removal for decorating.
Cant find Radiator Drain Plug, Help!! - GMC Truck Forum
03 Z71 5.3L with 34k miles, and im trying to drain the coolant. theres a nozzle type thing on drivers side of the radiator, by the botom corner, but it has no screws, or anything. it looks like its just a solid sealed plastic nozzle that never had a hole. any help is appreciated.
SOLVED: Radiator drain plug on a 2005 s-10 how get it - Fixya
SOURCE: need to find drain plug on radiator for 1992 S 10 You will find it on the Inside torwards the Motor at the Bottom Passenger Side. It looks like a Wing nut Mounted on the Very Bottom. Do Not Over Torqe this when Loosening because it will not come all the Way off.
Where is the drain petcock located?
Removing the lower radiator hose removes more coolant. A radiator drain petcock is usually located above the bottom of the radiator. So even if you can open it, you’re not draining the radiator completely. That’s why shops always remove the lower radiator hose.
What is the valve called that flushes coolant?
Many DIYers want to flush their car’s coolant themselves and the first obstacle they encounter is finding the radiator drain valve. The valve, called a petcock , has changed since the old days when it was made from brass with a “T” handle.
How to loosen a worm drive hose?
Loosen the hose clamp on the lower radiator hose. If it’s a worm drive clamp, use a screwdriver to loosen it. If it’s a constant tension spring clamp, use a slip jaw pump pliers or a special hose clamp removal pliers to open the clamp and move it away from the radiator neck.
How does an O-ring valve work?
1): Since the O-ring is welded to the seat, the flat portion twists and breaks off. Now the valve can’t be opened. 2): The valve opens slightly and the flat either breaks off or the engine stem breaks off, leaving a portion of the stem inside the valve. Coolant begins leaking out and there’s no way to stop it.
How much does it cost to replace a valve stem?
If you can’t find a replacement valve stem, you’ll have to replace the radiator. Cost—at least $200 if you replace it yourself or up to $600 if you have to take it to a shop. Oh, then there’s the towing charge.
Can you open a plastic radiator drain valve?
But what if your radiator has a drain valve? Well, my advice is: DON’T OPEN IT! Plastic drain valves usually have a flat portion for twisting and an O-ring washer at the end of the valve. Over time, the O-ring welds itself to the drain valve seat. When you try opening the valve you can encounter several really bad scenarios:
What is plastic valve?
Plastic provides a lightweight and economical alternative to metal. All valves have barbs that grip onto tubing for a secure hold. They’re for use with water, oil, air, and inert gas.
What is a barb valve?
To withstand aggressive and corrosive solutions in chemical-processing applications, these valves have a plastic body and a chemical-resistant seal.
What is a quick turn valve?
Also known as luer-lock couplings, quick-turn fittings consist of a plug and a socket that connect with a half turn, so you can easily connect and disconnect your line. Use these valves with water and oil.
What type of seal is used for chemical processing?
For chemical -processing applications in confined areas, these valves have an EPDM seal and a PVC or CPVC body to withstand aggressive and corrosive solutions and a low-profile handle to fit in tight spots.
Where is the drain petcock located?
Removing the lower radiator hose removes more coolant. A radiator drain petcock is usually located above the bottom of the radiator. So even if you can open it, you’re not draining the radiator completely. That’s why shops always remove the lower radiator hose.
What is the valve called that flushes coolant?
Many DIYers want to flush their car’s coolant themselves and the first obstacle they encounter is finding the radiator drain valve. The valve, called a petcock , has changed since the old days when it was made from brass with a “T” handle.
How to loosen a worm drive hose?
Loosen the hose clamp on the lower radiator hose. If it’s a worm drive clamp, use a screwdriver to loosen it. If it’s a constant tension spring clamp, use a slip jaw pump pliers or a special hose clamp removal pliers to open the clamp and move it away from the radiator neck.
How does an O-ring valve work?
1): Since the O-ring is welded to the seat, the flat portion twists and breaks off. Now the valve can’t be opened. 2): The valve opens slightly and the flat either breaks off or the engine stem breaks off, leaving a portion of the stem inside the valve. Coolant begins leaking out and there’s no way to stop it.
How much does it cost to replace a valve stem?
If you can’t find a replacement valve stem, you’ll have to replace the radiator. Cost—at least $200 if you replace it yourself or up to $600 if you have to take it to a shop. Oh, then there’s the towing charge.
Can you open a plastic radiator drain valve?
But what if your radiator has a drain valve? Well, my advice is: DON’T OPEN IT! Plastic drain valves usually have a flat portion for twisting and an O-ring washer at the end of the valve. Over time, the O-ring welds itself to the drain valve seat. When you try opening the valve you can encounter several really bad scenarios:
