Aim at the base of the fire. If you aim at the flames (which is frequently the temptation), the extinguishing agent will fly right through and do no good. You want to hit the fuel.
Why is it important to use a fire extinguisher properly?
Most are quite easy to use, but it can be hard to follow instructions or use them properly when you are stressed at the time of a real fire. That is why it is important to know how to properly use a fire extinguisher so that when the time comes, you can fight fires with confidence.
What part of the fire do you aim the extinguisher?
Aim at the base of the fire. If you aim at the flames (which is frequently the temptation), the extinguishing agent will fly right through and do no good. You want to hit the fuel. Click to see full answer. Also to know is, what part of the fire do you aim the fire extinguisher at?
When using a fire extinguisher I should aim the nozzel?
"When using a fire extinguisher, I should aim the nozzel at what part of the fire?" "When using a fire extinguisher, I should sweep the nozzel from side-to-side while squeezing the handle and aiming at the base of the fire."
What is the function of the valve in a fire extinguisher?
In addition there is also a part of the fire extinguisher that has the function of removing the extinguishing agent known as the valve assembly. Valve. Serves to control (close and open) the flow of contents in the tube. Valve functions in Fire extinguishers is so important, it must use high quality valve.
Do you point a fire extinguisher at the base of a fire?
You should aim the nozzle, hose or horn (on a CO2) at the base of any fire because this is where the fuel is, and this is the part you need to extinguish to stop the fire from continuing. If you simply aim at the flames you will not stop the fire permanently and your extinguisher will be empty before the fire is out.
What part of the fire should you aim the fire extinguisher?
baseAim the nozzle or outlet towards the base of the fire. Squeeze the handles together to discharge the extinguishing agent inside. To stop discharge, release the handles. Sweep the nozzle from side to side as you approach the fire, directing the extinguishing agent at the base of the flames.
Where should you aim a fire extinguisher nozzle when putting out a fire A at the top of the fire B at the base of the fire C at the center of the fire d away from the fire?
Aim: Aim low, pointing the nozzle or hose at the base of the fire. Do not touch the horn on a CO2 extinguisher, it gets very cold and can damage the skin. Squeeze: Squeeze the handle to release the extinguishing agent. Sweep: Sweep from side to side at the base of the fire, the fuel source, until the fire is out.
Where should you aim a fire extinguisher for it to be most effective on a boat?
Only Class A fires can be extinguished with water. You are confident that you can operate your extinguisher effectively: Aim the nozzle at the base of the fire. Hold the unit upright. Sweep from side to side at the base, or use a series of short blasts aimed at the base.
Where should you and a fire extinguisher stream it when extinguishing a fire?
A: Aim the extinguisher nozzle on the hose low, toward the base of the fire. S: Squeeze the handle or lever to discharge the extinguisher. S: Sweep the nozzle back and forth. Keep the fire extinguisher aimed at the base of the fire and move it from side to side until the flames are extinguished.
What are the two golden rules to remember when fighting a fire?
In the event of a fire or other emergency, remember four golden rules: ... Emergency Services: Call no matter how small.Save these numbers on your cell phone: ... Extinguish: Only try to extinguish if safe to do so. ... Fire Action! ... * Using a Fire Extinguisher.P – Pull the pin. ... EMERGENCY NUMBERS.More items...
Why is it important that you tend the nozzle when you have finished using a fire extinguisher containing carbon dioxide?
If the nozzle gets extremely cold, then it is dangerous to use that Extinguisher.
When using a fire extinguisher is it important to stand back about Blank feet?
The correct answer is C, 8 feet. According to FEMA (Federal Emergency Management Agency), it's recommended that you stand 8 feet away when extinguishing a fire. The correct answer is D, Pull, Aim, Squeeze, Sweep.
How to aim a fire extinguisher?
AIM Aim low, pointing the extinguisher nozzle (or its horn or hose) at the base of the fire. NOTE: Do not touch the plastic discharge horn on CO2 extinguishers, it gets very cold and may damage skin.
How to sweep a fire nozzle?
Sweep from side to side. Sweep the nozzle from side to side until the fire is put out.
Where is the pull pin on an extinguisher?
Pull (Pin) Pull pin at the top of the extinguisher, breaking the seal.
How to know what type of fire extinguisher you have?
The best way to know what type of fire extinguisher you have is to look at the label, as shown below. The important thing to remember from this section is to make sure the fire extinguisher you want to use has a label saying it can safely extinguisher the type of fire you’re trying to extinguish.
How to cover the base of a fire?
Use a sweeping motion from side to side to cover the base of the fire.
What is the best decision to make when setting up a fire alarm?
In many cases, the better and safer decision is to trigger a fire alarm, get yourself to safety and help others to safety, and make sure trained fire protection professionals are notified and on the way.
What are the different types of fires?
Fire experts have named the different types of fires using a 5-letter naming system (Type A, Type B, Type C, Type D, and Type K). The type of fire depends on what the fire is burning. The table below explains these different types of fires. Note that these fire types are also known as fire classes. Type of Fire.
Where is the pin on a fire extinguisher?
Many fire extinguishers have a pin near the handle at the top like the one shown in the image below. Begin by removing that pin. In some cases, instead of a pin there’s been a lock latch you’ll have to release or a puncture level you have to press.
What is the common mistake in fire?
A common mistake is to aim into the flames. This won't put out the fire.
When you're actively fighting a fire, should you remember?
When you’re actively fighting the fire, you should remember there may be cases when you’ll have to give up, quit fighting the fire, and evacuate the fire area for your own safety.
Why is it important to know how to use a fire extinguisher?
That is why it is important to know how to properly use a fire extinguisher so that when the time comes, you can fight fires with confidence.
How long does a fire extinguisher last?
Most home fire extinguishers will only operate for about 10 seconds as they are not usually big enough to fight proper fires.
How to sweep fire extinguisher?
Whilst you squeeze the levers you need to sweep the extinguisher back and forth across the base of the fire until it has been totally extinguished. Start at a sensible distance from the fire and then move closer as it is reduced.
What happens if you stop squeezing on an extinguisher?
If you stop squeezing on modern extinguishers the discharge will stop, enabling you to move around and make the most of the extinguishant (contents). DO NOT turn the extinguisher upside down and thump it on the ground like in the old days. If the label says to do this, it is too old and dangerous to use.
How often should you read the instructions on a fire extinguisher?
Keep yourself reminded of the instructions by reading them every once in a while, and always make sure that when a new extinguisher is purchased you again check the instructions.
What to do if you don't have a fire training?
If it has not been offered at your place of work, remind your employer of their legal duty to teach you how to use firefighting equipment with a fire training session. This will improve your confidence greatly. Even though it can seem tempting when you buy a new extinguisher, do not test fire extinguishers.
Where should the aim of a fire be?
The most important thing to do is to aim at the base of the fire as this is where the fuel of the fire is
What is the proper way to extinguish a fire?
Mark Collins (left), the Emergency Coordinator and Life Safety Officer at Harvard University, shows a student the proper way to extinguish a fire. The technique is called PASS: Pull the pin; Aim at the base of the fire; Squeeze the lever slowly; Sweep from side to side. The test fire was produced by a BullEx box, which has sensors to determine where the trainee is aiming and to vary the flames in response, providing a realistic and safe training experience.
Can a student discharge a carbon dioxide extinguisher?
A student discharges a carbon-dioxide extinguisher. “Some students were surprised that even for a small fire, the extinguisher may not always put it out,” said Abigail Licnikas, Environmental Health and Safety Program Manager for DSL. “There is no guarantee that, even for a small fire, the extinguisher is going to put it out and keep it out.”
The function of each part of a fire extinguisher
Each division works to carry out 3 main functions in APAR, namely storing, issuing, and informing.
Safety Tips
The use of safe extinguishers is important so that the extinguishing process can run smoothly and the user can be safe. In addition, the correct classification of APAR is also important, for example:
